DUID 00:04:bd:da:88:9d:e2:28:ba:42:0c:2a:45:35:c4:bd:d9:18
forked to background, child pid [   24.825568][ T5111] 8021q: adding VLAN 0 to HW filter on device bond0
5110
[   24.837457][ T5111] eql: remember to turn off Van-Jacobson compression on your slave devices
Starting sshd: OK

syzkaller
Warning: Permanently added '10.128.0.91' (ED25519) to the list of known hosts.
2024/04/16 18:19:28 ignoring optional flag "sandboxArg"="0"
2024/04/16 18:19:28 parsed 1 programs
syzkaller login: [   41.336240][ T5450] cgroup: Unknown subsys name 'net'
[   41.461611][ T5450] cgroup: Unknown subsys name 'rlimit'
[   49.001162][ T5450] kmemleak: 8 new suspected memory leaks (see /sys/kernel/debug/kmemleak)
2024/04/16 18:19:36 executed programs: 0
[   49.799244][ T5450] Adding 124996k swap on ./swap-file.  Priority:0 extents:1 across:124996k FS
[   49.994123][ T5493] IPVS: ftp: loaded support on port[0] = 21
[   50.026233][ T5467] IPVS: ftp: loaded support on port[0] = 21
[   50.029701][ T5499] IPVS: ftp: loaded support on port[0] = 21
[   50.035498][ T5485] IPVS: ftp: loaded support on port[0] = 21
[   50.067446][ T5481] IPVS: ftp: loaded support on port[0] = 21
[   50.068606][ T5465] IPVS: ftp: loaded support on port[0] = 21
[   50.081629][ T5464] IPVS: ftp: loaded support on port[0] = 21
[   50.093212][ T5469] IPVS: ftp: loaded support on port[0] = 21
[   50.188251][ T5493] chnl_net:caif_netlink_parms(): no params data found
[   50.210738][ T5465] chnl_net:caif_netlink_parms(): no params data found
[   50.219101][ T5467] chnl_net:caif_netlink_parms(): no params data found
[   50.240841][ T5493] bridge0: port 1(bridge_slave_0) entered blocking state
[   50.248119][ T5493] bridge0: port 1(bridge_slave_0) entered disabled state
[   50.255680][ T5493] device bridge_slave_0 entered promiscuous mode
[   50.263394][ T5493] bridge0: port 2(bridge_slave_1) entered blocking state
[   50.270568][ T5493] bridge0: port 2(bridge_slave_1) entered disabled state
[   50.278005][ T5493] device bridge_slave_1 entered promiscuous mode
[   50.312383][ T5499] chnl_net:caif_netlink_parms(): no params data found
[   50.320988][ T5485] chnl_net:caif_netlink_parms(): no params data found
[   50.338867][ T5464] chnl_net:caif_netlink_parms(): no params data found
[   50.364952][ T5493] bond0: (slave bond_slave_0): Enslaving as an active interface with an up link
[   50.378052][ T5493] bond0: (slave bond_slave_1): Enslaving as an active interface with an up link
[   50.393436][ T5469] chnl_net:caif_netlink_parms(): no params data found
[   50.404462][ T5481] chnl_net:caif_netlink_parms(): no params data found
[   50.424222][ T5499] bridge0: port 1(bridge_slave_0) entered blocking state
[   50.431470][ T5499] bridge0: port 1(bridge_slave_0) entered disabled state
[   50.438814][ T5499] device bridge_slave_0 entered promiscuous mode
[   50.450085][ T5485] bridge0: port 1(bridge_slave_0) entered blocking state
[   50.457135][ T5485] bridge0: port 1(bridge_slave_0) entered disabled state
[   50.464595][ T5485] device bridge_slave_0 entered promiscuous mode
[   50.471397][ T5465] bridge0: port 1(bridge_slave_0) entered blocking state
[   50.478857][ T5465] bridge0: port 1(bridge_slave_0) entered disabled state
[   50.486285][ T5465] device bridge_slave_0 entered promiscuous mode
[   50.494991][ T5465] bridge0: port 2(bridge_slave_1) entered blocking state
[   50.502273][ T5465] bridge0: port 2(bridge_slave_1) entered disabled state
[   50.509709][ T5465] device bridge_slave_1 entered promiscuous mode
[   50.518457][ T5493] team0: Port device team_slave_0 added
[   50.526227][ T5493] team0: Port device team_slave_1 added
[   50.536524][ T5499] bridge0: port 2(bridge_slave_1) entered blocking state
[   50.543850][ T5499] bridge0: port 2(bridge_slave_1) entered disabled state
[   50.551422][ T5499] device bridge_slave_1 entered promiscuous mode
[   50.559113][ T5485] bridge0: port 2(bridge_slave_1) entered blocking state
[   50.566157][ T5485] bridge0: port 2(bridge_slave_1) entered disabled state
[   50.573548][ T5485] device bridge_slave_1 entered promiscuous mode
[   50.583610][ T5467] bridge0: port 1(bridge_slave_0) entered blocking state
[   50.591012][ T5467] bridge0: port 1(bridge_slave_0) entered disabled state
[   50.598374][ T5467] device bridge_slave_0 entered promiscuous mode
[   50.607082][ T5467] bridge0: port 2(bridge_slave_1) entered blocking state
[   50.614155][ T5467] bridge0: port 2(bridge_slave_1) entered disabled state
[   50.621572][ T5467] device bridge_slave_1 entered promiscuous mode
[   50.634960][ T5493] batman_adv: batadv0: Adding interface: batadv_slave_0
[   50.642055][ T5493] batman_adv: batadv0: The MTU of interface batadv_slave_0 is too small (1500) to handle the transport of batman-adv packets. Packets going over this interface will be fragmented on layer2 which could impact the performance. Setting the MTU to 1560 would solve the problem.
[   50.668198][ T5493] batman_adv: batadv0: Not using interface batadv_slave_0 (retrying later): interface not active
[   50.681097][ T5493] batman_adv: batadv0: Adding interface: batadv_slave_1
[   50.688025][ T5493] batman_adv: batadv0: The MTU of interface batadv_slave_1 is too small (1500) to handle the transport of batman-adv packets. Packets going over this interface will be fragmented on layer2 which could impact the performance. Setting the MTU to 1560 would solve the problem.
[   50.714333][ T5493] batman_adv: batadv0: Not using interface batadv_slave_1 (retrying later): interface not active
[   50.728793][ T5499] bond0: (slave bond_slave_0): Enslaving as an active interface with an up link
[   50.740799][ T5485] bond0: (slave bond_slave_0): Enslaving as an active interface with an up link
[   50.754777][ T5464] bridge0: port 1(bridge_slave_0) entered blocking state
[   50.761888][ T5464] bridge0: port 1(bridge_slave_0) entered disabled state
[   50.769405][ T5464] device bridge_slave_0 entered promiscuous mode
[   50.786695][ T5493] device hsr_slave_0 entered promiscuous mode
[   50.793170][ T5493] device hsr_slave_1 entered promiscuous mode
[   50.800133][ T5499] bond0: (slave bond_slave_1): Enslaving as an active interface with an up link
[   50.809615][ T5485] bond0: (slave bond_slave_1): Enslaving as an active interface with an up link
[   50.819116][ T5465] bond0: (slave bond_slave_0): Enslaving as an active interface with an up link
[   50.828715][ T5467] bond0: (slave bond_slave_0): Enslaving as an active interface with an up link
[   50.837836][ T5464] bridge0: port 2(bridge_slave_1) entered blocking state
[   50.844996][ T5464] bridge0: port 2(bridge_slave_1) entered disabled state
[   50.852487][ T5464] device bridge_slave_1 entered promiscuous mode
[   50.873479][ T5499] team0: Port device team_slave_0 added
[   50.883023][ T5465] bond0: (slave bond_slave_1): Enslaving as an active interface with an up link
[   50.892720][ T5467] bond0: (slave bond_slave_1): Enslaving as an active interface with an up link
[   50.905973][ T5469] bridge0: port 1(bridge_slave_0) entered blocking state
[   50.913652][ T5469] bridge0: port 1(bridge_slave_0) entered disabled state
[   50.921186][ T5469] device bridge_slave_0 entered promiscuous mode
[   50.927911][ T5481] bridge0: port 1(bridge_slave_0) entered blocking state
[   50.935694][ T5481] bridge0: port 1(bridge_slave_0) entered disabled state
[   50.943225][ T5481] device bridge_slave_0 entered promiscuous mode
[   50.951304][ T5481] bridge0: port 2(bridge_slave_1) entered blocking state
[   50.958483][ T5481] bridge0: port 2(bridge_slave_1) entered disabled state
[   50.966248][ T5481] device bridge_slave_1 entered promiscuous mode
[   50.973498][ T5499] team0: Port device team_slave_1 added
[   50.979769][ T5485] team0: Port device team_slave_0 added
[   50.991081][ T5465] team0: Port device team_slave_0 added
[   50.998634][ T5469] bridge0: port 2(bridge_slave_1) entered blocking state
[   51.006675][ T5469] bridge0: port 2(bridge_slave_1) entered disabled state
[   51.014491][ T5469] device bridge_slave_1 entered promiscuous mode
[   51.029434][ T5469] bond0: (slave bond_slave_0): Enslaving as an active interface with an up link
[   51.044126][ T5485] team0: Port device team_slave_1 added
[   51.050908][ T5464] bond0: (slave bond_slave_0): Enslaving as an active interface with an up link
[   51.060411][ T5465] team0: Port device team_slave_1 added
[   51.066449][ T5467] team0: Port device team_slave_0 added
[   51.073945][ T5469] bond0: (slave bond_slave_1): Enslaving as an active interface with an up link
[   51.087580][ T5499] batman_adv: batadv0: Adding interface: batadv_slave_0
[   51.094781][ T5499] batman_adv: batadv0: The MTU of interface batadv_slave_0 is too small (1500) to handle the transport of batman-adv packets. Packets going over this interface will be fragmented on layer2 which could impact the performance. Setting the MTU to 1560 would solve the problem.
[   51.121221][ T5499] batman_adv: batadv0: Not using interface batadv_slave_0 (retrying later): interface not active
[   51.136221][ T5464] bond0: (slave bond_slave_1): Enslaving as an active interface with an up link
[   51.149628][ T5467] team0: Port device team_slave_1 added
[   51.157972][ T5481] bond0: (slave bond_slave_0): Enslaving as an active interface with an up link
[   51.169229][ T5499] batman_adv: batadv0: Adding interface: batadv_slave_1
[   51.176167][ T5499] batman_adv: batadv0: The MTU of interface batadv_slave_1 is too small (1500) to handle the transport of batman-adv packets. Packets going over this interface will be fragmented on layer2 which could impact the performance. Setting the MTU to 1560 would solve the problem.
[   51.202285][ T5499] batman_adv: batadv0: Not using interface batadv_slave_1 (retrying later): interface not active
[   51.213787][ T5485] batman_adv: batadv0: Adding interface: batadv_slave_0
[   51.220933][ T5485] batman_adv: batadv0: The MTU of interface batadv_slave_0 is too small (1500) to handle the transport of batman-adv packets. Packets going over this interface will be fragmented on layer2 which could impact the performance. Setting the MTU to 1560 would solve the problem.
[   51.247183][ T5485] batman_adv: batadv0: Not using interface batadv_slave_0 (retrying later): interface not active
[   51.260129][ T5465] batman_adv: batadv0: Adding interface: batadv_slave_0
[   51.267154][ T5465] batman_adv: batadv0: The MTU of interface batadv_slave_0 is too small (1500) to handle the transport of batman-adv packets. Packets going over this interface will be fragmented on layer2 which could impact the performance. Setting the MTU to 1560 would solve the problem.
[   51.293644][ T5465] batman_adv: batadv0: Not using interface batadv_slave_0 (retrying later): interface not active
[   51.307084][ T5465] batman_adv: batadv0: Adding interface: batadv_slave_1
[   51.314090][ T5465] batman_adv: batadv0: The MTU of interface batadv_slave_1 is too small (1500) to handle the transport of batman-adv packets. Packets going over this interface will be fragmented on layer2 which could impact the performance. Setting the MTU to 1560 would solve the problem.
[   51.340988][ T5465] batman_adv: batadv0: Not using interface batadv_slave_1 (retrying later): interface not active
[   51.356186][ T5481] bond0: (slave bond_slave_1): Enslaving as an active interface with an up link
[   51.365815][ T5469] team0: Port device team_slave_0 added
[   51.375678][ T5485] batman_adv: batadv0: Adding interface: batadv_slave_1
[   51.382822][ T5485] batman_adv: batadv0: The MTU of interface batadv_slave_1 is too small (1500) to handle the transport of batman-adv packets. Packets going over this interface will be fragmented on layer2 which could impact the performance. Setting the MTU to 1560 would solve the problem.
[   51.409213][ T5485] batman_adv: batadv0: Not using interface batadv_slave_1 (retrying later): interface not active
[   51.423062][ T5464] team0: Port device team_slave_0 added
[   51.436819][ T5465] device hsr_slave_0 entered promiscuous mode
[   51.443478][ T5465] device hsr_slave_1 entered promiscuous mode
[   51.449942][ T5465] debugfs: Directory 'hsr0' with parent 'hsr' already present!
[   51.458422][ T5465] Cannot create hsr debugfs directory
[   51.473086][ T5469] team0: Port device team_slave_1 added
[   51.482834][ T5464] team0: Port device team_slave_1 added
[   51.490794][ T5467] batman_adv: batadv0: Adding interface: batadv_slave_0
[   51.497823][ T5467] batman_adv: batadv0: The MTU of interface batadv_slave_0 is too small (1500) to handle the transport of batman-adv packets. Packets going over this interface will be fragmented on layer2 which could impact the performance. Setting the MTU to 1560 would solve the problem.
[   51.524270][ T5467] batman_adv: batadv0: Not using interface batadv_slave_0 (retrying later): interface not active
[   51.538152][ T5481] team0: Port device team_slave_0 added
[   51.556712][ T5469] batman_adv: batadv0: Adding interface: batadv_slave_0
[   51.563706][ T5469] batman_adv: batadv0: The MTU of interface batadv_slave_0 is too small (1500) to handle the transport of batman-adv packets. Packets going over this interface will be fragmented on layer2 which could impact the performance. Setting the MTU to 1560 would solve the problem.
[   51.590817][ T5469] batman_adv: batadv0: Not using interface batadv_slave_0 (retrying later): interface not active
[   51.601863][ T5467] batman_adv: batadv0: Adding interface: batadv_slave_1
[   51.608917][ T5467] batman_adv: batadv0: The MTU of interface batadv_slave_1 is too small (1500) to handle the transport of batman-adv packets. Packets going over this interface will be fragmented on layer2 which could impact the performance. Setting the MTU to 1560 would solve the problem.
[   51.635164][ T5467] batman_adv: batadv0: Not using interface batadv_slave_1 (retrying later): interface not active
[   51.648135][ T5481] team0: Port device team_slave_1 added
[   51.661072][ T5464] batman_adv: batadv0: Adding interface: batadv_slave_0
[   51.668118][ T5464] batman_adv: batadv0: The MTU of interface batadv_slave_0 is too small (1500) to handle the transport of batman-adv packets. Packets going over this interface will be fragmented on layer2 which could impact the performance. Setting the MTU to 1560 would solve the problem.
[   51.694729][ T5464] batman_adv: batadv0: Not using interface batadv_slave_0 (retrying later): interface not active
[   51.707177][ T5499] device hsr_slave_0 entered promiscuous mode
[   51.713794][ T5499] device hsr_slave_1 entered promiscuous mode
[   51.720240][ T5499] debugfs: Directory 'hsr0' with parent 'hsr' already present!
[   51.728804][ T5499] Cannot create hsr debugfs directory
[   51.736931][ T5469] batman_adv: batadv0: Adding interface: batadv_slave_1
[   51.744553][ T5469] batman_adv: batadv0: The MTU of interface batadv_slave_1 is too small (1500) to handle the transport of batman-adv packets. Packets going over this interface will be fragmented on layer2 which could impact the performance. Setting the MTU to 1560 would solve the problem.
[   51.772015][ T5469] batman_adv: batadv0: Not using interface batadv_slave_1 (retrying later): interface not active
[   51.793071][ T5485] device hsr_slave_0 entered promiscuous mode
[   51.799884][ T5485] device hsr_slave_1 entered promiscuous mode
[   51.806760][ T5485] debugfs: Directory 'hsr0' with parent 'hsr' already present!
[   51.814657][ T5485] Cannot create hsr debugfs directory
[   51.821464][ T5464] batman_adv: batadv0: Adding interface: batadv_slave_1
[   51.829078][ T5464] batman_adv: batadv0: The MTU of interface batadv_slave_1 is too small (1500) to handle the transport of batman-adv packets. Packets going over this interface will be fragmented on layer2 which could impact the performance. Setting the MTU to 1560 would solve the problem.
[   51.856071][ T5464] batman_adv: batadv0: Not using interface batadv_slave_1 (retrying later): interface not active
[   51.886031][ T5481] batman_adv: batadv0: Adding interface: batadv_slave_0
[   51.893308][ T5481] batman_adv: batadv0: The MTU of interface batadv_slave_0 is too small (1500) to handle the transport of batman-adv packets. Packets going over this interface will be fragmented on layer2 which could impact the performance. Setting the MTU to 1560 would solve the problem.
[   51.919350][ T5481] batman_adv: batadv0: Not using interface batadv_slave_0 (retrying later): interface not active
[   51.939858][ T5481] batman_adv: batadv0: Adding interface: batadv_slave_1
[   51.946804][ T5481] batman_adv: batadv0: The MTU of interface batadv_slave_1 is too small (1500) to handle the transport of batman-adv packets. Packets going over this interface will be fragmented on layer2 which could impact the performance. Setting the MTU to 1560 would solve the problem.
[   51.973066][ T5481] batman_adv: batadv0: Not using interface batadv_slave_1 (retrying later): interface not active
[   51.992387][ T5467] device hsr_slave_0 entered promiscuous mode
[   51.998840][ T5467] device hsr_slave_1 entered promiscuous mode
[   52.005269][ T5467] debugfs: Directory 'hsr0' with parent 'hsr' already present!
[   52.012886][   T34] Bluetooth: hci5: command 0x0409 tx timeout
[   52.018914][   T34] Bluetooth: hci4: command 0x0409 tx timeout
[   52.019205][ T3654] Bluetooth: hci2: command 0x0409 tx timeout
[   52.025155][ T5467] Cannot create hsr debugfs directory
[   52.031475][ T3654] Bluetooth: hci3: command 0x0409 tx timeout
[   52.036650][   T34] Bluetooth: hci6: command 0x0409 tx timeout
[   52.042508][ T3654] Bluetooth: hci1: command 0x0409 tx timeout
[   52.060894][ T3654] Bluetooth: hci0: command 0x0409 tx timeout
[   52.061330][ T5493] netdevsim netdevsim0 netdevsim0: renamed from eth0
[   52.076416][ T5469] device hsr_slave_0 entered promiscuous mode
[   52.082876][ T5469] device hsr_slave_1 entered promiscuous mode
[   52.089266][ T5469] debugfs: Directory 'hsr0' with parent 'hsr' already present!
[   52.089636][   T34] Bluetooth: hci7: command 0x0409 tx timeout
[   52.097061][ T5469] Cannot create hsr debugfs directory
[   52.124679][ T5464] device hsr_slave_0 entered promiscuous mode
[   52.131085][ T5464] device hsr_slave_1 entered promiscuous mode
[   52.137303][ T5464] debugfs: Directory 'hsr0' with parent 'hsr' already present!
[   52.144862][ T5464] Cannot create hsr debugfs directory
[   52.151657][ T5493] netdevsim netdevsim0 netdevsim1: renamed from eth1
[   52.159384][ T5493] netdevsim netdevsim0 netdevsim2: renamed from eth2
[   52.167149][ T5493] netdevsim netdevsim0 netdevsim3: renamed from eth3
[   52.199010][ T5481] device hsr_slave_0 entered promiscuous mode
[   52.205622][ T5481] device hsr_slave_1 entered promiscuous mode
[   52.212410][ T5481] debugfs: Directory 'hsr0' with parent 'hsr' already present!
[   52.220310][ T5481] Cannot create hsr debugfs directory
[   52.265251][ T5465] netdevsim netdevsim5 netdevsim0: renamed from eth0
[   52.274949][ T5499] netdevsim netdevsim1 netdevsim0: renamed from eth0
[   52.286767][ T5465] netdevsim netdevsim5 netdevsim1: renamed from eth1
[   52.299384][ T5499] netdevsim netdevsim1 netdevsim1: renamed from eth1
[   52.312518][ T5465] netdevsim netdevsim5 netdevsim2: renamed from eth2
[   52.329542][ T5499] netdevsim netdevsim1 netdevsim2: renamed from eth2
[   52.344933][ T5465] netdevsim netdevsim5 netdevsim3: renamed from eth3
[   52.352501][ T5499] netdevsim netdevsim1 netdevsim3: renamed from eth3
[   52.374785][ T5467] netdevsim netdevsim4 netdevsim0: renamed from eth0
[   52.384459][ T5493] 8021q: adding VLAN 0 to HW filter on device bond0
[   52.396559][ T5467] netdevsim netdevsim4 netdevsim1: renamed from eth1
[   52.404569][ T5467] netdevsim netdevsim4 netdevsim2: renamed from eth2
[   52.422989][ T5467] netdevsim netdevsim4 netdevsim3: renamed from eth3
[   52.434575][ T5493] 8021q: adding VLAN 0 to HW filter on device team0
[   52.457599][ T3654] IPv6: ADDRCONF(NETDEV_CHANGE): veth1: link becomes ready
[   52.467456][ T3654] IPv6: ADDRCONF(NETDEV_CHANGE): veth0: link becomes ready
[   52.474953][ T3654] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_bridge: link becomes ready
[   52.483455][ T3654] IPv6: ADDRCONF(NETDEV_CHANGE): bridge_slave_0: link becomes ready
[   52.491766][ T3654] bridge0: port 1(bridge_slave_0) entered blocking state
[   52.498890][ T3654] bridge0: port 1(bridge_slave_0) entered forwarding state
[   52.506483][ T3654] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_bridge: link becomes ready
[   52.514939][ T3654] IPv6: ADDRCONF(NETDEV_CHANGE): bridge_slave_1: link becomes ready
[   52.523433][ T3654] bridge0: port 2(bridge_slave_1) entered blocking state
[   52.530556][ T3654] bridge0: port 2(bridge_slave_1) entered forwarding state
[   52.538040][ T3654] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_bond: link becomes ready
[   52.546669][ T3654] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_bond: link becomes ready
[   52.561746][    T5] IPv6: ADDRCONF(NETDEV_CHANGE): bridge0: link becomes ready
[   52.569768][    T5] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_team: link becomes ready
[   52.577916][    T5] IPv6: ADDRCONF(NETDEV_CHANGE): team_slave_0: link becomes ready
[   52.586822][    T5] IPv6: ADDRCONF(NETDEV_CHANGE): team0: link becomes ready
[   52.598006][ T5493] hsr0: Slave A (hsr_slave_0) is not up; please bring it up to get a fully working HSR network
[   52.608671][ T5493] hsr0: Slave B (hsr_slave_1) is not up; please bring it up to get a fully working HSR network
[   52.625911][ T5499] 8021q: adding VLAN 0 to HW filter on device bond0
[   52.636433][ T5485] netdevsim netdevsim6 netdevsim0: renamed from eth0
[   52.644790][   T17] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_team: link becomes ready
[   52.653806][   T17] IPv6: ADDRCONF(NETDEV_CHANGE): team_slave_1: link becomes ready
[   52.662202][   T17] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_hsr: link becomes ready
[   52.670491][   T17] IPv6: ADDRCONF(NETDEV_CHANGE): hsr_slave_0: link becomes ready
[   52.678432][   T17] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_hsr: link becomes ready
[   52.686729][   T17] IPv6: ADDRCONF(NETDEV_CHANGE): hsr_slave_1: link becomes ready
[   52.699619][ T5485] netdevsim netdevsim6 netdevsim1: renamed from eth1
[   52.708999][ T5485] netdevsim netdevsim6 netdevsim2: renamed from eth2
[   52.717104][   T17] IPv6: ADDRCONF(NETDEV_CHANGE): hsr0: link becomes ready
[   52.725366][   T17] IPv6: ADDRCONF(NETDEV_CHANGE): veth1: link becomes ready
[   52.733870][   T17] IPv6: ADDRCONF(NETDEV_CHANGE): veth0: link becomes ready
[   52.746273][ T5464] netdevsim netdevsim3 netdevsim0: renamed from eth0
[   52.757296][ T5485] netdevsim netdevsim6 netdevsim3: renamed from eth3
[   52.770648][ T5499] 8021q: adding VLAN 0 to HW filter on device team0
[   52.781701][ T5464] netdevsim netdevsim3 netdevsim1: renamed from eth1
[   52.791263][ T5464] netdevsim netdevsim3 netdevsim2: renamed from eth2
[   52.799349][ T5464] netdevsim netdevsim3 netdevsim3: renamed from eth3
[   52.808317][ T5465] 8021q: adding VLAN 0 to HW filter on device bond0
[   52.815354][ T5543] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_bridge: link becomes ready
[   52.824127][ T5543] IPv6: ADDRCONF(NETDEV_CHANGE): bridge_slave_0: link becomes ready
[   52.832620][ T5543] bridge0: port 1(bridge_slave_0) entered blocking state
[   52.839658][ T5543] bridge0: port 1(bridge_slave_0) entered forwarding state
[   52.847584][ T5543] IPv6: ADDRCONF(NETDEV_CHANGE): vxcan1: link becomes ready
[   52.855208][ T5543] IPv6: ADDRCONF(NETDEV_CHANGE): vxcan0: link becomes ready
[   52.862919][ T5543] IPv6: ADDRCONF(NETDEV_CHANGE): bridge0: link becomes ready
[   52.873823][ T5493] 8021q: adding VLAN 0 to HW filter on device batadv0
[   52.890122][ T5543] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_bridge: link becomes ready
[   52.898665][ T5543] IPv6: ADDRCONF(NETDEV_CHANGE): bridge_slave_1: link becomes ready
[   52.907126][ T5543] bridge0: port 2(bridge_slave_1) entered blocking state
[   52.914356][ T5543] bridge0: port 2(bridge_slave_1) entered forwarding state
[   52.922890][ T5543] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_bond: link becomes ready
[   52.931270][ T5543] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_bond: link becomes ready
[   52.939639][ T5543] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_team: link becomes ready
[   52.947762][ T5543] IPv6: ADDRCONF(NETDEV_CHANGE): team_slave_0: link becomes ready
[   52.968650][ T5467] 8021q: adding VLAN 0 to HW filter on device bond0
[   52.976113][   T34] IPv6: ADDRCONF(NETDEV_CHANGE): team0: link becomes ready
[   52.988289][ T5465] 8021q: adding VLAN 0 to HW filter on device team0
[   53.002706][   T17] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_team: link becomes ready
[   53.011236][   T17] IPv6: ADDRCONF(NETDEV_CHANGE): team_slave_1: link becomes ready
[   53.019554][   T17] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_hsr: link becomes ready
[   53.027621][   T17] IPv6: ADDRCONF(NETDEV_CHANGE): hsr_slave_0: link becomes ready
[   53.036053][   T17] IPv6: ADDRCONF(NETDEV_CHANGE): veth1: link becomes ready
[   53.043628][   T17] IPv6: ADDRCONF(NETDEV_CHANGE): veth0: link becomes ready
[   53.051149][   T17] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_hsr: link becomes ready
[   53.059487][   T17] IPv6: ADDRCONF(NETDEV_CHANGE): hsr_slave_1: link becomes ready
[   53.067462][   T17] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_bridge: link becomes ready
[   53.075996][   T17] IPv6: ADDRCONF(NETDEV_CHANGE): bridge_slave_0: link becomes ready
[   53.084611][   T17] bridge0: port 1(bridge_slave_0) entered blocking state
[   53.091653][   T17] bridge0: port 1(bridge_slave_0) entered forwarding state
[   53.099469][   T17] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_bridge: link becomes ready
[   53.107796][   T17] IPv6: ADDRCONF(NETDEV_CHANGE): bridge_slave_1: link becomes ready
[   53.116213][   T17] bridge0: port 2(bridge_slave_1) entered blocking state
[   53.123499][   T17] bridge0: port 2(bridge_slave_1) entered forwarding state
[   53.131021][   T17] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_bond: link becomes ready
[   53.139417][   T17] IPv6: ADDRCONF(NETDEV_CHANGE): bridge0: link becomes ready
[   53.147457][ T5469] netdevsim netdevsim7 netdevsim0: renamed from eth0
[   53.160259][ T5469] netdevsim netdevsim7 netdevsim1: renamed from eth1
[   53.167839][ T5469] netdevsim netdevsim7 netdevsim2: renamed from eth2
[   53.176375][ T5499] IPv6: ADDRCONF(NETDEV_CHANGE): hsr0: link becomes ready
[   53.186964][ T5467] 8021q: adding VLAN 0 to HW filter on device team0
[   53.203771][ T5493] device veth0_vlan entered promiscuous mode
[   53.211137][ T5469] netdevsim netdevsim7 netdevsim3: renamed from eth3
[   53.220412][ T5543] IPv6: ADDRCONF(NETDEV_CHANGE): veth1: link becomes ready
[   53.228156][ T5543] IPv6: ADDRCONF(NETDEV_CHANGE): veth0: link becomes ready
[   53.235937][ T5543] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_virt_wifi: link becomes ready
[   53.245609][ T5543] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_virt_wifi: link becomes ready
[   53.254713][ T5543] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_vlan: link becomes ready
[   53.263401][ T5543] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_vlan: link becomes ready
[   53.271764][ T5543] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_bond: link becomes ready
[   53.287638][ T5493] device veth1_vlan entered promiscuous mode
[   53.305517][ T5465] hsr0: Slave A (hsr_slave_0) is not up; please bring it up to get a fully working HSR network
[   53.316685][ T5465] hsr0: Slave B (hsr_slave_1) is not up; please bring it up to get a fully working HSR network
[   53.330364][ T5543] IPv6: ADDRCONF(NETDEV_CHANGE): vlan0: link becomes ready
[   53.337915][ T5543] IPv6: ADDRCONF(NETDEV_CHANGE): vlan1: link becomes ready
[   53.346184][ T5543] IPv6: ADDRCONF(NETDEV_CHANGE): macvlan0: link becomes ready
[   53.354511][ T5543] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_bridge: link becomes ready
[   53.363163][ T5543] IPv6: ADDRCONF(NETDEV_CHANGE): bridge_slave_0: link becomes ready
[   53.371697][ T5543] bridge0: port 1(bridge_slave_0) entered blocking state
[   53.378889][ T5543] bridge0: port 1(bridge_slave_0) entered forwarding state
[   53.386621][ T5543] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_bridge: link becomes ready
[   53.395384][ T5543] IPv6: ADDRCONF(NETDEV_CHANGE): bridge_slave_1: link becomes ready
[   53.403721][ T5543] bridge0: port 2(bridge_slave_1) entered blocking state
[   53.410777][ T5543] bridge0: port 2(bridge_slave_1) entered forwarding state
[   53.418373][ T5543] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_team: link becomes ready
[   53.426812][ T5543] IPv6: ADDRCONF(NETDEV_CHANGE): team_slave_0: link becomes ready
[   53.435083][ T5543] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_team: link becomes ready
[   53.443377][ T5543] IPv6: ADDRCONF(NETDEV_CHANGE): team_slave_1: link becomes ready
[   53.452002][ T5543] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_hsr: link becomes ready
[   53.460340][ T5543] IPv6: ADDRCONF(NETDEV_CHANGE): hsr_slave_0: link becomes ready
[   53.468387][ T5543] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_hsr: link becomes ready
[   53.476650][ T5543] IPv6: ADDRCONF(NETDEV_CHANGE): hsr_slave_1: link becomes ready
[   53.489695][ T5543] IPv6: ADDRCONF(NETDEV_CHANGE): macvlan1: link becomes ready
[   53.497688][ T5543] IPv6: ADDRCONF(NETDEV_CHANGE): bridge0: link becomes ready
[   53.505476][ T5543] IPv6: ADDRCONF(NETDEV_CHANGE): team0: link becomes ready
[   53.523053][ T5485] 8021q: adding VLAN 0 to HW filter on device bond0
[   53.540169][   T34] IPv6: ADDRCONF(NETDEV_CHANGE): hsr0: link becomes ready
[   53.547685][   T34] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_bond: link becomes ready
[   53.557503][   T34] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_bond: link becomes ready
[   53.566179][   T34] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_team: link becomes ready
[   53.574623][   T34] IPv6: ADDRCONF(NETDEV_CHANGE): team_slave_0: link becomes ready
[   53.582989][   T34] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_team: link becomes ready
[   53.591330][   T34] IPv6: ADDRCONF(NETDEV_CHANGE): team_slave_1: link becomes ready
[   53.599595][   T34] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_hsr: link becomes ready
[   53.607613][   T34] IPv6: ADDRCONF(NETDEV_CHANGE): hsr_slave_0: link becomes ready
[   53.615974][   T34] IPv6: ADDRCONF(NETDEV_CHANGE): vxcan1: link becomes ready
[   53.623554][   T34] IPv6: ADDRCONF(NETDEV_CHANGE): vxcan0: link becomes ready
[   53.631145][   T34] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_hsr: link becomes ready
[   53.643055][   T34] IPv6: ADDRCONF(NETDEV_CHANGE): hsr_slave_1: link becomes ready
[   53.651706][   T17] IPv6: ADDRCONF(NETDEV_CHANGE): team0: link becomes ready
[   53.660127][ T5481] netdevsim netdevsim2 netdevsim0: renamed from eth0
[   53.668156][ T5481] netdevsim netdevsim2 netdevsim1: renamed from eth1
[   53.675975][ T5481] netdevsim netdevsim2 netdevsim2: renamed from eth2
[   53.687792][ T5499] 8021q: adding VLAN 0 to HW filter on device batadv0
[   53.695827][ T5467] IPv6: ADDRCONF(NETDEV_CHANGE): hsr0: link becomes ready
[   53.707353][ T5493] device veth0_macvtap entered promiscuous mode
[   53.715444][ T5481] netdevsim netdevsim2 netdevsim3: renamed from eth3
[   53.724824][ T5464] 8021q: adding VLAN 0 to HW filter on device bond0
[   53.735553][ T5485] 8021q: adding VLAN 0 to HW filter on device team0
[   53.747169][ T5465] 8021q: adding VLAN 0 to HW filter on device batadv0
[   53.755289][    T5] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_macvtap: link becomes ready
[   53.763690][    T5] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_macvtap: link becomes ready
[   53.772504][    T5] IPv6: ADDRCONF(NETDEV_CHANGE): veth1: link becomes ready
[   53.780158][    T5] IPv6: ADDRCONF(NETDEV_CHANGE): veth0: link becomes ready
[   53.787591][    T5] IPv6: ADDRCONF(NETDEV_CHANGE): vxcan1: link becomes ready
[   53.795176][    T5] IPv6: ADDRCONF(NETDEV_CHANGE): vxcan0: link becomes ready
[   53.804644][ T5493] device veth1_macvtap entered promiscuous mode
[   53.821317][ T5493] batman_adv: batadv0: Interface activated: batadv_slave_0
[   53.830166][    T5] IPv6: ADDRCONF(NETDEV_CHANGE): macvtap0: link becomes ready
[   53.838069][    T5] IPv6: ADDRCONF(NETDEV_CHANGE): macsec0: link becomes ready
[   53.846829][    T5] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_virt_wifi: link becomes ready
[   53.855502][    T5] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_virt_wifi: link becomes ready
[   53.864647][    T5] IPv6: ADDRCONF(NETDEV_CHANGE): batadv_slave_0: link becomes ready
[   53.873043][    T5] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_batadv: link becomes ready
[   53.886735][ T5464] 8021q: adding VLAN 0 to HW filter on device team0
[   53.899589][ T5493] batman_adv: batadv0: Interface activated: batadv_slave_1
[   53.913590][ T5467] 8021q: adding VLAN 0 to HW filter on device batadv0
[   53.921447][ T5503] IPv6: ADDRCONF(NETDEV_CHANGE): veth1: link becomes ready
[   53.928954][ T5503] IPv6: ADDRCONF(NETDEV_CHANGE): veth0: link becomes ready
[   53.936874][ T5503] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_vlan: link becomes ready
[   53.945082][ T5503] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_vlan: link becomes ready
[   53.953546][ T5503] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_bridge: link becomes ready
[   53.962163][ T5503] IPv6: ADDRCONF(NETDEV_CHANGE): bridge_slave_0: link becomes ready
[   53.970497][ T5503] bridge0: port 1(bridge_slave_0) entered blocking state
[   53.977715][ T5503] bridge0: port 1(bridge_slave_0) entered forwarding state
[   53.985379][ T5503] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_bridge: link becomes ready
[   53.994023][ T5503] IPv6: ADDRCONF(NETDEV_CHANGE): bridge_slave_0: link becomes ready
[   54.002287][ T5503] bridge0: port 1(bridge_slave_0) entered blocking state
[   54.009333][ T5503] bridge0: port 1(bridge_slave_0) entered forwarding state
[   54.016945][ T5503] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_bridge: link becomes ready
[   54.025652][ T5503] IPv6: ADDRCONF(NETDEV_CHANGE): bridge_slave_1: link becomes ready
[   54.034026][ T5503] bridge0: port 2(bridge_slave_1) entered blocking state
[   54.041086][ T5503] bridge0: port 2(bridge_slave_1) entered forwarding state
[   54.048617][ T5503] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_bond: link becomes ready
[   54.057259][ T5503] IPv6: ADDRCONF(NETDEV_CHANGE): batadv_slave_1: link becomes ready
[   54.065653][ T5503] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_batadv: link becomes ready
[   54.074199][ T5503] IPv6: ADDRCONF(NETDEV_CHANGE): vxcan1: link becomes ready
[   54.081920][ T5503] IPv6: ADDRCONF(NETDEV_CHANGE): vxcan0: link becomes ready
[   54.089426][   T34] Bluetooth: hci1: command 0x041b tx timeout
[   54.089465][   T34] Bluetooth: hci6: command 0x041b tx timeout
[   54.089487][   T34] Bluetooth: hci3: command 0x041b tx timeout
[   54.089512][   T34] Bluetooth: hci4: command 0x041b tx timeout
[   54.089534][   T34] Bluetooth: hci2: command 0x041b tx timeout
[   54.096964][ T5503] IPv6: ADDRCONF(NETDEV_CHANGE): vlan0: link becomes ready
[   54.102798][   T34] Bluetooth: hci5: command 0x041b tx timeout
[   54.108493][ T5503] IPv6: ADDRCONF(NETDEV_CHANGE): vlan1: link becomes ready
[   54.141768][ T5503] IPv6: ADDRCONF(NETDEV_CHANGE): bridge0: link becomes ready
[   54.149481][ T5503] IPv6: ADDRCONF(NETDEV_CHANGE): bridge0: link becomes ready
[   54.157433][ T5503] Bluetooth: hci0: command 0x041b tx timeout
[   54.164257][ T5469] 8021q: adding VLAN 0 to HW filter on device bond0
[   54.169466][   T17] Bluetooth: hci7: command 0x041b tx timeout
[   54.188620][ T5465] device veth0_vlan entered promiscuous mode
[   54.196848][ T5493] netdevsim netdevsim0 netdevsim0: set [1, 0] type 2 family 0 port 6081 - 0
[   54.206038][ T5493] netdevsim netdevsim0 netdevsim1: set [1, 0] type 2 family 0 port 6081 - 0
[   54.215761][ T5493] netdevsim netdevsim0 netdevsim2: set [1, 0] type 2 family 0 port 6081 - 0
[   54.224872][ T5493] netdevsim netdevsim0 netdevsim3: set [1, 0] type 2 family 0 port 6081 - 0
[   54.234370][ T5499] device veth0_vlan entered promiscuous mode
[   54.247204][   T34] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_bridge: link becomes ready
[   54.255779][   T34] IPv6: ADDRCONF(NETDEV_CHANGE): bridge_slave_1: link becomes ready
[   54.264283][   T34] bridge0: port 2(bridge_slave_1) entered blocking state
[   54.271353][   T34] bridge0: port 2(bridge_slave_1) entered forwarding state
[   54.279064][   T34] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_virt_wifi: link becomes ready
[   54.288052][   T34] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_virt_wifi: link becomes ready
[   54.296571][   T34] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_vlan: link becomes ready
[   54.304988][   T34] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_vlan: link becomes ready
[   54.313393][   T34] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_bond: link becomes ready
[   54.322063][   T34] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_bond: link becomes ready
[   54.330927][   T34] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_team: link becomes ready
[   54.339399][   T34] IPv6: ADDRCONF(NETDEV_CHANGE): team_slave_0: link becomes ready
[   54.347824][   T34] IPv6: ADDRCONF(NETDEV_CHANGE): vlan0: link becomes ready
[   54.355559][   T34] IPv6: ADDRCONF(NETDEV_CHANGE): vlan1: link becomes ready
[   54.363157][   T34] IPv6: ADDRCONF(NETDEV_CHANGE): team0: link becomes ready
[   54.376255][ T5469] 8021q: adding VLAN 0 to HW filter on device team0
[   54.391618][ T5465] device veth1_vlan entered promiscuous mode
[   54.412215][ T5485] hsr0: Slave A (hsr_slave_0) is not up; please bring it up to get a fully working HSR network
[   54.423089][ T5485] hsr0: Slave B (hsr_slave_1) is not up; please bring it up to get a fully working HSR network
[   54.436129][ T3654] IPv6: ADDRCONF(NETDEV_CHANGE): macvlan0: link becomes ready
[   54.444456][ T3654] IPv6: ADDRCONF(NETDEV_CHANGE): veth1: link becomes ready
[   54.452354][ T3654] IPv6: ADDRCONF(NETDEV_CHANGE): veth0: link becomes ready
[   54.459814][ T3654] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_bridge: link becomes ready
[   54.468471][ T3654] IPv6: ADDRCONF(NETDEV_CHANGE): bridge_slave_0: link becomes ready
[   54.476909][ T3654] bridge0: port 1(bridge_slave_0) entered blocking state
[   54.484051][ T3654] bridge0: port 1(bridge_slave_0) entered forwarding state
[   54.491614][ T3654] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_bridge: link becomes ready
[   54.499994][ T3654] IPv6: ADDRCONF(NETDEV_CHANGE): bridge_slave_1: link becomes ready
[   54.508106][ T3654] bridge0: port 2(bridge_slave_1) entered blocking state
[   54.515233][ T3654] bridge0: port 2(bridge_slave_1) entered forwarding state
[   54.522700][ T3654] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_bond: link becomes ready
[   54.531046][ T3654] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_bond: link becomes ready
[   54.539413][ T3654] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_team: link becomes ready
[   54.547552][ T3654] IPv6: ADDRCONF(NETDEV_CHANGE): team_slave_0: link becomes ready
[   54.555969][ T3654] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_team: link becomes ready
[   54.564278][ T3654] IPv6: ADDRCONF(NETDEV_CHANGE): team_slave_1: link becomes ready
[   54.572621][ T3654] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_hsr: link becomes ready
[   54.580940][ T3654] IPv6: ADDRCONF(NETDEV_CHANGE): hsr_slave_0: link becomes ready
[   54.590300][ T3654] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_hsr: link becomes ready
[   54.598461][ T3654] IPv6: ADDRCONF(NETDEV_CHANGE): hsr_slave_1: link becomes ready
[   54.613229][ T5464] hsr0: Slave A (hsr_slave_0) is not up; please bring it up to get a fully working HSR network
[   54.623643][ T5464] hsr0: Slave B (hsr_slave_1) is not up; please bring it up to get a fully working HSR network
[   54.640042][ T5499] device veth1_vlan entered promiscuous mode
[   54.654622][ T5481] 8021q: adding VLAN 0 to HW filter on device bond0
[   54.666198][ T5469] hsr0: Slave A (hsr_slave_0) is not up; please bring it up to get a fully working HSR network
[   54.677241][ T5469] hsr0: Slave B (hsr_slave_1) is not up; please bring it up to get a fully working HSR network
[   54.688815][ T3654] IPv6: ADDRCONF(NETDEV_CHANGE): macvlan0: link becomes ready
[   54.697332][ T3654] IPv6: ADDRCONF(NETDEV_CHANGE): bridge0: link becomes ready
[   54.705727][ T3654] IPv6: ADDRCONF(NETDEV_CHANGE): team0: link becomes ready
[   54.713772][ T3654] IPv6: ADDRCONF(NETDEV_CHANGE): hsr0: link becomes ready
[   54.721821][ T3654] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_bond: link becomes ready
[   54.731218][ T3654] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_team: link becomes ready
[   54.740514][ T3654] IPv6: ADDRCONF(NETDEV_CHANGE): team_slave_1: link becomes ready
[   54.749053][ T3654] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_team: link becomes ready
[   54.758266][ T3654] IPv6: ADDRCONF(NETDEV_CHANGE): team_slave_0: link becomes ready
[   54.766761][ T3654] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_hsr: link becomes ready
[   54.775177][ T3654] IPv6: ADDRCONF(NETDEV_CHANGE): hsr_slave_0: link becomes ready
[   54.783730][ T3654] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_team: link becomes ready
[   54.792188][ T3654] IPv6: ADDRCONF(NETDEV_CHANGE): team_slave_1: link becomes ready
[   54.800621][ T3654] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_hsr: link becomes ready
[   54.808751][ T3654] IPv6: ADDRCONF(NETDEV_CHANGE): hsr_slave_1: link becomes ready
[   54.817520][ T3654] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_hsr: link becomes ready
[   54.825923][ T3654] IPv6: ADDRCONF(NETDEV_CHANGE): hsr_slave_0: link becomes ready
[   54.834427][ T3654] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_hsr: link becomes ready
[   54.842781][ T3654] IPv6: ADDRCONF(NETDEV_CHANGE): hsr_slave_1: link becomes ready
[   54.858832][ T5465] device veth0_macvtap entered promiscuous mode
[   54.868647][ T3654] IPv6: ADDRCONF(NETDEV_CHANGE): team0: link becomes ready
[   54.876539][ T3654] IPv6: ADDRCONF(NETDEV_CHANGE): hsr0: link becomes ready
[   54.885007][ T3654] IPv6: ADDRCONF(NETDEV_CHANGE): hsr0: link becomes ready
[   54.892592][ T3654] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_macvtap: link becomes ready
[   54.901015][ T3654] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_macvtap: link becomes ready
[   54.909563][ T3654] IPv6: ADDRCONF(NETDEV_CHANGE): macvtap0: link becomes ready
[   54.929679][   T41] wlan0: Created IBSS using preconfigured BSSID 50:50:50:50:50:50
[   54.937509][   T41] wlan0: Creating new IBSS network, BSSID 50:50:50:50:50:50
[   54.942985][ T5481] 8021q: adding VLAN 0 to HW filter on device team0
[   54.955105][ T5465] device veth1_macvtap entered promiscuous mode
[   54.977797][ T5583] wlan1: Created IBSS using preconfigured BSSID 50:50:50:50:50:50
[   54.985838][   T17] IPv6: ADDRCONF(NETDEV_CHANGE): macsec0: link becomes ready
[   54.993980][   T17] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   54.994961][ T5583] wlan1: Creating new IBSS network, BSSID 50:50:50:50:50:50
[   55.002076][   T17] IPv6: ADDRCONF(NETDEV_CHANGE): veth1: link becomes ready
[   55.002362][   T17] IPv6: ADDRCONF(NETDEV_CHANGE): veth0: link becomes ready
[   55.002568][   T17] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_virt_wifi: link becomes ready
[   55.002865][   T17] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_virt_wifi: link becomes ready
[   55.041644][   T17] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
[   55.049280][   T17] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_bridge: link becomes ready
[   55.057726][   T17] IPv6: ADDRCONF(NETDEV_CHANGE): bridge_slave_0: link becomes ready
[   55.066348][   T17] bridge0: port 1(bridge_slave_0) entered blocking state
[   55.073375][   T17] bridge0: port 1(bridge_slave_0) entered forwarding state
[   55.081092][   T17] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_bridge: link becomes ready
[   55.089635][   T17] IPv6: ADDRCONF(NETDEV_CHANGE): bridge_slave_1: link becomes ready
[   55.097992][   T17] bridge0: port 2(bridge_slave_1) entered blocking state
[   55.105055][   T17] bridge0: port 2(bridge_slave_1) entered forwarding state
[   55.112681][   T17] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_bond: link becomes ready
[   55.121088][   T17] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_bond: link becomes ready
[   55.136699][ T5465] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   55.147237][ T5465] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   55.158087][ T5465] batman_adv: batadv0: Interface activated: batadv_slave_0
[   55.167623][ T5465] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   55.178749][ T5465] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   55.189317][ T5465] batman_adv: batadv0: Interface activated: batadv_slave_1
[   55.204337][ T5467] device veth0_vlan entered promiscuous mode
[   55.211292][   T17] IPv6: ADDRCONF(NETDEV_CHANGE): bridge0: link becomes ready
[   55.219046][   T17] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_vlan: link becomes ready
[   55.227539][   T17] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_vlan: link becomes ready
[   55.235858][   T17] IPv6: ADDRCONF(NETDEV_CHANGE): batadv_slave_0: link becomes ready
[   55.244995][   T17] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_batadv: link becomes ready
[   55.253659][   T17] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_macvtap: link becomes ready
[   55.262122][   T17] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_macvtap: link becomes ready
[   55.270608][   T17] IPv6: ADDRCONF(NETDEV_CHANGE): batadv_slave_1: link becomes ready
[   55.279069][   T17] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_batadv: link becomes ready
[   55.287758][   T17] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_team: link becomes ready
[   55.296400][   T17] IPv6: ADDRCONF(NETDEV_CHANGE): team_slave_0: link becomes ready
[   55.305248][   T17] IPv6: ADDRCONF(NETDEV_CHANGE): vxcan1: link becomes ready
[   55.313218][   T17] IPv6: ADDRCONF(NETDEV_CHANGE): vxcan0: link becomes ready
[   55.322185][   T17] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_team: link becomes ready
[   55.330871][   T17] IPv6: ADDRCONF(NETDEV_CHANGE): team_slave_1: link becomes ready
[   55.339104][   T17] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_hsr: link becomes ready
[   55.347413][   T17] IPv6: ADDRCONF(NETDEV_CHANGE): hsr_slave_0: link becomes ready
[   55.355580][   T17] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_hsr: link becomes ready
[   55.363984][   T17] IPv6: ADDRCONF(NETDEV_CHANGE): hsr_slave_1: link becomes ready
[   55.373576][ T5499] device veth0_macvtap entered promiscuous mode
[   55.382318][ T5465] netdevsim netdevsim5 netdevsim0: set [1, 0] type 2 family 0 port 6081 - 0
[   55.391282][ T5465] netdevsim netdevsim5 netdevsim1: set [1, 0] type 2 family 0 port 6081 - 0
[   55.400378][ T5465] netdevsim netdevsim5 netdevsim2: set [1, 0] type 2 family 0 port 6081 - 0
[   55.409188][ T5465] netdevsim netdevsim5 netdevsim3: set [1, 0] type 2 family 0 port 6081 - 0
[   55.427704][ T5467] device veth1_vlan entered promiscuous mode
[   55.434486][   T17] IPv6: ADDRCONF(NETDEV_CHANGE): vlan0: link becomes ready
[   55.442984][   T17] IPv6: ADDRCONF(NETDEV_CHANGE): vlan1: link becomes ready
[   55.450693][   T17] IPv6: ADDRCONF(NETDEV_CHANGE): macvlan0: link becomes ready
[   55.458354][   T17] IPv6: ADDRCONF(NETDEV_CHANGE): macvtap0: link becomes ready
[   55.466356][   T17] IPv6: ADDRCONF(NETDEV_CHANGE): team0: link becomes ready
[   55.475583][ T5485] 8021q: adding VLAN 0 to HW filter on device batadv0
[   55.484388][ T5499] device veth1_macvtap entered promiscuous mode
[   55.499210][   T17] IPv6: ADDRCONF(NETDEV_CHANGE): macsec0: link becomes ready
[   55.507003][   T17] IPv6: ADDRCONF(NETDEV_CHANGE): vxcan1: link becomes ready
[   55.514814][   T17] IPv6: ADDRCONF(NETDEV_CHANGE): vxcan0: link becomes ready
[   55.523802][ T5481] IPv6: ADDRCONF(NETDEV_CHANGE): hsr0: link becomes ready
[   55.536949][ T5493] cgroup: cgroup: disabling cgroup2 socket matching due to net_prio or net_cls activation
[   55.540465][ T5543] IPv6: ADDRCONF(NETDEV_CHANGE): macvlan1: link becomes ready
[   55.555353][ T5543] IPv6: ADDRCONF(NETDEV_CHANGE): vxcan1: link becomes ready
[   55.562907][ T5543] IPv6: ADDRCONF(NETDEV_CHANGE): vxcan0: link becomes ready
[   55.579759][ T5464] 8021q: adding VLAN 0 to HW filter on device batadv0
[   55.593899][ T5499] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   55.608306][ T5499] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   55.618446][ T5499] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   55.628990][ T5499] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   55.641623][ T5499] batman_adv: batadv0: Interface activated: batadv_slave_0
[   55.657526][ T5467] device veth0_macvtap entered promiscuous mode
[   55.669357][ T5583] wlan0: Created IBSS using preconfigured BSSID 50:50:50:50:50:50
[   55.677175][ T5583] wlan0: Creating new IBSS network, BSSID 50:50:50:50:50:50
[   55.678184][ T5467] device veth1_macvtap entered promiscuous mode
[   55.692747][ T5469] 8021q: adding VLAN 0 to HW filter on device batadv0
[   55.706837][ T3654] IPv6: ADDRCONF(NETDEV_CHANGE): batadv_slave_0: link becomes ready
[   55.716042][ T3654] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_batadv: link becomes ready
[   55.724799][ T3654] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_macvtap: link becomes ready
[   55.733688][ T3654] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_macvtap: link becomes ready
[   55.742116][ T3654] IPv6: ADDRCONF(NETDEV_CHANGE): macsec0: link becomes ready
[   55.750021][ T3654] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   55.757564][ T3654] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_virt_wifi: link becomes ready
[   55.766253][ T3654] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_virt_wifi: link becomes ready
[   55.775262][ T3654] IPv6: ADDRCONF(NETDEV_CHANGE): macvtap0: link becomes ready
[   55.788716][   T22] wlan1: Created IBSS using preconfigured BSSID 50:50:50:50:50:50
[   55.792940][ T5467] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   55.797067][   T22] wlan1: Creating new IBSS network, BSSID 50:50:50:50:50:50
[   55.808165][ T5467] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   55.824414][ T5467] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   55.835049][ T5467] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   55.845111][ T5467] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   55.856000][ T5467] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   55.866755][ T5467] batman_adv: batadv0: Interface activated: batadv_slave_0
[   55.880950][ T5467] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   55.891860][ T5467] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   55.902252][ T5467] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   55.913070][ T5543] usb 1-1: new high-speed USB device number 2 using dummy_hcd
[   55.920021][ T5467] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   55.931178][ T5467] batman_adv: batadv0: Interface activated: batadv_slave_1
[   55.939906][ T5499] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   55.950597][ T5499] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   55.960928][ T5499] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   55.971774][ T5499] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   55.981900][ T5499] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   55.992734][ T5499] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   56.003474][ T5499] batman_adv: batadv0: Interface activated: batadv_slave_1
[   56.013657][ T3724] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
[   56.021480][ T3724] IPv6: ADDRCONF(NETDEV_CHANGE): batadv_slave_0: link becomes ready
[   56.030110][ T3724] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_batadv: link becomes ready
[   56.038733][ T3724] IPv6: ADDRCONF(NETDEV_CHANGE): batadv_slave_1: link becomes ready
[   56.047321][ T3724] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_batadv: link becomes ready
[   56.056047][ T3724] IPv6: ADDRCONF(NETDEV_CHANGE): batadv_slave_1: link becomes ready
[   56.064711][ T3724] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_batadv: link becomes ready
[   56.080659][ T5467] netdevsim netdevsim4 netdevsim0: set [1, 0] type 2 family 0 port 6081 - 0
[   56.089716][ T5467] netdevsim netdevsim4 netdevsim1: set [1, 0] type 2 family 0 port 6081 - 0
[   56.098392][ T5467] netdevsim netdevsim4 netdevsim2: set [1, 0] type 2 family 0 port 6081 - 0
[   56.107406][ T5467] netdevsim netdevsim4 netdevsim3: set [1, 0] type 2 family 0 port 6081 - 0
[   56.123737][ T5481] 8021q: adding VLAN 0 to HW filter on device batadv0
[   56.131414][ T5499] netdevsim netdevsim1 netdevsim0: set [1, 0] type 2 family 0 port 6081 - 0
[   56.140544][ T5499] netdevsim netdevsim1 netdevsim1: set [1, 0] type 2 family 0 port 6081 - 0
[   56.149423][ T5499] netdevsim netdevsim1 netdevsim2: set [1, 0] type 2 family 0 port 6081 - 0
[   56.158143][ T5499] netdevsim netdevsim1 netdevsim3: set [1, 0] type 2 family 0 port 6081 - 0
[   56.169593][ T5464] device veth0_vlan entered promiscuous mode
[   56.175648][   T34] Bluetooth: hci0: command 0x040f tx timeout
[   56.182605][ T3724] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_virt_wifi: link becomes ready
[   56.191435][ T3724] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_virt_wifi: link becomes ready
[   56.200545][ T3724] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_vlan: link becomes ready
[   56.208656][ T3724] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_vlan: link becomes ready
[   56.216978][ T3724] IPv6: ADDRCONF(NETDEV_CHANGE): vxcan1: link becomes ready
[   56.224892][ T3724] IPv6: ADDRCONF(NETDEV_CHANGE): vxcan0: link becomes ready
[   56.237192][ T5485] device veth0_vlan entered promiscuous mode
[   56.243604][ T3724] Bluetooth: hci5: command 0x040f tx timeout
[   56.253402][ T3724] Bluetooth: hci2: command 0x040f tx timeout
[   56.259556][ T3724] Bluetooth: hci4: command 0x040f tx timeout
[   56.265545][ T3724] Bluetooth: hci3: command 0x040f tx timeout
[   56.271926][ T3724] Bluetooth: hci6: command 0x040f tx timeout
[   56.277991][ T3724] Bluetooth: hci1: command 0x040f tx timeout
[   56.284168][ T5543] usb 1-1: too many endpoints for config 0 interface 0 altsetting 0: 253, using maximum allowed: 30
[   56.295256][ T5543] usb 1-1: config 0 interface 0 altsetting 0 endpoint 0x81 has an invalid bInterval 0, changing to 7
[   56.306604][ T5543] usb 1-1: config 0 interface 0 altsetting 0 endpoint 0x81 has invalid wMaxPacketSize 0
[   56.316620][ T5543] usb 1-1: config 0 interface 0 altsetting 0 has 1 endpoint descriptor, different from the interface descriptor's value: 253
[   56.330076][ T5543] usb 1-1: New USB device found, idVendor=056a, idProduct=0093, bcdDevice= 0.40
[   56.339632][ T5543] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[   56.348287][   T17] Bluetooth: hci7: command 0x040f tx timeout
[   56.354600][ T5543] usb 1-1: config 0 descriptor??
[   56.369104][ T3724] IPv6: ADDRCONF(NETDEV_CHANGE): vlan0: link becomes ready
[   56.377148][ T3724] IPv6: ADDRCONF(NETDEV_CHANGE): vlan1: link becomes ready
[   56.384980][ T3724] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_vlan: link becomes ready
[   56.393419][ T3724] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_vlan: link becomes ready
[   56.403473][ T3724] IPv6: ADDRCONF(NETDEV_CHANGE): vlan0: link becomes ready
[   56.411625][ T3724] IPv6: ADDRCONF(NETDEV_CHANGE): vlan1: link becomes ready
[   56.421421][ T5464] device veth1_vlan entered promiscuous mode
[   56.439588][ T5485] device veth1_vlan entered promiscuous mode
[   56.473751][ T5503] IPv6: ADDRCONF(NETDEV_CHANGE): macvlan0: link becomes ready
[   56.482530][ T5503] IPv6: ADDRCONF(NETDEV_CHANGE): macvlan1: link becomes ready
[   56.491343][ T5503] IPv6: ADDRCONF(NETDEV_CHANGE): macvlan0: link becomes ready
[   56.499573][ T5503] IPv6: ADDRCONF(NETDEV_CHANGE): macvlan1: link becomes ready
[   56.507631][ T5503] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_virt_wifi: link becomes ready
[   56.516646][ T5503] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_virt_wifi: link becomes ready
[   56.525596][ T5503] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_vlan: link becomes ready
[   56.533919][ T5503] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_vlan: link becomes ready
[   56.542243][ T5503] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_virt_wifi: link becomes ready
[   56.550919][ T5503] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_virt_wifi: link becomes ready
[   56.560594][ T5469] device veth0_vlan entered promiscuous mode
[   56.570492][ T3654] IPv6: ADDRCONF(NETDEV_CHANGE): vlan0: link becomes ready
[   56.578128][ T3654] IPv6: ADDRCONF(NETDEV_CHANGE): vlan1: link becomes ready
[   56.601755][ T5583] wlan0: Created IBSS using preconfigured BSSID 50:50:50:50:50:50
[   56.608185][ T5485] device veth0_macvtap entered promiscuous mode
[   56.610213][ T5583] wlan0: Creating new IBSS network, BSSID 50:50:50:50:50:50
[   56.620927][ T5469] device veth1_vlan entered promiscuous mode
[   56.634039][ T5481] device veth0_vlan entered promiscuous mode
[   56.641828][ T3724] IPv6: ADDRCONF(NETDEV_CHANGE): macvlan0: link becomes ready
[   56.650528][ T3724] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   56.658342][ T3724] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_macvtap: link becomes ready
[   56.666903][ T3724] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_macvtap: link becomes ready
[   56.675782][ T3724] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_vlan: link becomes ready
[   56.684271][ T3724] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_vlan: link becomes ready
[   56.691924][   T17] usb 6-1: new high-speed USB device number 2 using dummy_hcd
[   56.701749][ T5485] device veth1_macvtap entered promiscuous mode
[   56.715699][  T229] wlan0: Created IBSS using preconfigured BSSID 50:50:50:50:50:50
[   56.720721][ T5540] IPv6: ADDRCONF(NETDEV_CHANGE): macvtap0: link becomes ready
[   56.724756][ T5583] wlan1: Created IBSS using preconfigured BSSID 50:50:50:50:50:50
[   56.732809][ T5540] IPv6: ADDRCONF(NETDEV_CHANGE): macsec0: link becomes ready
[   56.743293][  T229] wlan0: Creating new IBSS network, BSSID 50:50:50:50:50:50
[   56.751011][ T5540] IPv6: ADDRCONF(NETDEV_CHANGE): vlan0: link becomes ready
[   56.759289][ T5583] wlan1: Creating new IBSS network, BSSID 50:50:50:50:50:50
[   56.763213][ T5540] IPv6: ADDRCONF(NETDEV_CHANGE): vlan1: link becomes ready
[   56.776751][ T5540] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   56.784756][ T5540] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
[   56.795958][ T5481] device veth1_vlan entered promiscuous mode
[   56.805884][ T5464] device veth0_macvtap entered promiscuous mode
[   56.815757][ T5464] device veth1_macvtap entered promiscuous mode
[   56.828118][    T7] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_macvtap: link becomes ready
[   56.836710][    T7] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_macvtap: link becomes ready
[   56.840138][ T5543] wacom 0003:056A:0093.0001: item fetching failed at offset 0/1
[   56.845477][    T7] IPv6: ADDRCONF(NETDEV_CHANGE): macsec0: link becomes ready
[   56.852680][ T5543] wacom 0003:056A:0093.0001: parse failed
[   56.861963][    T7] IPv6: ADDRCONF(NETDEV_CHANGE): macvtap0: link becomes ready
[   56.865616][ T5543] wacom: probe of 0003:056A:0093.0001 failed with error -22
[   56.874576][  T229] wlan1: Created IBSS using preconfigured BSSID 50:50:50:50:50:50
[   56.883600][ T5485] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   56.889011][  T229] wlan1: Creating new IBSS network, BSSID 50:50:50:50:50:50
[   56.905328][ T5485] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   56.916967][ T5485] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   56.929392][ T5485] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   56.939813][ T5485] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   56.950411][ T5485] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   56.960493][ T5485] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   56.971427][ T5485] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   56.982549][ T5485] batman_adv: batadv0: Interface activated: batadv_slave_0
[   56.995622][ T5485] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   57.006506][ T5485] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   57.017319][ T5485] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   57.028724][ T5485] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   57.039088][ T5485] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   57.049826][ T5485] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   57.060772][ T5485] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   57.064569][ T5543] usb 1-1: USB disconnect, device number 2
[   57.071877][ T5485] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   57.088201][ T5485] batman_adv: batadv0: Interface activated: batadv_slave_1
[   57.089307][   T17] usb 6-1: too many endpoints for config 0 interface 0 altsetting 0: 253, using maximum allowed: 30
[   57.098506][ T5464] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   57.113859][   T17] usb 6-1: config 0 interface 0 altsetting 0 endpoint 0x81 has an invalid bInterval 0, changing to 7
[   57.117802][ T5464] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   57.127923][   T17] usb 6-1: config 0 interface 0 altsetting 0 endpoint 0x81 has invalid wMaxPacketSize 0
[   57.138744][ T5464] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   57.147723][   T17] usb 6-1: config 0 interface 0 altsetting 0 has 1 endpoint descriptor, different from the interface descriptor's value: 253
[   57.159208][ T5464] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   57.172318][   T17] usb 6-1: New USB device found, idVendor=056a, idProduct=0093, bcdDevice= 0.40
[   57.182321][ T5464] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   57.190622][   T17] usb 6-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[   57.201400][ T5464] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   57.219192][ T5464] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   57.219453][   T17] usb 6-1: config 0 descriptor??
[   57.235373][ T5464] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   57.245228][ T5464] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   57.255807][ T5464] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   57.267397][ T5464] batman_adv: batadv0: Interface activated: batadv_slave_0
[   57.276709][    T7] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
[   57.285310][    T7] IPv6: ADDRCONF(NETDEV_CHANGE): batadv_slave_0: link becomes ready
[   57.294183][    T7] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_batadv: link becomes ready
[   57.302787][    T7] IPv6: ADDRCONF(NETDEV_CHANGE): batadv_slave_1: link becomes ready
[   57.311374][    T7] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_batadv: link becomes ready
[   57.320018][    T7] IPv6: ADDRCONF(NETDEV_CHANGE): batadv_slave_0: link becomes ready
[   57.328534][    T7] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_batadv: link becomes ready
[   57.347517][ T5481] device veth0_macvtap entered promiscuous mode
[   57.356849][ T5485] netdevsim netdevsim6 netdevsim0: set [1, 0] type 2 family 0 port 6081 - 0
[   57.366044][ T5485] netdevsim netdevsim6 netdevsim1: set [1, 0] type 2 family 0 port 6081 - 0
[   57.375589][ T5485] netdevsim netdevsim6 netdevsim2: set [1, 0] type 2 family 0 port 6081 - 0
[   57.384658][ T5485] netdevsim netdevsim6 netdevsim3: set [1, 0] type 2 family 0 port 6081 - 0
[   57.395944][ T5464] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   57.406404][ T5464] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   57.416521][ T5464] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   57.427356][ T5464] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   57.437567][ T5464] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   57.448531][ T5464] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   57.458826][ T5464] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   57.469464][ T5464] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   57.479577][ T5464] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   57.490111][ T5464] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   57.501391][ T5464] batman_adv: batadv0: Interface activated: batadv_slave_1
[   57.514288][ T5469] device veth0_macvtap entered promiscuous mode
[   57.529078][ T5543] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_macvtap: link becomes ready
[   57.538584][ T5543] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_macvtap: link becomes ready
[   57.547327][ T5543] IPv6: ADDRCONF(NETDEV_CHANGE): batadv_slave_1: link becomes ready
[   57.558996][ T5543] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_batadv: link becomes ready
[   57.567672][ T5543] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_macvtap: link becomes ready
2024/04/16 18:19:44 executed programs: 8
[   57.577865][ T5543] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_macvtap: link becomes ready
[   57.588942][ T5481] device veth1_macvtap entered promiscuous mode
[   57.599796][ T5464] netdevsim netdevsim3 netdevsim0: set [1, 0] type 2 family 0 port 6081 - 0
[   57.613351][ T5464] netdevsim netdevsim3 netdevsim1: set [1, 0] type 2 family 0 port 6081 - 0
[   57.625144][ T5464] netdevsim netdevsim3 netdevsim2: set [1, 0] type 2 family 0 port 6081 - 0
[   57.634293][ T5464] netdevsim netdevsim3 netdevsim3: set [1, 0] type 2 family 0 port 6081 - 0
[   57.645823][ T5469] device veth1_macvtap entered promiscuous mode
[   57.653356][ T5543] IPv6: ADDRCONF(NETDEV_CHANGE): macvtap0: link becomes ready
[   57.661440][ T5543] IPv6: ADDRCONF(NETDEV_CHANGE): macsec0: link becomes ready
[   57.669640][ T5543] IPv6: ADDRCONF(NETDEV_CHANGE): macvtap0: link becomes ready
[   57.677730][ T5543] IPv6: ADDRCONF(NETDEV_CHANGE): macsec0: link becomes ready
[   57.710084][   T17] wacom 0003:056A:0093.0002: item fetching failed at offset 0/1
[   57.719396][   T17] wacom 0003:056A:0093.0002: parse failed
[   57.734888][   T17] wacom: probe of 0003:056A:0093.0002 failed with error -22
[   57.738578][ T5469] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   57.753381][ T5469] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   57.763356][ T5469] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   57.774528][ T5469] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   57.784894][ T5469] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   57.795506][ T5469] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   57.805327][ T5469] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   57.815874][ T5469] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   57.825942][ T5503] usb 2-1: new high-speed USB device number 2 using dummy_hcd
[   57.825945][ T5469] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   57.825962][ T5469] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   57.825976][ T5469] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   57.865392][ T5469] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   57.876225][ T5469] batman_adv: batadv0: Interface activated: batadv_slave_0
[   57.887488][ T5481] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   57.898884][ T5481] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   57.909262][    T5] usb 1-1: new high-speed USB device number 3 using dummy_hcd
[   57.909353][ T5481] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   57.917742][ T5571] usb 6-1: USB disconnect, device number 2
[   57.933350][ T5481] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   57.933363][ T5481] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   57.933375][ T5481] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   57.933381][ T5481] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   57.933391][ T5481] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   57.933401][ T5481] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   57.933411][ T5481] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   57.933425][ T5481] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   57.989176][ T3654] usb 5-1: new high-speed USB device number 2 using dummy_hcd
[   57.995195][ T5481] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   58.032714][ T5481] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   58.043441][ T5481] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   58.054249][ T5481] batman_adv: batadv0: Interface activated: batadv_slave_0
[   58.064310][   T17] IPv6: ADDRCONF(NETDEV_CHANGE): batadv_slave_0: link becomes ready
[   58.073518][   T17] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_batadv: link becomes ready
[   58.082448][   T17] IPv6: ADDRCONF(NETDEV_CHANGE): batadv_slave_0: link becomes ready
[   58.091285][   T17] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_batadv: link becomes ready
[   58.107555][ T5469] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   58.118837][ T5469] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   58.128890][ T5469] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   58.140310][ T5469] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   58.150259][ T5469] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   58.161019][ T5469] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   58.171201][ T5469] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   58.181860][ T5469] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   58.191951][ T5469] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   58.202554][ T5469] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   58.212528][ T5469] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   58.223110][ T5469] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   58.229246][ T5503] usb 2-1: too many endpoints for config 0 interface 0 altsetting 0: 253, using maximum allowed: 30
[   58.234147][ T5469] batman_adv: batadv0: Interface activated: batadv_slave_1
[   58.244440][ T5503] usb 2-1: config 0 interface 0 altsetting 0 endpoint 0x81 has an invalid bInterval 0, changing to 7
[   58.251693][ T5602] Bluetooth: hci0: command 0x0419 tx timeout
[   58.263093][ T5503] usb 2-1: config 0 interface 0 altsetting 0 endpoint 0x81 has invalid wMaxPacketSize 0
[   58.273067][ T5469] netdevsim netdevsim7 netdevsim0: set [1, 0] type 2 family 0 port 6081 - 0
[   58.280069][ T5503] usb 2-1: config 0 interface 0 altsetting 0 has 1 endpoint descriptor, different from the interface descriptor's value: 253
[   58.288264][ T5469] netdevsim netdevsim7 netdevsim1: set [1, 0] type 2 family 0 port 6081 - 0
[   58.301511][ T5503] usb 2-1: New USB device found, idVendor=056a, idProduct=0093, bcdDevice= 0.40
[   58.310007][ T5469] netdevsim netdevsim7 netdevsim2: set [1, 0] type 2 family 0 port 6081 - 0
[   58.310039][ T5469] netdevsim netdevsim7 netdevsim3: set [1, 0] type 2 family 0 port 6081 - 0
[   58.320106][ T5503] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[   58.329484][ T5602] Bluetooth: hci1: command 0x0419 tx timeout
[   58.337625][    T5] usb 1-1: too many endpoints for config 0 interface 0 altsetting 0: 253, using maximum allowed: 30
[   58.345857][ T5602] Bluetooth: hci6: command 0x0419 tx timeout
[   58.353043][ T5481] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   58.361987][ T5602] Bluetooth: hci3: command 0x0419 tx timeout
[   58.367684][ T5481] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   58.378761][ T5602] Bluetooth: hci4: command 0x0419 tx timeout
[   58.384720][    T5] usb 1-1: config 0 interface 0 altsetting 0 endpoint 0x81 has an invalid bInterval 0, changing to 7
[   58.394339][ T5602] Bluetooth: hci2: command 0x0419 tx timeout
[   58.409705][ T5503] usb 2-1: config 0 descriptor??
[   58.412073][ T5602] Bluetooth: hci5: command 0x0419 tx timeout
[   58.425773][ T5481] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   58.434029][ T5602] Bluetooth: hci7: command 0x0419 tx timeout
[   58.445161][ T5481] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   58.450792][    T5] usb 1-1: config 0 interface 0 altsetting 0 endpoint 0x81 has invalid wMaxPacketSize 0
[   58.455281][ T5481] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   58.466185][ T3654] usb 5-1: too many endpoints for config 0 interface 0 altsetting 0: 253, using maximum allowed: 30
[   58.475953][ T5481] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   58.497351][ T5481] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   58.505463][    T5] usb 1-1: config 0 interface 0 altsetting 0 has 1 endpoint descriptor, different from the interface descriptor's value: 253
[   58.508465][ T5481] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   58.529342][ T3654] usb 5-1: config 0 interface 0 altsetting 0 endpoint 0x81 has an invalid bInterval 0, changing to 7
[   58.531566][ T5481] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   58.550835][    T5] usb 1-1: New USB device found, idVendor=056a, idProduct=0093, bcdDevice= 0.40
[   58.554086][ T5481] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   58.562169][ T3654] usb 5-1: config 0 interface 0 altsetting 0 endpoint 0x81 has invalid wMaxPacketSize 0
[   58.573255][ T5481] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   58.587006][    T5] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[   58.597811][ T5481] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   58.605724][ T3654] usb 5-1: config 0 interface 0 altsetting 0 has 1 endpoint descriptor, different from the interface descriptor's value: 253
[   58.616172][ T5481] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   58.639630][    T5] usb 1-1: config 0 descriptor??
[   58.639794][ T5481] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   58.649745][ T3654] usb 5-1: New USB device found, idVendor=056a, idProduct=0093, bcdDevice= 0.40
[   58.657724][ T5481] batman_adv: batadv0: Interface activated: batadv_slave_1
[   58.664415][ T3654] usb 5-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[   58.691614][   T17] IPv6: ADDRCONF(NETDEV_CHANGE): batadv_slave_1: link becomes ready
[   58.700305][ T3654] usb 5-1: config 0 descriptor??
[   58.701495][   T17] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_batadv: link becomes ready
[   58.715429][   T17] IPv6: ADDRCONF(NETDEV_CHANGE): batadv_slave_1: link becomes ready
[   58.725005][   T17] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_batadv: link becomes ready
[   58.737779][ T5481] netdevsim netdevsim2 netdevsim0: set [1, 0] type 2 family 0 port 6081 - 0
[   58.747357][ T5481] netdevsim netdevsim2 netdevsim1: set [1, 0] type 2 family 0 port 6081 - 0
[   58.756327][ T5481] netdevsim netdevsim2 netdevsim2: set [1, 0] type 2 family 0 port 6081 - 0
[   58.765346][ T5481] netdevsim netdevsim2 netdevsim3: set [1, 0] type 2 family 0 port 6081 - 0
[   58.802648][  T229] wlan0: Created IBSS using preconfigured BSSID 50:50:50:50:50:50
[   58.811172][   T41] wlan0: Created IBSS using preconfigured BSSID 50:50:50:50:50:50
[   58.822184][  T229] wlan0: Creating new IBSS network, BSSID 50:50:50:50:50:50
[   58.825232][   T41] wlan0: Creating new IBSS network, BSSID 50:50:50:50:50:50
[   58.846308][ T5543] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   58.854348][ T5543] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   58.890234][ T5503] wacom 0003:056A:0093.0003: item fetching failed at offset 0/1
[   58.897958][ T5503] wacom 0003:056A:0093.0003: parse failed
[   58.903436][  T229] wlan0: Created IBSS using preconfigured BSSID 50:50:50:50:50:50
[   58.903980][   T41] wlan1: Created IBSS using preconfigured BSSID 50:50:50:50:50:50
[   58.921120][ T5503] wacom: probe of 0003:056A:0093.0003 failed with error -22
[   58.921528][  T229] wlan0: Creating new IBSS network, BSSID 50:50:50:50:50:50
[   58.928567][   T41] wlan1: Creating new IBSS network, BSSID 50:50:50:50:50:50
[   58.949344][ T5583] wlan1: Created IBSS using preconfigured BSSID 50:50:50:50:50:50
[   58.957467][   T22] wlan0: Created IBSS using preconfigured BSSID 50:50:50:50:50:50
[   58.975004][   T22] wlan0: Creating new IBSS network, BSSID 50:50:50:50:50:50
[   58.982642][ T5583] wlan1: Creating new IBSS network, BSSID 50:50:50:50:50:50
[   58.990530][ T5571] usb 6-1: new high-speed USB device number 3 using dummy_hcd
[   58.992991][ T5540] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   58.998269][  T452] wlan1: Created IBSS using preconfigured BSSID 50:50:50:50:50:50
[   59.015062][  T452] wlan1: Creating new IBSS network, BSSID 50:50:50:50:50:50
[   59.019069][    T8] wlan1: Created IBSS using preconfigured BSSID 50:50:50:50:50:50
[   59.030725][    T8] wlan1: Creating new IBSS network, BSSID 50:50:50:50:50:50
[   59.031641][ T5540] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
[   59.046076][ T5540] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
[   59.054540][ T5540] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   59.062865][ T5540] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
[   59.071128][ T5540] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
[   59.091087][ T5540] usb 2-1: USB disconnect, device number 2
[   59.100117][    T5] wacom 0003:056A:0093.0004: item fetching failed at offset 0/1
[   59.127129][    T5] wacom 0003:056A:0093.0004: parse failed
[   59.136466][    T5] wacom: probe of 0003:056A:0093.0004 failed with error -22
[   59.190424][ T3654] wacom 0003:056A:0093.0005: item fetching failed at offset 0/1
[   59.198161][ T3654] wacom 0003:056A:0093.0005: parse failed
[   59.204409][ T3654] wacom: probe of 0003:056A:0093.0005 failed with error -22
[   59.300132][ T5540] usb 1-1: USB disconnect, device number 3
[   59.390025][   T34] usb 5-1: USB disconnect, device number 2
[   59.399524][ T5571] usb 6-1: too many endpoints for config 0 interface 0 altsetting 0: 253, using maximum allowed: 30
[   59.410356][ T5571] usb 6-1: config 0 interface 0 altsetting 0 endpoint 0x81 has an invalid bInterval 0, changing to 7
[   59.419389][ T5543] usb 3-1: new high-speed USB device number 2 using dummy_hcd
[   59.421945][ T5571] usb 6-1: config 0 interface 0 altsetting 0 endpoint 0x81 has invalid wMaxPacketSize 0
[   59.439091][ T5571] usb 6-1: config 0 interface 0 altsetting 0 has 1 endpoint descriptor, different from the interface descriptor's value: 253
[   59.450552][   T17] usb 4-1: new high-speed USB device number 2 using dummy_hcd
[   59.452284][    T5] usb 7-1: new high-speed USB device number 2 using dummy_hcd
[   59.461123][ T5602] usb 8-1: new high-speed USB device number 2 using dummy_hcd
[   59.467138][ T5571] usb 6-1: New USB device found, idVendor=056a, idProduct=0093, bcdDevice= 0.40
[   59.484090][ T5571] usb 6-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[   59.492690][ T5571] usb 6-1: config 0 descriptor??
[   59.789264][ T5543] usb 3-1: too many endpoints for config 0 interface 0 altsetting 0: 253, using maximum allowed: 30
[   59.800526][ T5543] usb 3-1: config 0 interface 0 altsetting 0 endpoint 0x81 has an invalid bInterval 0, changing to 7
[   59.812238][ T5543] usb 3-1: config 0 interface 0 altsetting 0 endpoint 0x81 has invalid wMaxPacketSize 0
[   59.822530][ T5543] usb 3-1: config 0 interface 0 altsetting 0 has 1 endpoint descriptor, different from the interface descriptor's value: 253
[   59.836046][ T5543] usb 3-1: New USB device found, idVendor=056a, idProduct=0093, bcdDevice= 0.40
[   59.846432][ T5602] usb 8-1: too many endpoints for config 0 interface 0 altsetting 0: 253, using maximum allowed: 30
[   59.858467][   T17] usb 4-1: too many endpoints for config 0 interface 0 altsetting 0: 253, using maximum allowed: 30
[   59.861392][    T5] usb 7-1: too many endpoints for config 0 interface 0 altsetting 0: 253, using maximum allowed: 30
[   59.870807][   T17] usb 4-1: config 0 interface 0 altsetting 0 endpoint 0x81 has an invalid bInterval 0, changing to 7
[   59.887905][    T5] usb 7-1: config 0 interface 0 altsetting 0 endpoint 0x81 has an invalid bInterval 0, changing to 7
[   59.891245][   T34] usb 2-1: new high-speed USB device number 3 using dummy_hcd
[   59.902816][    T5] usb 7-1: config 0 interface 0 altsetting 0 endpoint 0x81 has invalid wMaxPacketSize 0
[   59.910909][ T5602] usb 8-1: config 0 interface 0 altsetting 0 endpoint 0x81 has an invalid bInterval 0, changing to 7
[   59.932504][ T5543] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[   59.940894][   T17] usb 4-1: config 0 interface 0 altsetting 0 endpoint 0x81 has invalid wMaxPacketSize 0
[   59.944187][    T5] usb 7-1: config 0 interface 0 altsetting 0 has 1 endpoint descriptor, different from the interface descriptor's value: 253
[   59.951010][ T5543] usb 3-1: config 0 descriptor??
[   59.968971][ T5602] usb 8-1: config 0 interface 0 altsetting 0 endpoint 0x81 has invalid wMaxPacketSize 0
[   59.977999][    T5] usb 7-1: New USB device found, idVendor=056a, idProduct=0093, bcdDevice= 0.40
[   59.989701][ T5571] wacom 0003:056A:0093.0006: item fetching failed at offset 0/1
[   59.994543][   T17] usb 4-1: config 0 interface 0 altsetting 0 has 1 endpoint descriptor, different from the interface descriptor's value: 253
[   59.997473][ T5571] wacom 0003:056A:0093.0006: parse failed
[   60.012981][ T5602] usb 8-1: config 0 interface 0 altsetting 0 has 1 endpoint descriptor, different from the interface descriptor's value: 253
[   60.018115][    T5] usb 7-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[   60.030520][   T17] usb 4-1: New USB device found, idVendor=056a, idProduct=0093, bcdDevice= 0.40
[   60.038890][ T5571] wacom: probe of 0003:056A:0093.0006 failed with error -22
[   60.046777][ T5602] usb 8-1: New USB device found, idVendor=056a, idProduct=0093, bcdDevice= 0.40
[   60.054930][    T5] usb 7-1: config 0 descriptor??
[   60.067229][   T17] usb 4-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[   60.075912][ T5602] usb 8-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[   60.096684][   T17] usb 4-1: config 0 descriptor??
[   60.104475][ T5602] usb 8-1: config 0 descriptor??
[   60.190508][ T5571] usb 6-1: USB disconnect, device number 3
[   60.309242][   T34] usb 2-1: too many endpoints for config 0 interface 0 altsetting 0: 253, using maximum allowed: 30
[   60.320355][   T34] usb 2-1: config 0 interface 0 altsetting 0 endpoint 0x81 has an invalid bInterval 0, changing to 7
[   60.331868][   T34] usb 2-1: config 0 interface 0 altsetting 0 endpoint 0x81 has invalid wMaxPacketSize 0
[   60.341955][   T34] usb 2-1: config 0 interface 0 altsetting 0 has 1 endpoint descriptor, different from the interface descriptor's value: 253
[   60.355081][   T34] usb 2-1: New USB device found, idVendor=056a, idProduct=0093, bcdDevice= 0.40
[   60.364399][ T5635] usb 1-1: new high-speed USB device number 4 using dummy_hcd
[   60.371948][ T5540] usb 5-1: new high-speed USB device number 3 using dummy_hcd
[   60.379546][   T34] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[   60.388710][   T34] usb 2-1: config 0 descriptor??
[   60.469886][ T5543] wacom 0003:056A:0093.0007: item fetching failed at offset 0/1
[   60.477898][ T5543] wacom 0003:056A:0093.0007: parse failed
[   60.483878][ T5543] wacom: probe of 0003:056A:0093.0007 failed with error -22
[   60.540003][    T5] wacom 0003:056A:0093.0008: item fetching failed at offset 0/1
[   60.548405][    T5] wacom 0003:056A:0093.0008: parse failed
[   60.554398][    T5] wacom: probe of 0003:056A:0093.0008 failed with error -22
[   60.560311][   T17] wacom 0003:056A:0093.0009: item fetching failed at offset 0/1
[   60.570937][ T5602] wacom 0003:056A:0093.000A: item fetching failed at offset 0/1
[   60.578624][ T5602] wacom 0003:056A:0093.000A: parse failed
[   60.585205][   T17] wacom 0003:056A:0093.0009: parse failed
[   60.591060][ T5602] wacom: probe of 0003:056A:0093.000A failed with error -22
[   60.609082][   T17] wacom: probe of 0003:056A:0093.0009 failed with error -22
[   60.669730][ T5571] usb 3-1: USB disconnect, device number 2
[   60.739765][   T17] usb 7-1: USB disconnect, device number 2
[   60.751690][ T5635] usb 1-1: too many endpoints for config 0 interface 0 altsetting 0: 253, using maximum allowed: 30
[   60.762790][ T5540] usb 5-1: too many endpoints for config 0 interface 0 altsetting 0: 253, using maximum allowed: 30
[   60.763705][ T5570] usb 4-1: USB disconnect, device number 2
[   60.774618][ T5540] usb 5-1: config 0 interface 0 altsetting 0 endpoint 0x81 has an invalid bInterval 0, changing to 7
[   60.782049][ T3654] usb 8-1: USB disconnect, device number 2
[   60.794356][ T5635] usb 1-1: config 0 interface 0 altsetting 0 endpoint 0x81 has an invalid bInterval 0, changing to 7
[   60.812989][ T5635] usb 1-1: config 0 interface 0 altsetting 0 endpoint 0x81 has invalid wMaxPacketSize 0
[   60.823056][ T5540] usb 5-1: config 0 interface 0 altsetting 0 endpoint 0x81 has invalid wMaxPacketSize 0
[   60.833111][ T5635] usb 1-1: config 0 interface 0 altsetting 0 has 1 endpoint descriptor, different from the interface descriptor's value: 253
[   60.846527][ T5540] usb 5-1: config 0 interface 0 altsetting 0 has 1 endpoint descriptor, different from the interface descriptor's value: 253
[   60.860456][   T34] wacom 0003:056A:0093.000B: item fetching failed at offset 0/1
[   60.868269][ T5635] usb 1-1: New USB device found, idVendor=056a, idProduct=0093, bcdDevice= 0.40
[   60.877870][   T34] wacom 0003:056A:0093.000B: parse failed
[   60.884216][ T5540] usb 5-1: New USB device found, idVendor=056a, idProduct=0093, bcdDevice= 0.40
[   60.893655][   T34] wacom: probe of 0003:056A:0093.000B failed with error -22
[   60.901088][ T5635] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[   60.909089][ T5540] usb 5-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[   60.919751][ T5635] usb 1-1: config 0 descriptor??
[   60.925055][ T5540] usb 5-1: config 0 descriptor??
[   61.009197][    T5] usb 6-1: new high-speed USB device number 4 using dummy_hcd
[   61.060109][   T34] usb 2-1: USB disconnect, device number 3
[   61.399238][    T5] usb 6-1: too many endpoints for config 0 interface 0 altsetting 0: 253, using maximum allowed: 30
[   61.409944][ T5635] wacom 0003:056A:0093.000C: item fetching failed at offset 0/1
[   61.410340][    T5] usb 6-1: config 0 interface 0 altsetting 0 endpoint 0x81 has an invalid bInterval 0, changing to 7
[   61.418463][ T5635] wacom 0003:056A:0093.000C: parse failed
[   61.429474][    T5] usb 6-1: config 0 interface 0 altsetting 0 endpoint 0x81 has invalid wMaxPacketSize 0
[   61.436010][ T5540] wacom 0003:056A:0093.000D: item fetching failed at offset 0/1
[   61.445314][    T5] usb 6-1: config 0 interface 0 altsetting 0 has 1 endpoint descriptor, different from the interface descriptor's value: 253
[   61.453978][ T5540] wacom 0003:056A:0093.000D: parse failed
[   61.466792][    T5] usb 6-1: New USB device found, idVendor=056a, idProduct=0093, bcdDevice= 0.40
[   61.472230][ T5602] usb 3-1: new high-speed USB device number 3 using dummy_hcd
[   61.481966][    T5] usb 6-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[   61.490785][ T5635] wacom: probe of 0003:056A:0093.000C failed with error -22
[   61.499909][    T5] usb 6-1: config 0 descriptor??
[   61.510105][ T5540] wacom: probe of 0003:056A:0093.000D failed with error -22
[   61.559198][ T3654] usb 7-1: new high-speed USB device number 3 using dummy_hcd
[   61.610339][ T5570] usb 1-1: USB disconnect, device number 4
[   61.653664][ T5540] usb 5-1: USB disconnect, device number 3
[   61.869261][ T5602] usb 3-1: too many endpoints for config 0 interface 0 altsetting 0: 253, using maximum allowed: 30
[   61.880290][ T5602] usb 3-1: config 0 interface 0 altsetting 0 endpoint 0x81 has an invalid bInterval 0, changing to 7
[   61.891364][ T5602] usb 3-1: config 0 interface 0 altsetting 0 endpoint 0x81 has invalid wMaxPacketSize 0
[   61.901398][ T5602] usb 3-1: config 0 interface 0 altsetting 0 has 1 endpoint descriptor, different from the interface descriptor's value: 253
[   61.914367][ T5602] usb 3-1: New USB device found, idVendor=056a, idProduct=0093, bcdDevice= 0.40
[   61.923509][ T5602] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[   61.932635][ T5602] usb 3-1: config 0 descriptor??
[   61.939616][ T3654] usb 7-1: too many endpoints for config 0 interface 0 altsetting 0: 253, using maximum allowed: 30
[   61.950469][ T3654] usb 7-1: config 0 interface 0 altsetting 0 endpoint 0x81 has an invalid bInterval 0, changing to 7
[   61.961795][ T3654] usb 7-1: config 0 interface 0 altsetting 0 endpoint 0x81 has invalid wMaxPacketSize 0
[   61.972030][ T3654] usb 7-1: config 0 interface 0 altsetting 0 has 1 endpoint descriptor, different from the interface descriptor's value: 253
[   61.985831][    T5] wacom 0003:056A:0093.000E: item fetching failed at offset 0/1
[   61.993671][ T3654] usb 7-1: New USB device found, idVendor=056a, idProduct=0093, bcdDevice= 0.40
[   62.002882][    T5] wacom 0003:056A:0093.000E: parse failed
[   62.008652][    T5] wacom: probe of 0003:056A:0093.000E failed with error -22
[   62.016591][ T3654] usb 7-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[   62.025721][ T3654] usb 7-1: config 0 descriptor??
[   62.185596][    T5] usb 6-1: USB disconnect, device number 4
[   62.410172][ T5602] wacom 0003:056A:0093.000F: item fetching failed at offset 0/1
[   62.417879][ T5602] wacom 0003:056A:0093.000F: parse failed
[   62.424081][ T5602] wacom: probe of 0003:056A:0093.000F failed with error -22
[   62.500225][ T3654] wacom 0003:056A:0093.0010: item fetching failed at offset 0/1
[   62.508109][ T3654] wacom 0003:056A:0093.0010: parse failed
[   62.514606][ T3654] wacom: probe of 0003:056A:0093.0010 failed with error -22
[   62.609934][ T5602] usb 3-1: USB disconnect, device number 3
2024/04/16 18:19:49 executed programs: 20
[   62.700176][   T34] usb 7-1: USB disconnect, device number 3
[   64.994200][ T5650] kmemleak: 1 new suspected memory leaks (see /sys/kernel/debug/kmemleak)
[   69.684055][ T5650] kmemleak: 11 new suspected memory leaks (see /sys/kernel/debug/kmemleak)
[   70.090493][ T3304] ieee802154 phy0 wpan0: encryption failed: -22
[   70.096886][ T3304] ieee802154 phy1 wpan1: encryption failed: -22
BUG: memory leak
unreferenced object 0xffff88811ee97400 (size 512):
  comm "kworker/1:4", pid 5543, jiffies 4294942931 (age 15.510s)
  hex dump (first 32 bytes):
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  backtrace:
    [<00000000dc58b8cc>] __kfifo_alloc+0x85/0xe0
    [<00000000d5f8918f>] wacom_probe+0x1a1/0x3b0
    [<000000000d4eb0c8>] hid_device_probe+0x168/0x210
    [<00000000026baab1>] really_probe+0x154/0x470
    [<00000000f09046f6>] driver_probe_device+0x85/0x100
    [<0000000011352c66>] __device_attach_driver+0xeb/0x130
    [<00000000bb3f2134>] bus_for_each_drv+0xb1/0xf0
    [<0000000002502d26>] __device_attach+0xed/0x240
    [<000000006600abe2>] bus_probe_device+0xc6/0xe0
    [<00000000509f1cca>] device_add+0x551/0xc50
    [<0000000091477f35>] hid_add_device+0x14c/0x390
    [<000000001fe64d1c>] usbhid_probe+0x4c8/0x620
    [<00000000c73357ca>] usb_probe_interface+0x167/0x350
    [<00000000026baab1>] really_probe+0x154/0x470
    [<00000000f09046f6>] driver_probe_device+0x85/0x100
    [<0000000011352c66>] __device_attach_driver+0xeb/0x130

BUG: memory leak
unreferenced object 0xffff8881207bf800 (size 512):
  comm "kworker/0:3", pid 5503, jiffies 4294943136 (age 13.470s)
  hex dump (first 32 bytes):
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  backtrace:
    [<00000000dc58b8cc>] __kfifo_alloc+0x85/0xe0
    [<00000000d5f8918f>] wacom_probe+0x1a1/0x3b0
    [<000000000d4eb0c8>] hid_device_probe+0x168/0x210
    [<00000000026baab1>] really_probe+0x154/0x470
    [<00000000f09046f6>] driver_probe_device+0x85/0x100
    [<0000000011352c66>] __device_attach_driver+0xeb/0x130
    [<00000000bb3f2134>] bus_for_each_drv+0xb1/0xf0
    [<0000000002502d26>] __device_attach+0xed/0x240
    [<000000006600abe2>] bus_probe_device+0xc6/0xe0
    [<00000000509f1cca>] device_add+0x551/0xc50
    [<0000000091477f35>] hid_add_device+0x14c/0x390
    [<000000001fe64d1c>] usbhid_probe+0x4c8/0x620
    [<00000000c73357ca>] usb_probe_interface+0x167/0x350
    [<00000000026baab1>] really_probe+0x154/0x470
    [<00000000f09046f6>] driver_probe_device+0x85/0x100
    [<0000000011352c66>] __device_attach_driver+0xeb/0x130

BUG: memory leak
unreferenced object 0xffff8881210b6a00 (size 512):
  comm "kworker/0:0", pid 5, jiffies 4294943157 (age 13.260s)
  hex dump (first 32 bytes):
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  backtrace:
    [<00000000dc58b8cc>] __kfifo_alloc+0x85/0xe0
    [<00000000d5f8918f>] wacom_probe+0x1a1/0x3b0
    [<000000000d4eb0c8>] hid_device_probe+0x168/0x210
    [<00000000026baab1>] really_probe+0x154/0x470
    [<00000000f09046f6>] driver_probe_device+0x85/0x100
    [<0000000011352c66>] __device_attach_driver+0xeb/0x130
    [<00000000bb3f2134>] bus_for_each_drv+0xb1/0xf0
    [<0000000002502d26>] __device_attach+0xed/0x240
    [<000000006600abe2>] bus_probe_device+0xc6/0xe0
    [<00000000509f1cca>] device_add+0x551/0xc50
    [<0000000091477f35>] hid_add_device+0x14c/0x390
    [<000000001fe64d1c>] usbhid_probe+0x4c8/0x620
    [<00000000c73357ca>] usb_probe_interface+0x167/0x350
    [<00000000026baab1>] really_probe+0x154/0x470
    [<00000000f09046f6>] driver_probe_device+0x85/0x100
    [<0000000011352c66>] __device_attach_driver+0xeb/0x130

