Warning: Permanently added '10.128.0.57' (ED25519) to the list of known hosts.
2024/04/16 18:08:42 ignoring optional flag "sandboxArg"="0"
2024/04/16 18:08:42 parsed 1 programs
2024/04/16 18:08:51 executed programs: 0
syzkaller login: [   51.237180][ T5423] Adding 124996k swap on ./swap-file.  Priority:0 extents:1 across:124996k FS
[   51.552048][ T5444] chnl_net:caif_netlink_parms(): no params data found
[   51.581512][ T5438] chnl_net:caif_netlink_parms(): no params data found
[   51.616429][ T5469] chnl_net:caif_netlink_parms(): no params data found
[   51.648372][ T5444] bridge0: port 1(bridge_slave_0) entered blocking state
[   51.655849][ T5444] bridge0: port 1(bridge_slave_0) entered disabled state
[   51.663312][ T5444] device bridge_slave_0 entered promiscuous mode
[   51.673068][ T5437] chnl_net:caif_netlink_parms(): no params data found
[   51.681151][ T5460] chnl_net:caif_netlink_parms(): no params data found
[   51.693376][ T5455] chnl_net:caif_netlink_parms(): no params data found
[   51.703444][ T5444] bridge0: port 2(bridge_slave_1) entered blocking state
[   51.710508][ T5444] bridge0: port 2(bridge_slave_1) entered disabled state
[   51.718112][ T5444] device bridge_slave_1 entered promiscuous mode
[   51.728330][ T5438] bridge0: port 1(bridge_slave_0) entered blocking state
[   51.735533][ T5438] bridge0: port 1(bridge_slave_0) entered disabled state
[   51.743032][ T5438] device bridge_slave_0 entered promiscuous mode
[   51.750727][ T5438] bridge0: port 2(bridge_slave_1) entered blocking state
[   51.757868][ T5438] bridge0: port 2(bridge_slave_1) entered disabled state
[   51.765253][ T5438] device bridge_slave_1 entered promiscuous mode
[   51.775316][ T5443] chnl_net:caif_netlink_parms(): no params data found
[   51.784249][ T5442] chnl_net:caif_netlink_parms(): no params data found
[   51.793583][ T5469] bridge0: port 1(bridge_slave_0) entered blocking state
[   51.800626][ T5469] bridge0: port 1(bridge_slave_0) entered disabled state
[   51.808100][ T5469] device bridge_slave_0 entered promiscuous mode
[   51.825060][ T5438] bond0: (slave bond_slave_0): Enslaving as an active interface with an up link
[   51.836295][ T5438] bond0: (slave bond_slave_1): Enslaving as an active interface with an up link
[   51.852346][ T5469] bridge0: port 2(bridge_slave_1) entered blocking state
[   51.859486][ T5469] bridge0: port 2(bridge_slave_1) entered disabled state
[   51.867585][ T5469] device bridge_slave_1 entered promiscuous mode
[   51.874881][ T5444] bond0: (slave bond_slave_0): Enslaving as an active interface with an up link
[   51.895064][ T5438] team0: Port device team_slave_0 added
[   51.902299][ T5438] team0: Port device team_slave_1 added
[   51.912820][ T5444] bond0: (slave bond_slave_1): Enslaving as an active interface with an up link
[   51.927685][ T5437] bridge0: port 1(bridge_slave_0) entered blocking state
[   51.935177][ T5437] bridge0: port 1(bridge_slave_0) entered disabled state
[   51.943189][ T5437] device bridge_slave_0 entered promiscuous mode
[   51.951366][ T5437] bridge0: port 2(bridge_slave_1) entered blocking state
[   51.958841][ T5437] bridge0: port 2(bridge_slave_1) entered disabled state
[   51.966351][ T5437] device bridge_slave_1 entered promiscuous mode
[   51.979579][ T5469] bond0: (slave bond_slave_0): Enslaving as an active interface with an up link
[   52.003625][ T5455] bridge0: port 1(bridge_slave_0) entered blocking state
[   52.010979][ T5455] bridge0: port 1(bridge_slave_0) entered disabled state
[   52.018534][ T5455] device bridge_slave_0 entered promiscuous mode
[   52.025318][ T5442] bridge0: port 1(bridge_slave_0) entered blocking state
[   52.032765][ T5442] bridge0: port 1(bridge_slave_0) entered disabled state
[   52.040073][ T5442] device bridge_slave_0 entered promiscuous mode
[   52.046857][ T5438] batman_adv: batadv0: Adding interface: batadv_slave_0
[   52.053841][ T5438] batman_adv: batadv0: The MTU of interface batadv_slave_0 is too small (1500) to handle the transport of batman-adv packets. Packets going over this interface will be fragmented on layer2 which could impact the performance. Setting the MTU to 1560 would solve the problem.
[   52.079927][ T5438] batman_adv: batadv0: Not using interface batadv_slave_0 (retrying later): interface not active
[   52.091377][ T5469] bond0: (slave bond_slave_1): Enslaving as an active interface with an up link
[   52.100886][ T5444] team0: Port device team_slave_0 added
[   52.106773][ T5460] bridge0: port 1(bridge_slave_0) entered blocking state
[   52.113853][ T5460] bridge0: port 1(bridge_slave_0) entered disabled state
[   52.121228][ T5460] device bridge_slave_0 entered promiscuous mode
[   52.129732][ T5460] bridge0: port 2(bridge_slave_1) entered blocking state
[   52.136921][ T5460] bridge0: port 2(bridge_slave_1) entered disabled state
[   52.145183][ T5460] device bridge_slave_1 entered promiscuous mode
[   52.152323][ T5437] bond0: (slave bond_slave_0): Enslaving as an active interface with an up link
[   52.161503][ T5455] bridge0: port 2(bridge_slave_1) entered blocking state
[   52.168687][ T5455] bridge0: port 2(bridge_slave_1) entered disabled state
[   52.176670][ T5455] device bridge_slave_1 entered promiscuous mode
[   52.183204][ T5442] bridge0: port 2(bridge_slave_1) entered blocking state
[   52.190301][ T5442] bridge0: port 2(bridge_slave_1) entered disabled state
[   52.197778][ T5442] device bridge_slave_1 entered promiscuous mode
[   52.205316][ T5438] batman_adv: batadv0: Adding interface: batadv_slave_1
[   52.212371][ T5438] batman_adv: batadv0: The MTU of interface batadv_slave_1 is too small (1500) to handle the transport of batman-adv packets. Packets going over this interface will be fragmented on layer2 which could impact the performance. Setting the MTU to 1560 would solve the problem.
[   52.238696][ T5438] batman_adv: batadv0: Not using interface batadv_slave_1 (retrying later): interface not active
[   52.252344][ T5444] team0: Port device team_slave_1 added
[   52.261032][ T5443] bridge0: port 1(bridge_slave_0) entered blocking state
[   52.268290][ T5443] bridge0: port 1(bridge_slave_0) entered disabled state
[   52.276025][ T5443] device bridge_slave_0 entered promiscuous mode
[   52.283261][ T5437] bond0: (slave bond_slave_1): Enslaving as an active interface with an up link
[   52.300927][ T5455] bond0: (slave bond_slave_0): Enslaving as an active interface with an up link
[   52.311190][ T5455] bond0: (slave bond_slave_1): Enslaving as an active interface with an up link
[   52.325136][ T5444] batman_adv: batadv0: Adding interface: batadv_slave_0
[   52.332414][ T5444] batman_adv: batadv0: The MTU of interface batadv_slave_0 is too small (1500) to handle the transport of batman-adv packets. Packets going over this interface will be fragmented on layer2 which could impact the performance. Setting the MTU to 1560 would solve the problem.
[   52.358467][ T5444] batman_adv: batadv0: Not using interface batadv_slave_0 (retrying later): interface not active
[   52.369210][ T5443] bridge0: port 2(bridge_slave_1) entered blocking state
[   52.376558][ T5443] bridge0: port 2(bridge_slave_1) entered disabled state
[   52.384135][ T5443] device bridge_slave_1 entered promiscuous mode
[   52.393877][ T5437] team0: Port device team_slave_0 added
[   52.399774][ T5469] team0: Port device team_slave_0 added
[   52.407864][ T5442] bond0: (slave bond_slave_0): Enslaving as an active interface with an up link
[   52.422723][ T5460] bond0: (slave bond_slave_0): Enslaving as an active interface with an up link
[   52.432206][ T5444] batman_adv: batadv0: Adding interface: batadv_slave_1
[   52.439232][ T5444] batman_adv: batadv0: The MTU of interface batadv_slave_1 is too small (1500) to handle the transport of batman-adv packets. Packets going over this interface will be fragmented on layer2 which could impact the performance. Setting the MTU to 1560 would solve the problem.
[   52.465381][ T5444] batman_adv: batadv0: Not using interface batadv_slave_1 (retrying later): interface not active
[   52.479350][ T5437] team0: Port device team_slave_1 added
[   52.485517][ T5469] team0: Port device team_slave_1 added
[   52.491746][ T5442] bond0: (slave bond_slave_1): Enslaving as an active interface with an up link
[   52.502896][ T5455] team0: Port device team_slave_0 added
[   52.509262][ T5438] device hsr_slave_0 entered promiscuous mode
[   52.515643][ T5438] device hsr_slave_1 entered promiscuous mode
[   52.522302][ T5460] bond0: (slave bond_slave_1): Enslaving as an active interface with an up link
[   52.532061][ T5443] bond0: (slave bond_slave_0): Enslaving as an active interface with an up link
[   52.542406][ T5443] bond0: (slave bond_slave_1): Enslaving as an active interface with an up link
[   52.555825][ T5437] batman_adv: batadv0: Adding interface: batadv_slave_0
[   52.563000][ T5437] batman_adv: batadv0: The MTU of interface batadv_slave_0 is too small (1500) to handle the transport of batman-adv packets. Packets going over this interface will be fragmented on layer2 which could impact the performance. Setting the MTU to 1560 would solve the problem.
[   52.589784][ T5437] batman_adv: batadv0: Not using interface batadv_slave_0 (retrying later): interface not active
[   52.603714][ T5455] team0: Port device team_slave_1 added
[   52.618959][ T5444] device hsr_slave_0 entered promiscuous mode
[   52.625452][ T5444] device hsr_slave_1 entered promiscuous mode
[   52.632461][ T5444] debugfs: Directory 'hsr0' with parent 'hsr' already present!
[   52.640022][ T5444] Cannot create hsr debugfs directory
[   52.650097][ T5443] team0: Port device team_slave_0 added
[   52.658215][ T5437] batman_adv: batadv0: Adding interface: batadv_slave_1
[   52.665285][ T5437] batman_adv: batadv0: The MTU of interface batadv_slave_1 is too small (1500) to handle the transport of batman-adv packets. Packets going over this interface will be fragmented on layer2 which could impact the performance. Setting the MTU to 1560 would solve the problem.
[   52.691834][ T5437] batman_adv: batadv0: Not using interface batadv_slave_1 (retrying later): interface not active
[   52.703034][ T5442] team0: Port device team_slave_0 added
[   52.720710][ T5460] team0: Port device team_slave_0 added
[   52.730438][ T5460] team0: Port device team_slave_1 added
[   52.736657][ T5469] batman_adv: batadv0: Adding interface: batadv_slave_0
[   52.743626][ T5469] batman_adv: batadv0: The MTU of interface batadv_slave_0 is too small (1500) to handle the transport of batman-adv packets. Packets going over this interface will be fragmented on layer2 which could impact the performance. Setting the MTU to 1560 would solve the problem.
[   52.769664][ T5469] batman_adv: batadv0: Not using interface batadv_slave_0 (retrying later): interface not active
[   52.780804][ T5443] team0: Port device team_slave_1 added
[   52.789570][ T5442] team0: Port device team_slave_1 added
[   52.795518][ T5455] batman_adv: batadv0: Adding interface: batadv_slave_0
[   52.802500][ T5455] batman_adv: batadv0: The MTU of interface batadv_slave_0 is too small (1500) to handle the transport of batman-adv packets. Packets going over this interface will be fragmented on layer2 which could impact the performance. Setting the MTU to 1560 would solve the problem.
[   52.828614][ T5455] batman_adv: batadv0: Not using interface batadv_slave_0 (retrying later): interface not active
[   52.845857][ T5460] batman_adv: batadv0: Adding interface: batadv_slave_0
[   52.852917][ T5460] batman_adv: batadv0: The MTU of interface batadv_slave_0 is too small (1500) to handle the transport of batman-adv packets. Packets going over this interface will be fragmented on layer2 which could impact the performance. Setting the MTU to 1560 would solve the problem.
[   52.879804][ T5460] batman_adv: batadv0: Not using interface batadv_slave_0 (retrying later): interface not active
[   52.890898][ T5469] batman_adv: batadv0: Adding interface: batadv_slave_1
[   52.898227][ T5469] batman_adv: batadv0: The MTU of interface batadv_slave_1 is too small (1500) to handle the transport of batman-adv packets. Packets going over this interface will be fragmented on layer2 which could impact the performance. Setting the MTU to 1560 would solve the problem.
[   52.924847][ T5469] batman_adv: batadv0: Not using interface batadv_slave_1 (retrying later): interface not active
[   52.939522][ T5437] device hsr_slave_0 entered promiscuous mode
[   52.946007][ T5437] device hsr_slave_1 entered promiscuous mode
[   52.952390][ T5437] debugfs: Directory 'hsr0' with parent 'hsr' already present!
[   52.960069][ T5437] Cannot create hsr debugfs directory
[   52.970266][ T5455] batman_adv: batadv0: Adding interface: batadv_slave_1
[   52.977531][ T5455] batman_adv: batadv0: The MTU of interface batadv_slave_1 is too small (1500) to handle the transport of batman-adv packets. Packets going over this interface will be fragmented on layer2 which could impact the performance. Setting the MTU to 1560 would solve the problem.
[   53.003922][ T5455] batman_adv: batadv0: Not using interface batadv_slave_1 (retrying later): interface not active
[   53.018818][ T5460] batman_adv: batadv0: Adding interface: batadv_slave_1
[   53.025963][ T5460] batman_adv: batadv0: The MTU of interface batadv_slave_1 is too small (1500) to handle the transport of batman-adv packets. Packets going over this interface will be fragmented on layer2 which could impact the performance. Setting the MTU to 1560 would solve the problem.
[   53.052146][ T5460] batman_adv: batadv0: Not using interface batadv_slave_1 (retrying later): interface not active
[   53.066838][ T5442] batman_adv: batadv0: Adding interface: batadv_slave_0
[   53.074032][ T5442] batman_adv: batadv0: The MTU of interface batadv_slave_0 is too small (1500) to handle the transport of batman-adv packets. Packets going over this interface will be fragmented on layer2 which could impact the performance. Setting the MTU to 1560 would solve the problem.
[   53.100641][ T5442] batman_adv: batadv0: Not using interface batadv_slave_0 (retrying later): interface not active
[   53.111806][ T5443] batman_adv: batadv0: Adding interface: batadv_slave_0
[   53.118740][ T5443] batman_adv: batadv0: The MTU of interface batadv_slave_0 is too small (1500) to handle the transport of batman-adv packets. Packets going over this interface will be fragmented on layer2 which could impact the performance. Setting the MTU to 1560 would solve the problem.
[   53.146023][ T5443] batman_adv: batadv0: Not using interface batadv_slave_0 (retrying later): interface not active
[   53.159537][ T5443] batman_adv: batadv0: Adding interface: batadv_slave_1
[   53.166950][ T5443] batman_adv: batadv0: The MTU of interface batadv_slave_1 is too small (1500) to handle the transport of batman-adv packets. Packets going over this interface will be fragmented on layer2 which could impact the performance. Setting the MTU to 1560 would solve the problem.
[   53.193066][ T5443] batman_adv: batadv0: Not using interface batadv_slave_1 (retrying later): interface not active
[   53.220088][ T5469] device hsr_slave_0 entered promiscuous mode
[   53.226532][ T5469] device hsr_slave_1 entered promiscuous mode
[   53.233050][ T5469] debugfs: Directory 'hsr0' with parent 'hsr' already present!
[   53.240585][ T5469] Cannot create hsr debugfs directory
[   53.246454][ T5442] batman_adv: batadv0: Adding interface: batadv_slave_1
[   53.253979][ T5442] batman_adv: batadv0: The MTU of interface batadv_slave_1 is too small (1500) to handle the transport of batman-adv packets. Packets going over this interface will be fragmented on layer2 which could impact the performance. Setting the MTU to 1560 would solve the problem.
[   53.280101][ T5442] batman_adv: batadv0: Not using interface batadv_slave_1 (retrying later): interface not active
[   53.309183][ T5443] device hsr_slave_0 entered promiscuous mode
[   53.315651][ T5443] device hsr_slave_1 entered promiscuous mode
[   53.321930][ T5443] debugfs: Directory 'hsr0' with parent 'hsr' already present!
[   53.329480][ T5443] Cannot create hsr debugfs directory
[   53.337817][ T5460] device hsr_slave_0 entered promiscuous mode
[   53.344563][ T5460] device hsr_slave_1 entered promiscuous mode
[   53.350883][ T5460] debugfs: Directory 'hsr0' with parent 'hsr' already present!
[   53.358773][ T5460] Cannot create hsr debugfs directory
[   53.373848][ T5455] device hsr_slave_0 entered promiscuous mode
[   53.380123][ T5455] device hsr_slave_1 entered promiscuous mode
[   53.386385][ T5455] debugfs: Directory 'hsr0' with parent 'hsr' already present!
[   53.393974][ T5455] Cannot create hsr debugfs directory
[   53.416139][ T5442] device hsr_slave_0 entered promiscuous mode
[   53.422574][ T5442] device hsr_slave_1 entered promiscuous mode
[   53.428751][ T5442] debugfs: Directory 'hsr0' with parent 'hsr' already present!
[   53.436561][ T5442] Cannot create hsr debugfs directory
[   53.441325][ T5162] Bluetooth: hci6: command 0x0409 tx timeout
[   53.442052][    T7] Bluetooth: hci3: command 0x0409 tx timeout
[   53.447988][ T5162] Bluetooth: hci5: command 0x0409 tx timeout
[   53.461093][ T5162] Bluetooth: hci2: command 0x0409 tx timeout
[   53.465178][    T7] Bluetooth: hci0: command 0x0409 tx timeout
[   53.481361][ T5162] Bluetooth: hci1: command 0x0409 tx timeout
[   53.487382][ T5162] Bluetooth: hci4: command 0x0409 tx timeout
[   53.492154][ T5438] netdevsim netdevsim6 netdevsim0: renamed from eth0
[   53.501096][ T5438] netdevsim netdevsim6 netdevsim1: renamed from eth1
[   53.521402][    T7] Bluetooth: hci7: command 0x0409 tx timeout
[   53.527716][ T5438] netdevsim netdevsim6 netdevsim2: renamed from eth2
[   53.551928][ T5438] netdevsim netdevsim6 netdevsim3: renamed from eth3
[   53.577598][ T5444] netdevsim netdevsim7 netdevsim0: renamed from eth0
[   53.592021][ T5444] netdevsim netdevsim7 netdevsim1: renamed from eth1
[   53.602785][ T5437] netdevsim netdevsim1 netdevsim0: renamed from eth0
[   53.622416][ T5469] netdevsim netdevsim5 netdevsim0: renamed from eth0
[   53.631813][ T5444] netdevsim netdevsim7 netdevsim2: renamed from eth2
[   53.639593][ T5437] netdevsim netdevsim1 netdevsim1: renamed from eth1
[   53.648892][ T5437] netdevsim netdevsim1 netdevsim2: renamed from eth2
[   53.656464][ T5469] netdevsim netdevsim5 netdevsim1: renamed from eth1
[   53.665485][ T5444] netdevsim netdevsim7 netdevsim3: renamed from eth3
[   53.674931][ T5443] netdevsim netdevsim4 netdevsim0: renamed from eth0
[   53.682876][ T5437] netdevsim netdevsim1 netdevsim3: renamed from eth3
[   53.690746][ T5469] netdevsim netdevsim5 netdevsim2: renamed from eth2
[   53.699007][ T5469] netdevsim netdevsim5 netdevsim3: renamed from eth3
[   53.707991][ T5443] netdevsim netdevsim4 netdevsim1: renamed from eth1
[   53.719940][ T5438] 8021q: adding VLAN 0 to HW filter on device bond0
[   53.734438][ T5443] netdevsim netdevsim4 netdevsim2: renamed from eth2
[   53.742644][ T5443] netdevsim netdevsim4 netdevsim3: renamed from eth3
[   53.754738][ T5438] 8021q: adding VLAN 0 to HW filter on device team0
[   53.776287][ T5523] IPv6: ADDRCONF(NETDEV_CHANGE): veth1: link becomes ready
[   53.783837][ T5523] IPv6: ADDRCONF(NETDEV_CHANGE): veth0: link becomes ready
[   53.791329][ T5523] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_bridge: link becomes ready
[   53.799772][ T5523] IPv6: ADDRCONF(NETDEV_CHANGE): bridge_slave_0: link becomes ready
[   53.808474][ T5523] bridge0: port 1(bridge_slave_0) entered blocking state
[   53.815637][ T5523] bridge0: port 1(bridge_slave_0) entered forwarding state
[   53.823353][ T5523] IPv6: ADDRCONF(NETDEV_CHANGE): bridge0: link becomes ready
[   53.832521][ T5460] netdevsim netdevsim2 netdevsim0: renamed from eth0
[   53.848937][ T5460] netdevsim netdevsim2 netdevsim1: renamed from eth1
[   53.856598][ T5523] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_bridge: link becomes ready
[   53.865317][ T5523] IPv6: ADDRCONF(NETDEV_CHANGE): bridge_slave_1: link becomes ready
[   53.873842][ T5523] bridge0: port 2(bridge_slave_1) entered blocking state
[   53.881021][ T5523] bridge0: port 2(bridge_slave_1) entered forwarding state
[   53.888629][ T5523] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_bond: link becomes ready
[   53.903321][ T5460] netdevsim netdevsim2 netdevsim2: renamed from eth2
[   53.911584][ T5442] netdevsim netdevsim3 netdevsim0: renamed from eth0
[   53.919326][ T5455] netdevsim netdevsim0 netdevsim0: renamed from eth0
[   53.934667][ T5460] netdevsim netdevsim2 netdevsim3: renamed from eth3
[   53.943714][ T5442] netdevsim netdevsim3 netdevsim1: renamed from eth1
[   53.952207][ T5442] netdevsim netdevsim3 netdevsim2: renamed from eth2
[   53.960139][ T5525] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_bond: link becomes ready
[   53.972112][ T5444] 8021q: adding VLAN 0 to HW filter on device bond0
[   53.979154][ T5455] netdevsim netdevsim0 netdevsim1: renamed from eth1
[   53.987328][ T5455] netdevsim netdevsim0 netdevsim2: renamed from eth2
[   54.002112][ T5455] netdevsim netdevsim0 netdevsim3: renamed from eth3
[   54.010336][ T5442] netdevsim netdevsim3 netdevsim3: renamed from eth3
[   54.022082][ T5523] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_team: link becomes ready
[   54.030321][ T5523] IPv6: ADDRCONF(NETDEV_CHANGE): team_slave_0: link becomes ready
[   54.038843][ T5523] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_team: link becomes ready
[   54.047357][ T5523] IPv6: ADDRCONF(NETDEV_CHANGE): team_slave_1: link becomes ready
[   54.055538][ T5523] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_hsr: link becomes ready
[   54.063639][ T5523] IPv6: ADDRCONF(NETDEV_CHANGE): hsr_slave_0: link becomes ready
[   54.071824][ T5523] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_hsr: link becomes ready
[   54.079924][ T5523] IPv6: ADDRCONF(NETDEV_CHANGE): hsr_slave_1: link becomes ready
[   54.088164][ T5523] IPv6: ADDRCONF(NETDEV_CHANGE): veth1: link becomes ready
[   54.096056][ T5523] IPv6: ADDRCONF(NETDEV_CHANGE): veth0: link becomes ready
[   54.103560][ T5523] IPv6: ADDRCONF(NETDEV_CHANGE): team0: link becomes ready
[   54.122713][ T5438] IPv6: ADDRCONF(NETDEV_CHANGE): hsr0: link becomes ready
[   54.139651][ T5437] 8021q: adding VLAN 0 to HW filter on device bond0
[   54.147913][ T5444] 8021q: adding VLAN 0 to HW filter on device team0
[   54.166335][ T5469] 8021q: adding VLAN 0 to HW filter on device bond0
[   54.177209][ T5478] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_bridge: link becomes ready
[   54.185645][ T5478] IPv6: ADDRCONF(NETDEV_CHANGE): bridge_slave_0: link becomes ready
[   54.193995][ T5478] bridge0: port 1(bridge_slave_0) entered blocking state
[   54.201011][ T5478] bridge0: port 1(bridge_slave_0) entered forwarding state
[   54.208822][ T5478] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_bridge: link becomes ready
[   54.217301][ T5478] IPv6: ADDRCONF(NETDEV_CHANGE): bridge_slave_1: link becomes ready
[   54.225560][ T5478] bridge0: port 2(bridge_slave_1) entered blocking state
[   54.232586][ T5478] bridge0: port 2(bridge_slave_1) entered forwarding state
[   54.240018][ T5478] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_bond: link becomes ready
[   54.248396][ T5478] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_bond: link becomes ready
[   54.256968][ T5478] IPv6: ADDRCONF(NETDEV_CHANGE): veth1: link becomes ready
[   54.264666][ T5478] IPv6: ADDRCONF(NETDEV_CHANGE): veth0: link becomes ready
[   54.272470][ T5478] IPv6: ADDRCONF(NETDEV_CHANGE): bridge0: link becomes ready
[   54.288423][ T5444] hsr0: Slave A (hsr_slave_0) is not up; please bring it up to get a fully working HSR network
[   54.299068][ T5444] hsr0: Slave B (hsr_slave_1) is not up; please bring it up to get a fully working HSR network
[   54.313478][ T5437] 8021q: adding VLAN 0 to HW filter on device team0
[   54.324866][ T5469] 8021q: adding VLAN 0 to HW filter on device team0
[   54.336058][ T5519] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_team: link becomes ready
[   54.344511][ T5519] IPv6: ADDRCONF(NETDEV_CHANGE): team_slave_0: link becomes ready
[   54.353097][ T5519] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_team: link becomes ready
[   54.361903][ T5519] IPv6: ADDRCONF(NETDEV_CHANGE): team_slave_1: link becomes ready
[   54.370467][ T5519] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_hsr: link becomes ready
[   54.379452][ T5519] IPv6: ADDRCONF(NETDEV_CHANGE): hsr_slave_0: link becomes ready
[   54.387902][ T5519] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_hsr: link becomes ready
[   54.396135][ T5519] IPv6: ADDRCONF(NETDEV_CHANGE): hsr_slave_1: link becomes ready
[   54.404506][ T5519] IPv6: ADDRCONF(NETDEV_CHANGE): veth1: link becomes ready
[   54.412017][ T5519] IPv6: ADDRCONF(NETDEV_CHANGE): veth0: link becomes ready
[   54.420081][ T5519] IPv6: ADDRCONF(NETDEV_CHANGE): team0: link becomes ready
[   54.428803][ T5519] IPv6: ADDRCONF(NETDEV_CHANGE): hsr0: link becomes ready
[   54.441821][ T5523] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_bridge: link becomes ready
[   54.450675][ T5523] IPv6: ADDRCONF(NETDEV_CHANGE): bridge_slave_0: link becomes ready
[   54.459123][ T5523] bridge0: port 1(bridge_slave_0) entered blocking state
[   54.466193][ T5523] bridge0: port 1(bridge_slave_0) entered forwarding state
[   54.474180][ T5523] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_bridge: link becomes ready
[   54.482693][ T5523] IPv6: ADDRCONF(NETDEV_CHANGE): bridge_slave_1: link becomes ready
[   54.490933][ T5523] bridge0: port 2(bridge_slave_1) entered blocking state
[   54.497976][ T5523] bridge0: port 2(bridge_slave_1) entered forwarding state
[   54.506358][ T5523] IPv6: ADDRCONF(NETDEV_CHANGE): bridge0: link becomes ready
[   54.529580][ T5460] 8021q: adding VLAN 0 to HW filter on device bond0
[   54.542636][ T5443] 8021q: adding VLAN 0 to HW filter on device bond0
[   54.554215][ T5437] hsr0: Slave A (hsr_slave_0) is not up; please bring it up to get a fully working HSR network
[   54.565295][ T5437] hsr0: Slave B (hsr_slave_1) is not up; please bring it up to get a fully working HSR network
[   54.576419][ T5522] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_bond: link becomes ready
[   54.585084][ T5522] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_bond: link becomes ready
[   54.593561][ T5522] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_team: link becomes ready
[   54.601908][ T5522] IPv6: ADDRCONF(NETDEV_CHANGE): team_slave_0: link becomes ready
[   54.610108][ T5522] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_team: link becomes ready
[   54.619022][ T5522] IPv6: ADDRCONF(NETDEV_CHANGE): team_slave_1: link becomes ready
[   54.627243][ T5522] IPv6: ADDRCONF(NETDEV_CHANGE): vxcan1: link becomes ready
[   54.634710][ T5522] IPv6: ADDRCONF(NETDEV_CHANGE): vxcan0: link becomes ready
[   54.642111][ T5522] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_bridge: link becomes ready
[   54.650565][ T5522] IPv6: ADDRCONF(NETDEV_CHANGE): bridge_slave_0: link becomes ready
[   54.659075][ T5522] bridge0: port 1(bridge_slave_0) entered blocking state
[   54.666315][ T5522] bridge0: port 1(bridge_slave_0) entered forwarding state
[   54.675978][ T5522] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_hsr: link becomes ready
[   54.684273][ T5522] IPv6: ADDRCONF(NETDEV_CHANGE): hsr_slave_0: link becomes ready
[   54.692736][ T5522] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_hsr: link becomes ready
[   54.700838][ T5522] IPv6: ADDRCONF(NETDEV_CHANGE): hsr_slave_1: link becomes ready
[   54.724310][ T5442] 8021q: adding VLAN 0 to HW filter on device bond0
[   54.740356][ T5522] IPv6: ADDRCONF(NETDEV_CHANGE): team0: link becomes ready
[   54.748413][ T5522] IPv6: ADDRCONF(NETDEV_CHANGE): bridge0: link becomes ready
[   54.757121][ T5522] IPv6: ADDRCONF(NETDEV_CHANGE): hsr0: link becomes ready
[   54.764802][ T5522] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_bridge: link becomes ready
[   54.773577][ T5522] IPv6: ADDRCONF(NETDEV_CHANGE): bridge_slave_1: link becomes ready
[   54.782106][ T5522] bridge0: port 2(bridge_slave_1) entered blocking state
[   54.789411][ T5522] bridge0: port 2(bridge_slave_1) entered forwarding state
[   54.796995][ T5522] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_bond: link becomes ready
[   54.808363][ T5469] hsr0: Slave A (hsr_slave_0) is not up; please bring it up to get a fully working HSR network
[   54.818874][ T5469] hsr0: Slave B (hsr_slave_1) is not up; please bring it up to get a fully working HSR network
[   54.831110][ T5438] 8021q: adding VLAN 0 to HW filter on device batadv0
[   54.840281][ T5443] 8021q: adding VLAN 0 to HW filter on device team0
[   54.851838][ T5444] 8021q: adding VLAN 0 to HW filter on device batadv0
[   54.861185][ T5455] 8021q: adding VLAN 0 to HW filter on device bond0
[   54.870755][ T5460] 8021q: adding VLAN 0 to HW filter on device team0
[   54.879455][ T5523] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_bond: link becomes ready
[   54.888870][ T5523] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_team: link becomes ready
[   54.897759][ T5523] IPv6: ADDRCONF(NETDEV_CHANGE): team_slave_0: link becomes ready
[   54.906165][ T5523] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_team: link becomes ready
[   54.914599][ T5523] IPv6: ADDRCONF(NETDEV_CHANGE): team_slave_1: link becomes ready
[   54.922848][ T5523] IPv6: ADDRCONF(NETDEV_CHANGE): hsr_slave_0: link becomes ready
[   54.931157][ T5523] IPv6: ADDRCONF(NETDEV_CHANGE): hsr_slave_1: link becomes ready
[   54.939561][ T5523] IPv6: ADDRCONF(NETDEV_CHANGE): vxcan1: link becomes ready
[   54.947063][ T5523] IPv6: ADDRCONF(NETDEV_CHANGE): vxcan0: link becomes ready
[   54.954876][ T5523] IPv6: ADDRCONF(NETDEV_CHANGE): veth1: link becomes ready
[   54.962621][ T5523] IPv6: ADDRCONF(NETDEV_CHANGE): veth0: link becomes ready
[   54.970042][ T5523] IPv6: ADDRCONF(NETDEV_CHANGE): veth1: link becomes ready
[   54.977697][ T5523] IPv6: ADDRCONF(NETDEV_CHANGE): veth0: link becomes ready
[   54.985550][ T5523] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_bridge: link becomes ready
[   54.993935][ T5523] IPv6: ADDRCONF(NETDEV_CHANGE): bridge_slave_0: link becomes ready
[   55.002348][ T5523] bridge0: port 1(bridge_slave_0) entered blocking state
[   55.009356][ T5523] bridge0: port 1(bridge_slave_0) entered forwarding state
[   55.016968][ T5523] IPv6: ADDRCONF(NETDEV_CHANGE): veth1: link becomes ready
[   55.024551][ T5523] IPv6: ADDRCONF(NETDEV_CHANGE): veth0: link becomes ready
[   55.032548][ T5442] 8021q: adding VLAN 0 to HW filter on device team0
[   55.040085][ T5523] IPv6: ADDRCONF(NETDEV_CHANGE): team0: link becomes ready
[   55.047922][ T5523] IPv6: ADDRCONF(NETDEV_CHANGE): hsr0: link becomes ready
[   55.055505][ T5523] IPv6: ADDRCONF(NETDEV_CHANGE): bridge0: link becomes ready
[   55.067900][ T5455] 8021q: adding VLAN 0 to HW filter on device team0
[   55.096451][ T5443] hsr0: Slave A (hsr_slave_0) is not up; please bring it up to get a fully working HSR network
[   55.107301][ T5443] hsr0: Slave B (hsr_slave_1) is not up; please bring it up to get a fully working HSR network
[   55.118844][ T5522] IPv6: ADDRCONF(NETDEV_CHANGE): veth1: link becomes ready
[   55.127185][ T5522] IPv6: ADDRCONF(NETDEV_CHANGE): veth0: link becomes ready
[   55.135081][ T5522] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_bridge: link becomes ready
[   55.143913][ T5522] IPv6: ADDRCONF(NETDEV_CHANGE): bridge_slave_0: link becomes ready
[   55.152378][ T5522] bridge0: port 1(bridge_slave_0) entered blocking state
[   55.159549][ T5522] bridge0: port 1(bridge_slave_0) entered forwarding state
[   55.167666][ T5522] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_bridge: link becomes ready
[   55.176482][ T5522] IPv6: ADDRCONF(NETDEV_CHANGE): bridge_slave_1: link becomes ready
[   55.184914][ T5522] bridge0: port 2(bridge_slave_1) entered blocking state
[   55.191968][ T5522] bridge0: port 2(bridge_slave_1) entered forwarding state
[   55.199636][ T5522] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_bridge: link becomes ready
[   55.208459][ T5522] IPv6: ADDRCONF(NETDEV_CHANGE): bridge_slave_1: link becomes ready
[   55.217193][ T5522] bridge0: port 2(bridge_slave_1) entered blocking state
[   55.224227][ T5522] bridge0: port 2(bridge_slave_1) entered forwarding state
[   55.231856][ T5522] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_bridge: link becomes ready
[   55.240422][ T5522] IPv6: ADDRCONF(NETDEV_CHANGE): bridge_slave_0: link becomes ready
[   55.249108][ T5522] bridge0: port 1(bridge_slave_0) entered blocking state
[   55.256259][ T5522] bridge0: port 1(bridge_slave_0) entered forwarding state
[   55.263748][ T5522] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_bond: link becomes ready
[   55.272254][ T5522] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_bridge: link becomes ready
[   55.280897][ T5522] IPv6: ADDRCONF(NETDEV_CHANGE): bridge_slave_1: link becomes ready
[   55.289313][ T5522] bridge0: port 2(bridge_slave_1) entered blocking state
[   55.296503][ T5522] bridge0: port 2(bridge_slave_1) entered forwarding state
[   55.304023][ T5522] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_bond: link becomes ready
[   55.312437][ T5522] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_bond: link becomes ready
[   55.320886][ T5522] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_team: link becomes ready
[   55.329168][ T5522] IPv6: ADDRCONF(NETDEV_CHANGE): team_slave_0: link becomes ready
[   55.337336][ T5522] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_bond: link becomes ready
[   55.345684][ T5522] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_team: link becomes ready
[   55.354083][ T5522] IPv6: ADDRCONF(NETDEV_CHANGE): team_slave_1: link becomes ready
[   55.362328][ T5522] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_team: link becomes ready
[   55.370870][ T5522] IPv6: ADDRCONF(NETDEV_CHANGE): team_slave_0: link becomes ready
[   55.379421][ T5522] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_hsr: link becomes ready
[   55.387786][ T5522] IPv6: ADDRCONF(NETDEV_CHANGE): hsr_slave_0: link becomes ready
[   55.395969][ T5522] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_team: link becomes ready
[   55.404361][ T5522] IPv6: ADDRCONF(NETDEV_CHANGE): team_slave_1: link becomes ready
[   55.412665][ T5522] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_hsr: link becomes ready
[   55.420818][ T5522] IPv6: ADDRCONF(NETDEV_CHANGE): hsr_slave_1: link becomes ready
[   55.428993][ T5522] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_hsr: link becomes ready
[   55.437198][ T5522] IPv6: ADDRCONF(NETDEV_CHANGE): hsr_slave_0: link becomes ready
[   55.453701][ T5460] hsr0: Slave A (hsr_slave_0) is not up; please bring it up to get a fully working HSR network
[   55.464408][ T5460] hsr0: Slave B (hsr_slave_1) is not up; please bring it up to get a fully working HSR network
[   55.490376][ T5442] hsr0: Slave B (hsr_slave_1) is not up; please bring it up to get a fully working HSR network
[   55.501624][ T5442] IPv6: ADDRCONF(NETDEV_CHANGE): hsr0: link becomes ready
[   55.514668][ T5522] IPv6: ADDRCONF(NETDEV_CHANGE): bridge0: link becomes ready
[   55.522792][ T5522] IPv6: ADDRCONF(NETDEV_CHANGE): bridge0: link becomes ready
[   55.530765][ T5522] IPv6: ADDRCONF(NETDEV_CHANGE): team0: link becomes ready
[   55.531340][ T5527] Bluetooth: hci1: command 0x041b tx timeout
[   55.539082][ T5522] IPv6: ADDRCONF(NETDEV_CHANGE): team0: link becomes ready
[   55.547027][ T5527] Bluetooth: hci2: command 0x041b tx timeout
[   55.551960][ T5522] IPv6: ADDRCONF(NETDEV_CHANGE): hsr0: link becomes ready
[   55.557716][ T5527] Bluetooth: hci0: command 0x041b tx timeout
[   55.565100][ T5522] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_bond: link becomes ready
[   55.571491][ T5527] Bluetooth: hci3: command 0x041b tx timeout
[   55.579253][ T5522] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_bond: link becomes ready
[   55.585436][ T5527] Bluetooth: hci5: command 0x041b tx timeout
[   55.593389][ T5522] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_team: link becomes ready
[   55.599270][ T5527] Bluetooth: hci6: command 0x041b tx timeout
[   55.607382][ T5522] IPv6: ADDRCONF(NETDEV_CHANGE): team_slave_0: link becomes ready
[   55.621775][ T5522] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_team: link becomes ready
[   55.630121][ T5522] IPv6: ADDRCONF(NETDEV_CHANGE): team_slave_1: link becomes ready
[   55.638349][ T5522] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_hsr: link becomes ready
[   55.646931][ T5522] IPv6: ADDRCONF(NETDEV_CHANGE): hsr_slave_0: link becomes ready
[   55.655093][ T5522] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_hsr: link becomes ready
[   55.663179][ T5522] IPv6: ADDRCONF(NETDEV_CHANGE): hsr_slave_1: link becomes ready
[   55.671229][ T5522] IPv6: ADDRCONF(NETDEV_CHANGE): vxcan1: link becomes ready
[   55.678903][ T5522] IPv6: ADDRCONF(NETDEV_CHANGE): vxcan0: link becomes ready
[   55.686496][ T5522] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_bridge: link becomes ready
[   55.694910][ T5522] IPv6: ADDRCONF(NETDEV_CHANGE): bridge_slave_0: link becomes ready
[   55.703152][ T5522] bridge0: port 1(bridge_slave_0) entered blocking state
[   55.710297][ T5522] bridge0: port 1(bridge_slave_0) entered forwarding state
[   55.717859][ T5522] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_bridge: link becomes ready
[   55.726561][ T5522] IPv6: ADDRCONF(NETDEV_CHANGE): bridge_slave_1: link becomes ready
[   55.734787][ T5522] bridge0: port 2(bridge_slave_1) entered blocking state
[   55.741839][ T5522] bridge0: port 2(bridge_slave_1) entered forwarding state
[   55.749589][ T5522] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_bond: link becomes ready
[   55.758208][ T5522] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_bond: link becomes ready
[   55.766778][ T5522] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_team: link becomes ready
[   55.775180][ T5522] IPv6: ADDRCONF(NETDEV_CHANGE): team_slave_0: link becomes ready
[   55.783380][ T5522] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_team: link becomes ready
[   55.792080][ T5522] IPv6: ADDRCONF(NETDEV_CHANGE): team_slave_1: link becomes ready
[   55.800414][ T5522] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_virt_wifi: link becomes ready
[   55.808836][ T5522] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_virt_wifi: link becomes ready
[   55.817218][ T5522] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_vlan: link becomes ready
[   55.825199][ T5522] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_vlan: link becomes ready
[   55.833327][ T5522] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_hsr: link becomes ready
[   55.841715][ T5522] IPv6: ADDRCONF(NETDEV_CHANGE): hsr_slave_0: link becomes ready
[   55.849877][ T5522] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_hsr: link becomes ready
[   55.858288][ T5522] IPv6: ADDRCONF(NETDEV_CHANGE): hsr_slave_1: link becomes ready
[   55.866872][ T5522] Bluetooth: hci4: command 0x041b tx timeout
[   55.868407][ T5438] device veth0_vlan entered promiscuous mode
[   55.873854][ T5522] Bluetooth: hci7: command 0x041b tx timeout
[   55.885167][ T5438] device veth1_vlan entered promiscuous mode
[   55.896019][ T5455] hsr0: Slave B (hsr_slave_1) is not up; please bring it up to get a fully working HSR network
[   55.907037][ T5455] IPv6: ADDRCONF(NETDEV_CHANGE): hsr0: link becomes ready
[   55.916901][ T5437] 8021q: adding VLAN 0 to HW filter on device batadv0
[   55.924985][ T5522] IPv6: ADDRCONF(NETDEV_CHANGE): team0: link becomes ready
[   55.932990][ T5522] IPv6: ADDRCONF(NETDEV_CHANGE): hsr0: link becomes ready
[   55.940570][ T5522] IPv6: ADDRCONF(NETDEV_CHANGE): bridge0: link becomes ready
[   55.948319][ T5522] IPv6: ADDRCONF(NETDEV_CHANGE): team0: link becomes ready
[   55.956151][ T5522] IPv6: ADDRCONF(NETDEV_CHANGE): vlan0: link becomes ready
[   55.963840][ T5522] IPv6: ADDRCONF(NETDEV_CHANGE): vlan1: link becomes ready
[   55.971593][ T5522] IPv6: ADDRCONF(NETDEV_CHANGE): macvlan0: link becomes ready
[   55.979581][ T5522] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_hsr: link becomes ready
[   55.987927][ T5522] IPv6: ADDRCONF(NETDEV_CHANGE): hsr_slave_1: link becomes ready
[   55.996013][ T5522] IPv6: ADDRCONF(NETDEV_CHANGE): vxcan1: link becomes ready
[   56.003541][ T5522] IPv6: ADDRCONF(NETDEV_CHANGE): vxcan0: link becomes ready
[   56.020156][ T5438] device veth0_macvtap entered promiscuous mode
[   56.029568][ T5469] 8021q: adding VLAN 0 to HW filter on device batadv0
[   56.057864][ T5527] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_macvtap: link becomes ready
[   56.067012][ T5527] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_macvtap: link becomes ready
[   56.075751][ T5527] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_virt_wifi: link becomes ready
[   56.084318][ T5527] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_virt_wifi: link becomes ready
[   56.092928][ T5527] IPv6: ADDRCONF(NETDEV_CHANGE): vxcan1: link becomes ready
[   56.100304][ T5527] IPv6: ADDRCONF(NETDEV_CHANGE): vxcan0: link becomes ready
[   56.107830][ T5527] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_vlan: link becomes ready
[   56.115937][ T5527] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_vlan: link becomes ready
[   56.125442][ T5438] device veth1_macvtap entered promiscuous mode
[   56.137242][ T5527] IPv6: ADDRCONF(NETDEV_CHANGE): macvtap0: link becomes ready
[   56.145470][ T5527] IPv6: ADDRCONF(NETDEV_CHANGE): macsec0: link becomes ready
[   56.157105][ T5527] IPv6: ADDRCONF(NETDEV_CHANGE): vlan0: link becomes ready
[   56.165068][ T5527] IPv6: ADDRCONF(NETDEV_CHANGE): vlan1: link becomes ready
[   56.177881][ T5443] 8021q: adding VLAN 0 to HW filter on device batadv0
[   56.186286][ T5444] device veth0_vlan entered promiscuous mode
[   56.198929][ T5460] 8021q: adding VLAN 0 to HW filter on device batadv0
[   56.208045][ T5438] batman_adv: batadv0: Interface activated: batadv_slave_0
[   56.221999][ T5556] IPv6: ADDRCONF(NETDEV_CHANGE): vxcan1: link becomes ready
[   56.229468][ T5556] IPv6: ADDRCONF(NETDEV_CHANGE): vxcan0: link becomes ready
[   56.237152][ T5556] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_virt_wifi: link becomes ready
[   56.245795][ T5556] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_virt_wifi: link becomes ready
[   56.254639][ T5556] IPv6: ADDRCONF(NETDEV_CHANGE): vxcan1: link becomes ready
[   56.262317][ T5556] IPv6: ADDRCONF(NETDEV_CHANGE): vxcan0: link becomes ready
[   56.269749][ T5556] IPv6: ADDRCONF(NETDEV_CHANGE): batadv_slave_0: link becomes ready
[   56.278693][ T5556] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_batadv: link becomes ready
[   56.287289][ T5556] IPv6: ADDRCONF(NETDEV_CHANGE): vxcan1: link becomes ready
[   56.295060][ T5556] IPv6: ADDRCONF(NETDEV_CHANGE): vxcan0: link becomes ready
[   56.303204][ T5442] 8021q: adding VLAN 0 to HW filter on device batadv0
[   56.322887][ T5455] 8021q: adding VLAN 0 to HW filter on device batadv0
[   56.345640][ T5443] device veth0_vlan entered promiscuous mode
[   56.352333][ T5444] device veth1_vlan entered promiscuous mode
[   56.358947][ T5478] IPv6: ADDRCONF(NETDEV_CHANGE): macvlan0: link becomes ready
[   56.367462][ T5478] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_virt_wifi: link becomes ready
[   56.375895][ T5478] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_virt_wifi: link becomes ready
[   56.384364][ T5478] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_virt_wifi: link becomes ready
[   56.392838][ T5478] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_virt_wifi: link becomes ready
[   56.401214][ T5478] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_virt_wifi: link becomes ready
[   56.409731][ T5478] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_virt_wifi: link becomes ready
[   56.418201][ T5478] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_vlan: link becomes ready
[   56.426344][ T5478] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_vlan: link becomes ready
[   56.440326][ T5460] device veth0_vlan entered promiscuous mode
[   56.447238][ T5478] IPv6: ADDRCONF(NETDEV_CHANGE): vlan0: link becomes ready
[   56.454823][ T5478] IPv6: ADDRCONF(NETDEV_CHANGE): vlan1: link becomes ready
[   56.462749][ T5478] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_vlan: link becomes ready
[   56.470939][ T5478] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_vlan: link becomes ready
[   56.479247][ T5478] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_virt_wifi: link becomes ready
[   56.487717][ T5478] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_virt_wifi: link becomes ready
[   56.496323][ T5527] IPv6: ADDRCONF(NETDEV_CHANGE): vlan0: link becomes ready
[   56.503973][ T5527] IPv6: ADDRCONF(NETDEV_CHANGE): vlan1: link becomes ready
[   56.513191][ T5469] device veth0_vlan entered promiscuous mode
[   56.522135][ T5469] device veth1_vlan entered promiscuous mode
[   56.530635][ T5437] device veth0_vlan entered promiscuous mode
[   56.538472][ T5438] batman_adv: batadv0: Interface activated: batadv_slave_1
[   56.548977][ T5460] device veth1_vlan entered promiscuous mode
[   56.556240][ T5586] IPv6: ADDRCONF(NETDEV_CHANGE): macvlan0: link becomes ready
[   56.564322][ T5586] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_vlan: link becomes ready
[   56.572543][ T5586] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_vlan: link becomes ready
[   56.580702][ T5586] IPv6: ADDRCONF(NETDEV_CHANGE): macvlan0: link becomes ready
[   56.588761][ T5586] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_vlan: link becomes ready
[   56.597026][ T5586] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_vlan: link becomes ready
[   56.605137][ T5586] IPv6: ADDRCONF(NETDEV_CHANGE): batadv_slave_1: link becomes ready
[   56.613640][ T5586] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_batadv: link becomes ready
[   56.622639][ T5586] IPv6: ADDRCONF(NETDEV_CHANGE): vlan0: link becomes ready
[   56.630230][ T5586] IPv6: ADDRCONF(NETDEV_CHANGE): vlan1: link becomes ready
[   56.637916][ T5586] IPv6: ADDRCONF(NETDEV_CHANGE): vlan0: link becomes ready
[   56.645693][ T5586] IPv6: ADDRCONF(NETDEV_CHANGE): vlan1: link becomes ready
[   56.654748][ T5443] device veth1_vlan entered promiscuous mode
[   56.670040][ T5469] device veth0_macvtap entered promiscuous mode
[   56.680673][ T5437] device veth1_vlan entered promiscuous mode
[   56.688721][ T5438] netdevsim netdevsim6 netdevsim0: set [1, 0] type 2 family 0 port 6081 - 0
[   56.697684][ T5438] netdevsim netdevsim6 netdevsim1: set [1, 0] type 2 family 0 port 6081 - 0
[   56.706436][ T5438] netdevsim netdevsim6 netdevsim2: set [1, 0] type 2 family 0 port 6081 - 0
[   56.715223][ T5438] netdevsim netdevsim6 netdevsim3: set [1, 0] type 2 family 0 port 6081 - 0
[   56.734434][    T7] IPv6: ADDRCONF(NETDEV_CHANGE): macvlan1: link becomes ready
[   56.742266][    T7] IPv6: ADDRCONF(NETDEV_CHANGE): macvlan0: link becomes ready
[   56.750168][    T7] IPv6: ADDRCONF(NETDEV_CHANGE): macvlan1: link becomes ready
[   56.758277][    T7] IPv6: ADDRCONF(NETDEV_CHANGE): macvlan1: link becomes ready
[   56.766160][    T7] IPv6: ADDRCONF(NETDEV_CHANGE): macvlan1: link becomes ready
[   56.774167][    T7] IPv6: ADDRCONF(NETDEV_CHANGE): macvlan0: link becomes ready
[   56.782048][    T7] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_macvtap: link becomes ready
[   56.790369][    T7] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_macvtap: link becomes ready
[   56.798671][    T7] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_macvtap: link becomes ready
[   56.807016][    T7] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_macvtap: link becomes ready
[   56.815266][    T7] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_virt_wifi: link becomes ready
[   56.823643][    T7] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_virt_wifi: link becomes ready
[   56.832019][    T7] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_macvtap: link becomes ready
[   56.840165][    T7] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_macvtap: link becomes ready
[   56.854242][    T7] IPv6: ADDRCONF(NETDEV_CHANGE): macvtap0: link becomes ready
[   56.862257][    T7] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_vlan: link becomes ready
[   56.870655][    T7] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_vlan: link becomes ready
[   56.879797][    T7] IPv6: ADDRCONF(NETDEV_CHANGE): vlan0: link becomes ready
[   56.887492][    T7] IPv6: ADDRCONF(NETDEV_CHANGE): vlan1: link becomes ready
[   56.901092][ T5455] device veth0_vlan entered promiscuous mode
[   56.911821][ T5444] device veth0_macvtap entered promiscuous mode
[   56.920595][ T5444] device veth1_macvtap entered promiscuous mode
[   56.928382][ T5469] device veth1_macvtap entered promiscuous mode
[   56.939442][ T5437] device veth0_macvtap entered promiscuous mode
[   56.951396][ T5527] IPv6: ADDRCONF(NETDEV_CHANGE): macvlan1: link becomes ready
[   56.959442][ T5527] IPv6: ADDRCONF(NETDEV_CHANGE): macsec0: link becomes ready
[   56.967437][ T5527] IPv6: ADDRCONF(NETDEV_CHANGE): macvtap0: link becomes ready
[   56.975565][ T5527] IPv6: ADDRCONF(NETDEV_CHANGE): macsec0: link becomes ready
[   56.983412][ T5527] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_vlan: link becomes ready
[   56.991511][ T5527] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_vlan: link becomes ready
[   56.999520][ T5527] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_macvtap: link becomes ready
[   57.008063][ T5527] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_macvtap: link becomes ready
[   57.019338][ T5455] device veth1_vlan entered promiscuous mode
[   57.026790][    T7] IPv6: ADDRCONF(NETDEV_CHANGE): vlan0: link becomes ready
[   57.034502][    T7] IPv6: ADDRCONF(NETDEV_CHANGE): vlan1: link becomes ready
[   57.042585][    T7] IPv6: ADDRCONF(NETDEV_CHANGE): macvtap0: link becomes ready
[   57.051799][ T5460] device veth0_macvtap entered promiscuous mode
[   57.058594][ T5442] device veth0_vlan entered promiscuous mode
[   57.068991][ T5442] device veth1_vlan entered promiscuous mode
[   57.079276][ T5469] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   57.089921][ T5469] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   57.100919][ T5469] batman_adv: batadv0: Interface activated: batadv_slave_0
[   57.113589][ T5443] device veth0_macvtap entered promiscuous mode
[   57.134974][ T5460] device veth1_macvtap entered promiscuous mode
[   57.142632][ T5444] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   57.153312][ T5444] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   57.163873][ T5444] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   57.174569][ T5444] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   57.185127][ T5444] batman_adv: batadv0: Interface activated: batadv_slave_0
[   57.193144][ T5586] IPv6: ADDRCONF(NETDEV_CHANGE): batadv_slave_0: link becomes ready
[   57.201917][ T5586] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_batadv: link becomes ready
[   57.210401][ T5586] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_macvtap: link becomes ready
[   57.218814][ T5586] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_macvtap: link becomes ready
[   57.227108][ T5586] IPv6: ADDRCONF(NETDEV_CHANGE): batadv_slave_0: link becomes ready
[   57.235711][ T5586] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_batadv: link becomes ready
[   57.245257][ T5469] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   57.256164][ T5469] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   57.267877][ T5469] batman_adv: batadv0: Interface activated: batadv_slave_1
[   57.278067][ T5469] netdevsim netdevsim5 netdevsim0: set [1, 0] type 2 family 0 port 6081 - 0
[   57.287665][ T5469] netdevsim netdevsim5 netdevsim1: set [1, 0] type 2 family 0 port 6081 - 0
[   57.297220][ T5469] netdevsim netdevsim5 netdevsim2: set [1, 0] type 2 family 0 port 6081 - 0
[   57.306412][ T5469] netdevsim netdevsim5 netdevsim3: set [1, 0] type 2 family 0 port 6081 - 0
[   57.319881][ T5455] device veth0_macvtap entered promiscuous mode
[   57.328745][ T5444] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   57.339444][ T5444] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   57.349608][ T5444] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   57.360735][ T5444] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   57.372427][ T5444] batman_adv: batadv0: Interface activated: batadv_slave_1
[   57.380083][ T5437] device veth1_macvtap entered promiscuous mode
[   57.386998][ T5586] IPv6: ADDRCONF(NETDEV_CHANGE): macvtap0: link becomes ready
[   57.394891][ T5586] IPv6: ADDRCONF(NETDEV_CHANGE): batadv_slave_1: link becomes ready
[   57.403391][ T5586] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_batadv: link becomes ready
[   57.411883][ T5586] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_macvtap: link becomes ready
[   57.420043][ T5586] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_macvtap: link becomes ready
[   57.428412][ T5586] IPv6: ADDRCONF(NETDEV_CHANGE): batadv_slave_1: link becomes ready
[   57.437030][ T5586] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_batadv: link becomes ready
[   57.445876][ T5586] IPv6: ADDRCONF(NETDEV_CHANGE): macvtap0: link becomes ready
[   57.454716][ T5443] device veth1_macvtap entered promiscuous mode
[   57.462128][ T3267] wlan0: Created IBSS using preconfigured BSSID 50:50:50:50:50:50
[   57.469964][ T3267] wlan0: Creating new IBSS network, BSSID 50:50:50:50:50:50
[   57.474139][ T5460] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   57.488755][ T5460] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   57.498718][ T5460] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   57.509744][ T5460] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   57.519686][ T5460] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   57.530318][ T5460] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   57.540892][ T5460] batman_adv: batadv0: Interface activated: batadv_slave_0
[   57.550844][ T5455] device veth1_macvtap entered promiscuous mode
[   57.565078][ T5556] IPv6: ADDRCONF(NETDEV_CHANGE): macsec0: link becomes ready
[   57.573284][ T5556] IPv6: ADDRCONF(NETDEV_CHANGE): macsec0: link becomes ready
[   57.580979][ T5556] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   57.589057][ T5556] IPv6: ADDRCONF(NETDEV_CHANGE): batadv_slave_0: link becomes ready
[   57.597802][ T5556] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_batadv: link becomes ready
[   57.610261][  T135] wlan1: Created IBSS using preconfigured BSSID 50:50:50:50:50:50
[   57.615798][ T5442] device veth0_macvtap entered promiscuous mode
[   57.618924][ T5556] Bluetooth: hci3: command 0x040f tx timeout
[   57.626489][ T5460] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   57.630969][  T135] wlan1: Creating new IBSS network, BSSID 50:50:50:50:50:50
[   57.641207][ T5460] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   57.648822][ T5556] Bluetooth: hci0: command 0x040f tx timeout
[   57.658815][ T5460] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   57.665170][ T5556] Bluetooth: hci2: command 0x040f tx timeout
[   57.675070][ T5460] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   57.681428][ T5556] Bluetooth: hci1: command 0x040f tx timeout
[   57.690925][ T5524] Bluetooth: hci6: command 0x040f tx timeout
[   57.697190][ T5460] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   57.713605][ T5460] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   57.713705][   T19] Bluetooth: hci5: command 0x040f tx timeout
[   57.724581][ T5460] batman_adv: batadv0: Interface activated: batadv_slave_1
[   57.738351][ T5444] netdevsim netdevsim7 netdevsim0: set [1, 0] type 2 family 0 port 6081 - 0
[   57.747175][ T5444] netdevsim netdevsim7 netdevsim1: set [1, 0] type 2 family 0 port 6081 - 0
[   57.756029][ T5444] netdevsim netdevsim7 netdevsim2: set [1, 0] type 2 family 0 port 6081 - 0
[   57.765046][ T5444] netdevsim netdevsim7 netdevsim3: set [1, 0] type 2 family 0 port 6081 - 0
[   57.780111][ T5455] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   57.790661][ T5455] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   57.800534][ T5455] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   57.812766][ T5455] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   57.822754][ T5455] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   57.833459][ T5455] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   57.843621][ T5455] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   57.854371][ T5455] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   57.864916][ T5455] batman_adv: batadv0: Interface activated: batadv_slave_0
[   57.874560][ T5455] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   57.885233][ T5455] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   57.895151][ T5455] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   57.906294][ T5455] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   57.916175][ T5455] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   57.927201][ T5455] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   57.931441][ T5527] Bluetooth: hci7: command 0x040f tx timeout
[   57.937501][ T5455] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   57.943261][ T5527] Bluetooth: hci4: command 0x040f tx timeout
[   57.954538][ T5455] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   57.970250][ T5455] batman_adv: batadv0: Interface activated: batadv_slave_1
[   57.979717][ T5455] netdevsim netdevsim0 netdevsim0: set [1, 0] type 2 family 0 port 6081 - 0
[   57.988826][ T5455] netdevsim netdevsim0 netdevsim1: set [1, 0] type 2 family 0 port 6081 - 0
[   57.997642][ T5455] netdevsim netdevsim0 netdevsim2: set [1, 0] type 2 family 0 port 6081 - 0
[   58.006753][ T5455] netdevsim netdevsim0 netdevsim3: set [1, 0] type 2 family 0 port 6081 - 0
[   58.016837][ T5556] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
[   58.024506][ T5556] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_macvtap: link becomes ready
[   58.032766][ T5556] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_macvtap: link becomes ready
[   58.040948][ T5556] IPv6: ADDRCONF(NETDEV_CHANGE): batadv_slave_1: link becomes ready
[   58.049310][ T5556] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_batadv: link becomes ready
[   58.057747][ T5556] IPv6: ADDRCONF(NETDEV_CHANGE): batadv_slave_0: link becomes ready
[   58.066376][ T5556] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_batadv: link becomes ready
[   58.074808][ T5556] IPv6: ADDRCONF(NETDEV_CHANGE): batadv_slave_1: link becomes ready
[   58.083220][ T5556] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_batadv: link becomes ready
[   58.093126][ T5460] netdevsim netdevsim2 netdevsim0: set [1, 0] type 2 family 0 port 6081 - 0
[   58.102028][ T5460] netdevsim netdevsim2 netdevsim1: set [1, 0] type 2 family 0 port 6081 - 0
[   58.110799][ T5460] netdevsim netdevsim2 netdevsim2: set [1, 0] type 2 family 0 port 6081 - 0
[   58.119990][ T5460] netdevsim netdevsim2 netdevsim3: set [1, 0] type 2 family 0 port 6081 - 0
[   58.134605][ T5437] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   58.145296][ T5437] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   58.155971][ T5437] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   58.166923][ T5437] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   58.176776][ T5437] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   58.188004][ T5437] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   58.198100][ T5437] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   58.209067][ T5437] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   58.219774][ T5437] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   58.230985][ T5437] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   58.241916][ T5437] batman_adv: batadv0: Interface activated: batadv_slave_0
[   58.250436][ T5443] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   58.262011][ T5443] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   58.272224][ T5443] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   58.282932][ T5443] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   58.292837][ T5443] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   58.303716][ T5443] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   58.313765][ T5443] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   58.324818][ T5443] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   58.335360][ T5443] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   58.345996][ T5443] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   58.356153][ T5443] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   58.366683][ T5443] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   58.377304][ T5443] batman_adv: batadv0: Interface activated: batadv_slave_0
[   58.387335][ T5442] device veth1_macvtap entered promiscuous mode
[   58.394679][ T5556] IPv6: ADDRCONF(NETDEV_CHANGE): macvtap0: link becomes ready
[   58.403293][ T5556] IPv6: ADDRCONF(NETDEV_CHANGE): batadv_slave_0: link becomes ready
[   58.412041][ T5556] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_batadv: link becomes ready
[   58.421589][ T5556] IPv6: ADDRCONF(NETDEV_CHANGE): batadv_slave_0: link becomes ready
[   58.430564][ T5556] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_batadv: link becomes ready
[   58.450645][ T5437] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   58.463434][ T5437] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   58.473937][ T5437] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   58.484612][ T5437] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   58.494521][ T5437] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   58.505107][ T5437] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   58.515367][ T5437] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   58.526232][ T5437] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   58.536209][ T5437] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
2024/04/16 18:08:58 executed programs: 8
[   58.548833][ T5437] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   58.559781][ T5437] batman_adv: batadv0: Interface activated: batadv_slave_1
[   58.571730][ T5443] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   58.585780][ T5443] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   58.595896][ T5443] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   58.607463][ T5443] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   58.618328][ T5443] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   58.629370][ T5443] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   58.639516][ T5443] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   58.650288][ T5443] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   58.660467][ T5443] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   58.671150][ T5443] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   58.681461][ T5443] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   58.692254][ T5443] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   58.703481][ T5443] batman_adv: batadv0: Interface activated: batadv_slave_1
[   58.728138][ T5442] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   58.740486][ T5442] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   58.751039][ T5442] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   58.761710][ T5442] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   58.771855][ T5442] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   58.784190][ T5442] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   58.794267][ T5442] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   58.804781][ T5442] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   58.814851][ T5442] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   58.825546][ T5442] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   58.836067][ T5442] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   58.846779][ T5442] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   58.856883][ T5442] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   58.868178][ T5442] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   58.878874][ T5442] batman_adv: batadv0: Interface activated: batadv_slave_0
[   58.891853][ T5478] IPv6: ADDRCONF(NETDEV_CHANGE): batadv_slave_1: link becomes ready
[   58.900676][ T5478] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_batadv: link becomes ready
[   58.910499][ T5478] IPv6: ADDRCONF(NETDEV_CHANGE): batadv_slave_1: link becomes ready
[   58.919927][ T5478] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_batadv: link becomes ready
[   58.929585][ T5478] IPv6: ADDRCONF(NETDEV_CHANGE): batadv_slave_0: link becomes ready
[   58.938565][ T5478] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_batadv: link becomes ready
[   58.957409][  T478] wlan0: Created IBSS using preconfigured BSSID 50:50:50:50:50:50
[   58.968885][  T478] wlan0: Creating new IBSS network, BSSID 50:50:50:50:50:50
[   58.971989][ T5437] netdevsim netdevsim1 netdevsim0: set [1, 0] type 2 family 0 port 6081 - 0
[   58.987496][ T5437] netdevsim netdevsim1 netdevsim1: set [1, 0] type 2 family 0 port 6081 - 0
[   58.996854][ T5437] netdevsim netdevsim1 netdevsim2: set [1, 0] type 2 family 0 port 6081 - 0
[   59.006506][ T5437] netdevsim netdevsim1 netdevsim3: set [1, 0] type 2 family 0 port 6081 - 0
[   59.023912][ T5443] netdevsim netdevsim4 netdevsim0: set [1, 0] type 2 family 0 port 6081 - 0
[   59.033000][ T5443] netdevsim netdevsim4 netdevsim1: set [1, 0] type 2 family 0 port 6081 - 0
[   59.042480][ T5443] netdevsim netdevsim4 netdevsim2: set [1, 0] type 2 family 0 port 6081 - 0
[   59.051916][ T5443] netdevsim netdevsim4 netdevsim3: set [1, 0] type 2 family 0 port 6081 - 0
[   59.071387][ T5442] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   59.082284][ T5442] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   59.092793][ T5442] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   59.103628][ T5442] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   59.113583][ T5442] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   59.124418][ T5442] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   59.134663][ T5442] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   59.145365][ T5442] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   59.155413][ T5442] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   59.166157][ T5442] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   59.176069][ T5442] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   59.186608][ T5442] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   59.196955][ T5442] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   59.207741][ T5442] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   59.218552][ T5442] batman_adv: batadv0: Interface activated: batadv_slave_1
[   59.234219][ T5586] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   59.242445][ T5586] IPv6: ADDRCONF(NETDEV_CHANGE): batadv_slave_1: link becomes ready
[   59.251670][ T5586] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_batadv: link becomes ready
[   59.271588][ T3267] wlan0: Created IBSS using preconfigured BSSID 50:50:50:50:50:50
[   59.279516][ T3267] wlan0: Creating new IBSS network, BSSID 50:50:50:50:50:50
[   59.299548][ T5442] netdevsim netdevsim3 netdevsim0: set [1, 0] type 2 family 0 port 6081 - 0
[   59.308759][ T5442] netdevsim netdevsim3 netdevsim1: set [1, 0] type 2 family 0 port 6081 - 0
[   59.318061][ T5442] netdevsim netdevsim3 netdevsim2: set [1, 0] type 2 family 0 port 6081 - 0
[   59.327258][ T5442] netdevsim netdevsim3 netdevsim3: set [1, 0] type 2 family 0 port 6081 - 0
[   59.337184][ T3267] wlan0: Created IBSS using preconfigured BSSID 50:50:50:50:50:50
[   59.345538][ T3267] wlan0: Creating new IBSS network, BSSID 50:50:50:50:50:50
[   59.353883][  T478] wlan1: Created IBSS using preconfigured BSSID 50:50:50:50:50:50
[   59.354717][  T135] wlan1: Created IBSS using preconfigured BSSID 50:50:50:50:50:50
[   59.363334][  T478] wlan1: Creating new IBSS network, BSSID 50:50:50:50:50:50
[   59.373201][ T5526] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   59.377523][  T135] wlan1: Creating new IBSS network, BSSID 50:50:50:50:50:50
[   59.390390][ T5526] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   59.399570][ T5526] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
[   59.407332][ T5526] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
[   59.442611][  T478] wlan1: Created IBSS using preconfigured BSSID 50:50:50:50:50:50
[   59.450462][  T478] wlan1: Creating new IBSS network, BSSID 50:50:50:50:50:50
[   59.467726][  T135] wlan0: Created IBSS using preconfigured BSSID 50:50:50:50:50:50
[   59.475661][ T5527] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
[   59.489869][  T135] wlan0: Creating new IBSS network, BSSID 50:50:50:50:50:50
[   59.502329][ T5527] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   59.546803][  T478] wlan1: Created IBSS using preconfigured BSSID 50:50:50:50:50:50
[   59.558821][  T478] wlan1: Creating new IBSS network, BSSID 50:50:50:50:50:50
[   59.567151][ T3267] wlan0: Created IBSS using preconfigured BSSID 50:50:50:50:50:50
[   59.577303][  T135] wlan0: Created IBSS using preconfigured BSSID 50:50:50:50:50:50
[   59.591557][ T3267] wlan0: Creating new IBSS network, BSSID 50:50:50:50:50:50
[   59.599334][ T3863] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
[   59.600234][  T135] wlan0: Creating new IBSS network, BSSID 50:50:50:50:50:50
[   59.613256][ T3863] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   59.622016][ T3863] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   59.641064][ T3267] wlan1: Created IBSS using preconfigured BSSID 50:50:50:50:50:50
[   59.649518][ T3267] wlan1: Creating new IBSS network, BSSID 50:50:50:50:50:50
[   59.651753][ T3026] wlan0: Created IBSS using preconfigured BSSID 50:50:50:50:50:50
[   59.662920][ T5524] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
[   59.678581][ T3026] wlan0: Creating new IBSS network, BSSID 50:50:50:50:50:50
[   59.679164][  T135] wlan1: Created IBSS using preconfigured BSSID 50:50:50:50:50:50
[   59.686732][ T5524] Bluetooth: hci0: command 0x0419 tx timeout
[   59.713216][ T5524] Bluetooth: hci3: command 0x0419 tx timeout
[   59.720186][ T5524] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   59.727059][  T135] wlan1: Creating new IBSS network, BSSID 50:50:50:50:50:50
[   59.737045][ T3026] wlan1: Created IBSS using preconfigured BSSID 50:50:50:50:50:50
[   59.738294][ T5518] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
[   59.752527][ T3026] wlan1: Creating new IBSS network, BSSID 50:50:50:50:50:50
[   59.760144][ T5524] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
[   59.768995][ T5524] Bluetooth: hci1: command 0x0419 tx timeout
[   59.771916][ T5518] Bluetooth: hci5: command 0x0419 tx timeout
[   59.780374][ T5524] Bluetooth: hci6: command 0x0419 tx timeout
[   59.787688][ T5524] Bluetooth: hci2: command 0x0419 tx timeout
[   60.001559][ T5524] Bluetooth: hci4: command 0x0419 tx timeout
[   60.001571][ T5518] Bluetooth: hci7: command 0x0419 tx timeout
[   66.280424][ T5631] kmemleak: 22 new suspected memory leaks (see /sys/kernel/debug/kmemleak)
[   69.042412][ T5631] kmemleak: 7 new suspected memory leaks (see /sys/kernel/debug/kmemleak)
BUG: memory leak
unreferenced object 0xffff8881017fa380 (size 832):
  comm "syz-executor.6", pid 5592, jiffies 4294943124 (age 10.540s)
  hex dump (first 32 bytes):
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
    2a 00 01 40 00 00 00 00 00 00 00 00 00 00 00 00  *..@............
  backtrace:
    [<00000000b3cfb46c>] sk_prot_alloc+0x3e/0x1b0
    [<00000000d4631ec3>] sk_alloc+0x30/0x400
    [<00000000ae1013d8>] qrtr_create+0x4e/0xb0
    [<0000000057675e6c>] __sock_create+0x19b/0x2a0
    [<000000004905da1c>] __sys_socket+0x6f/0x130
    [<0000000055b748c2>] __x64_sys_socket+0x17/0x20
    [<0000000089d8b833>] do_syscall_64+0x34/0xb0
    [<00000000483fd3a3>] entry_SYSCALL_64_after_hwframe+0x44/0xae

BUG: memory leak
unreferenced object 0xffff8881148e63a0 (size 32):
  comm "syz-executor.6", pid 5592, jiffies 4294943124 (age 10.540s)
  hex dump (first 32 bytes):
    b0 e2 04 40 81 88 ff ff 00 00 00 00 00 00 00 00  ...@............
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  backtrace:
    [<000000002667ce32>] apparmor_sk_alloc_security+0x53/0xd0
    [<00000000e06ae784>] security_sk_alloc+0x43/0x80
    [<000000002903073e>] sk_prot_alloc+0xb1/0x1b0
    [<00000000d4631ec3>] sk_alloc+0x30/0x400
    [<00000000ae1013d8>] qrtr_create+0x4e/0xb0
    [<0000000057675e6c>] __sock_create+0x19b/0x2a0
    [<000000004905da1c>] __sys_socket+0x6f/0x130
    [<0000000055b748c2>] __x64_sys_socket+0x17/0x20
    [<0000000089d8b833>] do_syscall_64+0x34/0xb0
    [<00000000483fd3a3>] entry_SYSCALL_64_after_hwframe+0x44/0xae

BUG: memory leak
unreferenced object 0xffff8881017fa6c0 (size 832):
  comm "syz-executor.6", pid 5594, jiffies 4294943135 (age 10.430s)
  hex dump (first 32 bytes):
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
    2a 00 01 40 00 00 00 00 00 00 00 00 00 00 00 00  *..@............
  backtrace:
    [<00000000b3cfb46c>] sk_prot_alloc+0x3e/0x1b0
    [<00000000d4631ec3>] sk_alloc+0x30/0x400
    [<00000000ae1013d8>] qrtr_create+0x4e/0xb0
    [<0000000057675e6c>] __sock_create+0x19b/0x2a0
    [<000000004905da1c>] __sys_socket+0x6f/0x130
    [<0000000055b748c2>] __x64_sys_socket+0x17/0x20
    [<0000000089d8b833>] do_syscall_64+0x34/0xb0
    [<00000000483fd3a3>] entry_SYSCALL_64_after_hwframe+0x44/0xae

BUG: memory leak
unreferenced object 0xffff8881148e63c0 (size 32):
  comm "syz-executor.6", pid 5594, jiffies 4294943135 (age 10.430s)
  hex dump (first 32 bytes):
    b0 e2 04 40 81 88 ff ff 00 00 00 00 00 00 00 00  ...@............
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  backtrace:
    [<000000002667ce32>] apparmor_sk_alloc_security+0x53/0xd0
    [<00000000e06ae784>] security_sk_alloc+0x43/0x80
    [<000000002903073e>] sk_prot_alloc+0xb1/0x1b0
    [<00000000d4631ec3>] sk_alloc+0x30/0x400
    [<00000000ae1013d8>] qrtr_create+0x4e/0xb0
    [<0000000057675e6c>] __sock_create+0x19b/0x2a0
    [<000000004905da1c>] __sys_socket+0x6f/0x130
    [<0000000055b748c2>] __x64_sys_socket+0x17/0x20
    [<0000000089d8b833>] do_syscall_64+0x34/0xb0
    [<00000000483fd3a3>] entry_SYSCALL_64_after_hwframe+0x44/0xae

BUG: memory leak
unreferenced object 0xffff8881017faa00 (size 832):
  comm "syz-executor.6", pid 5596, jiffies 4294943140 (age 10.380s)
  hex dump (first 32 bytes):
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
    2a 00 01 40 00 00 00 00 00 00 00 00 00 00 00 00  *..@............
  backtrace:
    [<00000000b3cfb46c>] sk_prot_alloc+0x3e/0x1b0
    [<00000000d4631ec3>] sk_alloc+0x30/0x400
    [<00000000ae1013d8>] qrtr_create+0x4e/0xb0
    [<0000000057675e6c>] __sock_create+0x19b/0x2a0
    [<000000004905da1c>] __sys_socket+0x6f/0x130
    [<0000000055b748c2>] __x64_sys_socket+0x17/0x20
    [<0000000089d8b833>] do_syscall_64+0x34/0xb0
    [<00000000483fd3a3>] entry_SYSCALL_64_after_hwframe+0x44/0xae

