Warning: Permanently added '10.128.0.62' (ED25519) to the list of known hosts.
2024/04/16 17:27:23 ignoring optional flag "sandboxArg"="0"
2024/04/16 17:27:23 parsed 1 programs
2024/04/16 17:27:32 executed programs: 0
[   47.466125][ T5445] Adding 124996k swap on ./swap-file.  Priority:0 extents:1 across:124996k FS
[   47.669323][ T5467] IPVS: ftp: loaded support on port[0] = 21
[   47.671562][ T5484] IPVS: ftp: loaded support on port[0] = 21
[   47.685813][ T5490] IPVS: ftp: loaded support on port[0] = 21
[   47.694309][ T5469] IPVS: ftp: loaded support on port[0] = 21
[   47.709306][ T5465] IPVS: ftp: loaded support on port[0] = 21
[   47.720936][ T5468] IPVS: ftp: loaded support on port[0] = 21
[   47.733377][ T5475] IPVS: ftp: loaded support on port[0] = 21
[   47.742240][ T5461] IPVS: ftp: loaded support on port[0] = 21
[   47.774565][ T5467] chnl_net:caif_netlink_parms(): no params data found
[   47.795725][ T5468] chnl_net:caif_netlink_parms(): no params data found
[   47.840944][ T5484] chnl_net:caif_netlink_parms(): no params data found
[   47.864508][ T5467] bridge0: port 1(bridge_slave_0) entered blocking state
[   47.871719][ T5467] bridge0: port 1(bridge_slave_0) entered disabled state
[   47.872015][ T5467] device bridge_slave_0 entered promiscuous mode
[   47.891411][ T5490] chnl_net:caif_netlink_parms(): no params data found
[   47.909686][ T5467] bridge0: port 2(bridge_slave_1) entered blocking state
[   47.916717][ T5467] bridge0: port 2(bridge_slave_1) entered disabled state
[   47.924091][ T5467] device bridge_slave_1 entered promiscuous mode
[   47.934282][ T5468] bridge0: port 1(bridge_slave_0) entered blocking state
[   47.941401][ T5468] bridge0: port 1(bridge_slave_0) entered disabled state
[   47.948725][ T5468] device bridge_slave_0 entered promiscuous mode
[   47.959633][ T5465] chnl_net:caif_netlink_parms(): no params data found
[   47.969514][ T5467] bond0: (slave bond_slave_0): Enslaving as an active interface with an up link
[   47.980417][ T5467] bond0: (slave bond_slave_1): Enslaving as an active interface with an up link
[   47.990954][ T5468] bridge0: port 2(bridge_slave_1) entered blocking state
[   47.998038][ T5468] bridge0: port 2(bridge_slave_1) entered disabled state
[   48.005268][ T5468] device bridge_slave_1 entered promiscuous mode
[   48.019139][ T5490] bridge0: port 1(bridge_slave_0) entered blocking state
[   48.026184][ T5490] bridge0: port 1(bridge_slave_0) entered disabled state
[   48.033478][ T5490] device bridge_slave_0 entered promiscuous mode
[   48.041503][ T5490] bridge0: port 2(bridge_slave_1) entered blocking state
[   48.048633][ T5490] bridge0: port 2(bridge_slave_1) entered disabled state
[   48.055846][ T5490] device bridge_slave_1 entered promiscuous mode
[   48.064325][ T5475] chnl_net:caif_netlink_parms(): no params data found
[   48.075060][ T5468] bond0: (slave bond_slave_0): Enslaving as an active interface with an up link
[   48.085316][ T5468] bond0: (slave bond_slave_1): Enslaving as an active interface with an up link
[   48.099231][ T5467] team0: Port device team_slave_0 added
[   48.109300][ T5490] bond0: (slave bond_slave_0): Enslaving as an active interface with an up link
[   48.121123][ T5490] bond0: (slave bond_slave_1): Enslaving as an active interface with an up link
[   48.130311][ T5461] chnl_net:caif_netlink_parms(): no params data found
[   48.141254][ T5468] team0: Port device team_slave_0 added
[   48.146849][ T5484] bridge0: port 1(bridge_slave_0) entered blocking state
[   48.153985][ T5484] bridge0: port 1(bridge_slave_0) entered disabled state
[   48.161307][ T5484] device bridge_slave_0 entered promiscuous mode
[   48.168345][ T5467] team0: Port device team_slave_1 added
[   48.182003][ T5490] team0: Port device team_slave_0 added
[   48.188323][ T5490] team0: Port device team_slave_1 added
[   48.195932][ T5468] team0: Port device team_slave_1 added
[   48.201692][ T5484] bridge0: port 2(bridge_slave_1) entered blocking state
[   48.208748][ T5484] bridge0: port 2(bridge_slave_1) entered disabled state
[   48.215986][ T5484] device bridge_slave_1 entered promiscuous mode
[   48.224966][ T5467] batman_adv: batadv0: Adding interface: batadv_slave_0
[   48.231999][ T5467] batman_adv: batadv0: The MTU of interface batadv_slave_0 is too small (1500) to handle the transport of batman-adv packets. Packets going over this interface will be fragmented on layer2 which could impact the performance. Setting the MTU to 1560 would solve the problem.
[   48.258081][ T5467] batman_adv: batadv0: Not using interface batadv_slave_0 (retrying later): interface not active
[   48.269639][ T5467] batman_adv: batadv0: Adding interface: batadv_slave_1
[   48.276563][ T5467] batman_adv: batadv0: The MTU of interface batadv_slave_1 is too small (1500) to handle the transport of batman-adv packets. Packets going over this interface will be fragmented on layer2 which could impact the performance. Setting the MTU to 1560 would solve the problem.
[   48.302564][ T5467] batman_adv: batadv0: Not using interface batadv_slave_1 (retrying later): interface not active
[   48.309618][ T5490] batman_adv: batadv0: Adding interface: batadv_slave_0
[   48.320047][ T5490] batman_adv: batadv0: The MTU of interface batadv_slave_0 is too small (1500) to handle the transport of batman-adv packets. Packets going over this interface will be fragmented on layer2 which could impact the performance. Setting the MTU to 1560 would solve the problem.
[   48.346021][ T5490] batman_adv: batadv0: Not using interface batadv_slave_0 (retrying later): interface not active
[   48.363786][ T5468] batman_adv: batadv0: Adding interface: batadv_slave_0
[   48.370747][ T5468] batman_adv: batadv0: The MTU of interface batadv_slave_0 is too small (1500) to handle the transport of batman-adv packets. Packets going over this interface will be fragmented on layer2 which could impact the performance. Setting the MTU to 1560 would solve the problem.
[   48.396700][ T5468] batman_adv: batadv0: Not using interface batadv_slave_0 (retrying later): interface not active
[   48.411363][ T5484] bond0: (slave bond_slave_0): Enslaving as an active interface with an up link
[   48.422283][ T5484] bond0: (slave bond_slave_1): Enslaving as an active interface with an up link
[   48.431644][ T5490] batman_adv: batadv0: Adding interface: batadv_slave_1
[   48.438609][ T5490] batman_adv: batadv0: The MTU of interface batadv_slave_1 is too small (1500) to handle the transport of batman-adv packets. Packets going over this interface will be fragmented on layer2 which could impact the performance. Setting the MTU to 1560 would solve the problem.
[   48.464864][ T5490] batman_adv: batadv0: Not using interface batadv_slave_1 (retrying later): interface not active
[   48.478533][ T5468] batman_adv: batadv0: Adding interface: batadv_slave_1
[   48.485562][ T5468] batman_adv: batadv0: The MTU of interface batadv_slave_1 is too small (1500) to handle the transport of batman-adv packets. Packets going over this interface will be fragmented on layer2 which could impact the performance. Setting the MTU to 1560 would solve the problem.
[   48.511713][ T5468] batman_adv: batadv0: Not using interface batadv_slave_1 (retrying later): interface not active
[   48.524504][ T5469] chnl_net:caif_netlink_parms(): no params data found
[   48.534198][ T5475] bridge0: port 1(bridge_slave_0) entered blocking state
[   48.541269][ T5475] bridge0: port 1(bridge_slave_0) entered disabled state
[   48.548630][ T5475] device bridge_slave_0 entered promiscuous mode
[   48.556578][ T5475] bridge0: port 2(bridge_slave_1) entered blocking state
[   48.563662][ T5475] bridge0: port 2(bridge_slave_1) entered disabled state
[   48.570978][ T5475] device bridge_slave_1 entered promiscuous mode
[   48.584031][ T5475] bond0: (slave bond_slave_0): Enslaving as an active interface with an up link
[   48.593109][ T5465] bridge0: port 1(bridge_slave_0) entered blocking state
[   48.600158][ T5465] bridge0: port 1(bridge_slave_0) entered disabled state
[   48.607391][ T5465] device bridge_slave_0 entered promiscuous mode
[   48.614630][ T5465] bridge0: port 2(bridge_slave_1) entered blocking state
[   48.621725][ T5465] bridge0: port 2(bridge_slave_1) entered disabled state
[   48.629066][ T5465] device bridge_slave_1 entered promiscuous mode
[   48.643766][ T5467] device hsr_slave_0 entered promiscuous mode
[   48.650183][ T5467] device hsr_slave_1 entered promiscuous mode
[   48.661353][ T5484] team0: Port device team_slave_0 added
[   48.667345][ T5484] team0: Port device team_slave_1 added
[   48.675165][ T5490] device hsr_slave_0 entered promiscuous mode
[   48.681506][ T5490] device hsr_slave_1 entered promiscuous mode
[   48.687647][ T5490] debugfs: Directory 'hsr0' with parent 'hsr' already present!
[   48.695215][ T5490] Cannot create hsr debugfs directory
[   48.701248][ T5475] bond0: (slave bond_slave_1): Enslaving as an active interface with an up link
[   48.714587][ T5465] bond0: (slave bond_slave_0): Enslaving as an active interface with an up link
[   48.723925][ T5461] bridge0: port 1(bridge_slave_0) entered blocking state
[   48.731215][ T5461] bridge0: port 1(bridge_slave_0) entered disabled state
[   48.738554][ T5461] device bridge_slave_0 entered promiscuous mode
[   48.753002][ T5484] batman_adv: batadv0: Adding interface: batadv_slave_0
[   48.759985][ T5484] batman_adv: batadv0: The MTU of interface batadv_slave_0 is too small (1500) to handle the transport of batman-adv packets. Packets going over this interface will be fragmented on layer2 which could impact the performance. Setting the MTU to 1560 would solve the problem.
[   48.786197][ T5484] batman_adv: batadv0: Not using interface batadv_slave_0 (retrying later): interface not active
[   48.803745][ T5475] team0: Port device team_slave_0 added
[   48.810188][ T5468] device hsr_slave_0 entered promiscuous mode
[   48.816426][ T5468] device hsr_slave_1 entered promiscuous mode
[   48.822633][ T5468] debugfs: Directory 'hsr0' with parent 'hsr' already present!
[   48.830200][ T5468] Cannot create hsr debugfs directory
[   48.835977][ T5465] bond0: (slave bond_slave_1): Enslaving as an active interface with an up link
[   48.846387][ T5461] bridge0: port 2(bridge_slave_1) entered blocking state
[   48.853431][ T5461] bridge0: port 2(bridge_slave_1) entered disabled state
[   48.860755][ T5461] device bridge_slave_1 entered promiscuous mode
[   48.872238][ T5469] bridge0: port 1(bridge_slave_0) entered blocking state
[   48.879555][ T5469] bridge0: port 1(bridge_slave_0) entered disabled state
[   48.886792][ T5469] device bridge_slave_0 entered promiscuous mode
[   48.893576][ T5484] batman_adv: batadv0: Adding interface: batadv_slave_1
[   48.900536][ T5484] batman_adv: batadv0: The MTU of interface batadv_slave_1 is too small (1500) to handle the transport of batman-adv packets. Packets going over this interface will be fragmented on layer2 which could impact the performance. Setting the MTU to 1560 would solve the problem.
[   48.926438][ T5484] batman_adv: batadv0: Not using interface batadv_slave_1 (retrying later): interface not active
[   48.941861][ T5475] team0: Port device team_slave_1 added
[   48.953826][ T5475] batman_adv: batadv0: Adding interface: batadv_slave_0
[   48.960840][ T5475] batman_adv: batadv0: The MTU of interface batadv_slave_0 is too small (1500) to handle the transport of batman-adv packets. Packets going over this interface will be fragmented on layer2 which could impact the performance. Setting the MTU to 1560 would solve the problem.
[   48.986843][ T5475] batman_adv: batadv0: Not using interface batadv_slave_0 (retrying later): interface not active
[   48.999132][ T5475] batman_adv: batadv0: Adding interface: batadv_slave_1
[   49.006149][ T5475] batman_adv: batadv0: The MTU of interface batadv_slave_1 is too small (1500) to handle the transport of batman-adv packets. Packets going over this interface will be fragmented on layer2 which could impact the performance. Setting the MTU to 1560 would solve the problem.
[   49.032156][ T5475] batman_adv: batadv0: Not using interface batadv_slave_1 (retrying later): interface not active
[   49.046126][ T5469] bridge0: port 2(bridge_slave_1) entered blocking state
[   49.053282][ T5469] bridge0: port 2(bridge_slave_1) entered disabled state
[   49.060595][ T5469] device bridge_slave_1 entered promiscuous mode
[   49.069883][ T5465] team0: Port device team_slave_0 added
[   49.085758][ T5461] bond0: (slave bond_slave_0): Enslaving as an active interface with an up link
[   49.095146][ T5465] team0: Port device team_slave_1 added
[   49.105886][ T5475] device hsr_slave_0 entered promiscuous mode
[   49.112283][ T5475] device hsr_slave_1 entered promiscuous mode
[   49.118583][ T5475] debugfs: Directory 'hsr0' with parent 'hsr' already present!
[   49.126118][ T5475] Cannot create hsr debugfs directory
[   49.137332][ T5484] device hsr_slave_0 entered promiscuous mode
[   49.143872][ T5484] device hsr_slave_1 entered promiscuous mode
[   49.150152][ T5484] debugfs: Directory 'hsr0' with parent 'hsr' already present!
[   49.157698][ T5484] Cannot create hsr debugfs directory
[   49.163728][ T5469] bond0: (slave bond_slave_0): Enslaving as an active interface with an up link
[   49.174027][ T5469] bond0: (slave bond_slave_1): Enslaving as an active interface with an up link
[   49.183444][ T5461] bond0: (slave bond_slave_1): Enslaving as an active interface with an up link
[   49.215215][ T5465] batman_adv: batadv0: Adding interface: batadv_slave_0
[   49.222223][ T5465] batman_adv: batadv0: The MTU of interface batadv_slave_0 is too small (1500) to handle the transport of batman-adv packets. Packets going over this interface will be fragmented on layer2 which could impact the performance. Setting the MTU to 1560 would solve the problem.
[   49.248093][ T5465] batman_adv: batadv0: Not using interface batadv_slave_0 (retrying later): interface not active
[   49.259804][ T5465] batman_adv: batadv0: Adding interface: batadv_slave_1
[   49.266735][ T5465] batman_adv: batadv0: The MTU of interface batadv_slave_1 is too small (1500) to handle the transport of batman-adv packets. Packets going over this interface will be fragmented on layer2 which could impact the performance. Setting the MTU to 1560 would solve the problem.
[   49.292724][ T5465] batman_adv: batadv0: Not using interface batadv_slave_1 (retrying later): interface not active
[   49.310976][ T5469] team0: Port device team_slave_0 added
[   49.318885][ T5461] team0: Port device team_slave_0 added
[   49.333106][ T5469] team0: Port device team_slave_1 added
[   49.340032][ T5461] team0: Port device team_slave_1 added
[   49.360233][ T5469] batman_adv: batadv0: Adding interface: batadv_slave_0
[   49.367166][ T5469] batman_adv: batadv0: The MTU of interface batadv_slave_0 is too small (1500) to handle the transport of batman-adv packets. Packets going over this interface will be fragmented on layer2 which could impact the performance. Setting the MTU to 1560 would solve the problem.
[   49.393739][ T5469] batman_adv: batadv0: Not using interface batadv_slave_0 (retrying later): interface not active
[   49.408619][ T5461] batman_adv: batadv0: Adding interface: batadv_slave_0
[   49.415546][ T5461] batman_adv: batadv0: The MTU of interface batadv_slave_0 is too small (1500) to handle the transport of batman-adv packets. Packets going over this interface will be fragmented on layer2 which could impact the performance. Setting the MTU to 1560 would solve the problem.
[   49.441883][ T5461] batman_adv: batadv0: Not using interface batadv_slave_0 (retrying later): interface not active
[   49.453477][ T5465] device hsr_slave_0 entered promiscuous mode
[   49.459808][ T5465] device hsr_slave_1 entered promiscuous mode
[   49.465964][ T5465] debugfs: Directory 'hsr0' with parent 'hsr' already present!
[   49.473527][ T5465] Cannot create hsr debugfs directory
[   49.480274][ T5467] netdevsim netdevsim5 netdevsim0: renamed from eth0
[   49.488328][ T5467] netdevsim netdevsim5 netdevsim1: renamed from eth1
[   49.495608][ T5469] batman_adv: batadv0: Adding interface: batadv_slave_1
[   49.502567][ T5469] batman_adv: batadv0: The MTU of interface batadv_slave_1 is too small (1500) to handle the transport of batman-adv packets. Packets going over this interface will be fragmented on layer2 which could impact the performance. Setting the MTU to 1560 would solve the problem.
[   49.528585][ T5469] batman_adv: batadv0: Not using interface batadv_slave_1 (retrying later): interface not active
[   49.540358][ T5461] batman_adv: batadv0: Adding interface: batadv_slave_1
[   49.547287][ T5461] batman_adv: batadv0: The MTU of interface batadv_slave_1 is too small (1500) to handle the transport of batman-adv packets. Packets going over this interface will be fragmented on layer2 which could impact the performance. Setting the MTU to 1560 would solve the problem.
[   49.573280][ T5461] batman_adv: batadv0: Not using interface batadv_slave_1 (retrying later): interface not active
[   49.589345][ T5467] netdevsim netdevsim5 netdevsim2: renamed from eth2
[   49.596772][ T5467] netdevsim netdevsim5 netdevsim3: renamed from eth3
[   49.610684][ T5468] netdevsim netdevsim1 netdevsim0: renamed from eth0
[   49.622297][ T5468] netdevsim netdevsim1 netdevsim1: renamed from eth1
[   49.631316][ T5469] device hsr_slave_0 entered promiscuous mode
[   49.637518][ T5469] device hsr_slave_1 entered promiscuous mode
[   49.643783][ T5469] debugfs: Directory 'hsr0' with parent 'hsr' already present!
[   49.651684][ T5469] Cannot create hsr debugfs directory
[   49.673734][ T5468] netdevsim netdevsim1 netdevsim2: renamed from eth2
[   49.680444][   T34] Bluetooth: hci3: command 0x0409 tx timeout
[   49.686419][   T34] Bluetooth: hci4: command 0x0409 tx timeout
[   49.687255][ T5468] netdevsim netdevsim1 netdevsim3: renamed from eth3
[   49.699134][ T5499] Bluetooth: hci1: command 0x0409 tx timeout
[   49.705092][ T5499] Bluetooth: hci0: command 0x0409 tx timeout
[   49.711416][ T5499] Bluetooth: hci7: command 0x0409 tx timeout
[   49.716047][ T5490] netdevsim netdevsim0 netdevsim0: renamed from eth0
[   49.717419][ T5499] Bluetooth: hci2: command 0x0409 tx timeout
[   49.734896][ T5461] device hsr_slave_0 entered promiscuous mode
[   49.741172][ T5461] device hsr_slave_1 entered promiscuous mode
[   49.747319][ T5461] debugfs: Directory 'hsr0' with parent 'hsr' already present!
[   49.755147][ T5461] Cannot create hsr debugfs directory
[   49.757784][ T5538] Bluetooth: hci5: command 0x0409 tx timeout
[   49.760769][ T5499] Bluetooth: hci6: command 0x0409 tx timeout
[   49.787621][ T5490] netdevsim netdevsim0 netdevsim1: renamed from eth1
[   49.798535][ T5475] netdevsim netdevsim4 netdevsim0: renamed from eth0
[   49.810429][ T5490] netdevsim netdevsim0 netdevsim2: renamed from eth2
[   49.818041][ T5490] netdevsim netdevsim0 netdevsim3: renamed from eth3
[   49.828482][ T5475] netdevsim netdevsim4 netdevsim1: renamed from eth1
[   49.835824][ T5475] netdevsim netdevsim4 netdevsim2: renamed from eth2
[   49.843352][ T5484] netdevsim netdevsim2 netdevsim0: renamed from eth0
[   49.859735][ T5475] netdevsim netdevsim4 netdevsim3: renamed from eth3
[   49.879665][ T5484] netdevsim netdevsim2 netdevsim1: renamed from eth1
[   49.887096][ T5484] netdevsim netdevsim2 netdevsim2: renamed from eth2
[   49.907312][ T5465] netdevsim netdevsim6 netdevsim0: renamed from eth0
[   49.917287][ T5467] 8021q: adding VLAN 0 to HW filter on device bond0
[   49.925232][ T5484] netdevsim netdevsim2 netdevsim3: renamed from eth3
[   49.935372][ T5461] netdevsim netdevsim7 netdevsim0: renamed from eth0
[   49.942720][ T5465] netdevsim netdevsim6 netdevsim1: renamed from eth1
[   49.953817][ T5467] 8021q: adding VLAN 0 to HW filter on device team0
[   49.968446][ T5461] netdevsim netdevsim7 netdevsim1: renamed from eth1
[   49.977296][ T5465] netdevsim netdevsim6 netdevsim2: renamed from eth2
[   50.000826][ T5461] netdevsim netdevsim7 netdevsim2: renamed from eth2
[   50.009023][ T5465] netdevsim netdevsim6 netdevsim3: renamed from eth3
[   50.017650][ T5499] IPv6: ADDRCONF(NETDEV_CHANGE): veth1: link becomes ready
[   50.025432][ T5499] IPv6: ADDRCONF(NETDEV_CHANGE): veth0: link becomes ready
[   50.033041][ T5499] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_bridge: link becomes ready
[   50.041413][ T5499] IPv6: ADDRCONF(NETDEV_CHANGE): bridge_slave_0: link becomes ready
[   50.049630][ T5499] bridge0: port 1(bridge_slave_0) entered blocking state
[   50.056724][ T5499] bridge0: port 1(bridge_slave_0) entered forwarding state
[   50.064225][ T5499] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_bridge: link becomes ready
[   50.072649][ T5499] IPv6: ADDRCONF(NETDEV_CHANGE): bridge_slave_1: link becomes ready
[   50.080875][ T5499] bridge0: port 2(bridge_slave_1) entered blocking state
[   50.087885][ T5499] bridge0: port 2(bridge_slave_1) entered forwarding state
[   50.095292][ T5499] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_bond: link becomes ready
[   50.103587][ T5499] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_bond: link becomes ready
[   50.111835][ T5499] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_team: link becomes ready
[   50.120004][ T5499] IPv6: ADDRCONF(NETDEV_CHANGE): team_slave_0: link becomes ready
[   50.128181][ T5499] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_team: link becomes ready
[   50.136232][ T5499] IPv6: ADDRCONF(NETDEV_CHANGE): team_slave_1: link becomes ready
[   50.144363][ T5499] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_hsr: link becomes ready
[   50.152375][ T5499] IPv6: ADDRCONF(NETDEV_CHANGE): hsr_slave_0: link becomes ready
[   50.160356][ T5499] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_hsr: link becomes ready
[   50.168330][ T5499] IPv6: ADDRCONF(NETDEV_CHANGE): hsr_slave_1: link becomes ready
[   50.176705][ T5469] netdevsim netdevsim3 netdevsim0: renamed from eth0
[   50.185153][ T5469] netdevsim netdevsim3 netdevsim1: renamed from eth1
[   50.192758][ T5469] netdevsim netdevsim3 netdevsim2: renamed from eth2
[   50.200207][ T5461] netdevsim netdevsim7 netdevsim3: renamed from eth3
[   50.210528][ T5468] 8021q: adding VLAN 0 to HW filter on device bond0
[   50.217621][ T5467] IPv6: ADDRCONF(NETDEV_CHANGE): hsr0: link becomes ready
[   50.225235][    T5] IPv6: ADDRCONF(NETDEV_CHANGE): bridge0: link becomes ready
[   50.232911][    T5] IPv6: ADDRCONF(NETDEV_CHANGE): team0: link becomes ready
[   50.241820][ T5490] 8021q: adding VLAN 0 to HW filter on device bond0
[   50.249424][ T5469] netdevsim netdevsim3 netdevsim3: renamed from eth3
[   50.265829][ T5475] 8021q: adding VLAN 0 to HW filter on device bond0
[   50.278931][ T5475] 8021q: adding VLAN 0 to HW filter on device team0
[   50.286222][    T5] IPv6: ADDRCONF(NETDEV_CHANGE): veth1: link becomes ready
[   50.293979][    T5] IPv6: ADDRCONF(NETDEV_CHANGE): veth0: link becomes ready
[   50.309982][ T5490] 8021q: adding VLAN 0 to HW filter on device team0
[   50.325720][ T5468] 8021q: adding VLAN 0 to HW filter on device team0
[   50.332901][    T7] IPv6: ADDRCONF(NETDEV_CHANGE): veth1: link becomes ready
[   50.340477][    T7] IPv6: ADDRCONF(NETDEV_CHANGE): veth0: link becomes ready
[   50.347853][    T7] IPv6: ADDRCONF(NETDEV_CHANGE): veth1: link becomes ready
[   50.355209][    T7] IPv6: ADDRCONF(NETDEV_CHANGE): veth0: link becomes ready
[   50.362667][    T7] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_bridge: link becomes ready
[   50.370987][    T7] IPv6: ADDRCONF(NETDEV_CHANGE): bridge_slave_0: link becomes ready
[   50.379118][    T7] bridge0: port 1(bridge_slave_0) entered blocking state
[   50.386119][    T7] bridge0: port 1(bridge_slave_0) entered forwarding state
[   50.393598][    T7] IPv6: ADDRCONF(NETDEV_CHANGE): bridge0: link becomes ready
[   50.404906][ T5484] 8021q: adding VLAN 0 to HW filter on device bond0
[   50.416402][ T5484] 8021q: adding VLAN 0 to HW filter on device team0
[   50.424724][ T5538] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_bridge: link becomes ready
[   50.433325][ T5538] IPv6: ADDRCONF(NETDEV_CHANGE): bridge_slave_1: link becomes ready
[   50.441807][ T5538] bridge0: port 2(bridge_slave_1) entered blocking state
[   50.448830][ T5538] bridge0: port 2(bridge_slave_1) entered forwarding state
[   50.456340][ T5538] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_bond: link becomes ready
[   50.464917][ T5538] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_bridge: link becomes ready
[   50.473353][ T5538] IPv6: ADDRCONF(NETDEV_CHANGE): bridge_slave_0: link becomes ready
[   50.482042][ T5538] bridge0: port 1(bridge_slave_0) entered blocking state
[   50.489083][ T5538] bridge0: port 1(bridge_slave_0) entered forwarding state
[   50.496613][ T5538] IPv6: ADDRCONF(NETDEV_CHANGE): veth1: link becomes ready
[   50.504383][ T5538] IPv6: ADDRCONF(NETDEV_CHANGE): veth0: link becomes ready
[   50.511915][ T5538] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_bond: link becomes ready
[   50.528550][   T34] IPv6: ADDRCONF(NETDEV_CHANGE): bridge0: link becomes ready
[   50.536133][   T34] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_bridge: link becomes ready
[   50.544576][   T34] IPv6: ADDRCONF(NETDEV_CHANGE): bridge_slave_1: link becomes ready
[   50.553085][   T34] bridge0: port 2(bridge_slave_1) entered blocking state
[   50.560105][   T34] bridge0: port 2(bridge_slave_1) entered forwarding state
[   50.567626][   T34] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_bond: link becomes ready
[   50.575786][   T34] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_bond: link becomes ready
[   50.583961][   T34] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_team: link becomes ready
[   50.592094][   T34] IPv6: ADDRCONF(NETDEV_CHANGE): team_slave_0: link becomes ready
[   50.600157][   T34] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_team: link becomes ready
[   50.608260][   T34] IPv6: ADDRCONF(NETDEV_CHANGE): team_slave_1: link becomes ready
[   50.616492][   T34] IPv6: ADDRCONF(NETDEV_CHANGE): team0: link becomes ready
[   50.640411][ T5461] 8021q: adding VLAN 0 to HW filter on device bond0
[   50.648791][    T5] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_bridge: link becomes ready
[   50.657061][    T5] IPv6: ADDRCONF(NETDEV_CHANGE): bridge_slave_0: link becomes ready
[   50.665905][    T5] bridge0: port 1(bridge_slave_0) entered blocking state
[   50.672927][    T5] bridge0: port 1(bridge_slave_0) entered forwarding state
[   50.680527][    T5] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_bridge: link becomes ready
[   50.688804][    T5] IPv6: ADDRCONF(NETDEV_CHANGE): bridge_slave_0: link becomes ready
[   50.696875][    T5] bridge0: port 1(bridge_slave_0) entered blocking state
[   50.703889][    T5] bridge0: port 1(bridge_slave_0) entered forwarding state
[   50.711256][    T5] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_team: link becomes ready
[   50.719456][    T5] IPv6: ADDRCONF(NETDEV_CHANGE): team_slave_0: link becomes ready
[   50.727493][    T5] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_bridge: link becomes ready
[   50.735819][    T5] IPv6: ADDRCONF(NETDEV_CHANGE): bridge_slave_1: link becomes ready
[   50.744016][    T5] bridge0: port 2(bridge_slave_1) entered blocking state
[   50.751033][    T5] bridge0: port 2(bridge_slave_1) entered forwarding state
[   50.758387][    T5] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_bond: link becomes ready
[   50.766569][    T5] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_bond: link becomes ready
[   50.774864][    T5] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_team: link becomes ready
[   50.782954][    T5] IPv6: ADDRCONF(NETDEV_CHANGE): team_slave_0: link becomes ready
[   50.791035][    T5] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_team: link becomes ready
[   50.799131][    T5] IPv6: ADDRCONF(NETDEV_CHANGE): team_slave_1: link becomes ready
[   50.807133][    T5] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_hsr: link becomes ready
[   50.815114][    T5] IPv6: ADDRCONF(NETDEV_CHANGE): hsr_slave_0: link becomes ready
[   50.823068][    T5] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_hsr: link becomes ready
[   50.831109][    T5] IPv6: ADDRCONF(NETDEV_CHANGE): hsr_slave_0: link becomes ready
[   50.846013][ T5484] hsr0: Slave A (hsr_slave_0) is not up; please bring it up to get a fully working HSR network
[   50.856469][ T5484] hsr0: Slave B (hsr_slave_1) is not up; please bring it up to get a fully working HSR network
[   50.874903][ T5468] hsr0: Slave B (hsr_slave_1) is not up; please bring it up to get a fully working HSR network
[   50.885840][ T5468] IPv6: ADDRCONF(NETDEV_CHANGE): hsr0: link becomes ready
[   50.898097][ T5461] 8021q: adding VLAN 0 to HW filter on device team0
[   50.905636][    T5] IPv6: ADDRCONF(NETDEV_CHANGE): bridge0: link becomes ready
[   50.913458][    T5] IPv6: ADDRCONF(NETDEV_CHANGE): bridge0: link becomes ready
[   50.921108][    T5] IPv6: ADDRCONF(NETDEV_CHANGE): team0: link becomes ready
[   50.928638][    T5] IPv6: ADDRCONF(NETDEV_CHANGE): team0: link becomes ready
[   50.936063][    T5] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_bridge: link becomes ready
[   50.944434][    T5] IPv6: ADDRCONF(NETDEV_CHANGE): bridge_slave_1: link becomes ready
[   50.952716][    T5] bridge0: port 2(bridge_slave_1) entered blocking state
[   50.959737][    T5] bridge0: port 2(bridge_slave_1) entered forwarding state
[   50.967282][    T5] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_bond: link becomes ready
[   50.975628][    T5] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_bond: link becomes ready
[   50.983874][    T5] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_team: link becomes ready
[   50.992038][    T5] IPv6: ADDRCONF(NETDEV_CHANGE): team_slave_0: link becomes ready
[   51.000210][    T5] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_team: link becomes ready
[   51.008431][    T5] IPv6: ADDRCONF(NETDEV_CHANGE): team_slave_1: link becomes ready
[   51.016441][    T5] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_hsr: link becomes ready
[   51.024511][    T5] IPv6: ADDRCONF(NETDEV_CHANGE): hsr_slave_0: link becomes ready
[   51.032442][    T5] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_hsr: link becomes ready
[   51.040581][    T5] IPv6: ADDRCONF(NETDEV_CHANGE): hsr_slave_1: link becomes ready
[   51.048547][    T5] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_hsr: link becomes ready
[   51.056506][    T5] IPv6: ADDRCONF(NETDEV_CHANGE): hsr_slave_1: link becomes ready
[   51.064453][    T5] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_team: link becomes ready
[   51.072655][    T5] IPv6: ADDRCONF(NETDEV_CHANGE): team_slave_1: link becomes ready
[   51.080899][    T5] IPv6: ADDRCONF(NETDEV_CHANGE): vxcan1: link becomes ready
[   51.088371][    T5] IPv6: ADDRCONF(NETDEV_CHANGE): vxcan0: link becomes ready
[   51.095663][    T5] IPv6: ADDRCONF(NETDEV_CHANGE): veth1: link becomes ready
[   51.103068][    T5] IPv6: ADDRCONF(NETDEV_CHANGE): veth0: link becomes ready
[   51.111726][    T5] IPv6: ADDRCONF(NETDEV_CHANGE): hsr0: link becomes ready
[   51.122408][ T5475] hsr0: Slave A (hsr_slave_0) is not up; please bring it up to get a fully working HSR network
[   51.132786][ T5475] hsr0: Slave B (hsr_slave_1) is not up; please bring it up to get a fully working HSR network
[   51.148742][ T5467] 8021q: adding VLAN 0 to HW filter on device batadv0
[   51.158555][ T5490] hsr0: Slave B (hsr_slave_1) is not up; please bring it up to get a fully working HSR network
[   51.169567][ T5490] IPv6: ADDRCONF(NETDEV_CHANGE): hsr0: link becomes ready
[   51.177421][ T5538] IPv6: ADDRCONF(NETDEV_CHANGE): team0: link becomes ready
[   51.185104][ T5538] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_hsr: link becomes ready
[   51.193181][ T5538] IPv6: ADDRCONF(NETDEV_CHANGE): hsr_slave_0: link becomes ready
[   51.201655][ T5538] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_hsr: link becomes ready
[   51.210075][ T5538] IPv6: ADDRCONF(NETDEV_CHANGE): hsr_slave_1: link becomes ready
[   51.218193][ T5538] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_hsr: link becomes ready
[   51.226129][ T5538] IPv6: ADDRCONF(NETDEV_CHANGE): hsr_slave_1: link becomes ready
[   51.234159][ T5538] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_bridge: link becomes ready
[   51.242637][ T5538] IPv6: ADDRCONF(NETDEV_CHANGE): bridge_slave_0: link becomes ready
[   51.250970][ T5538] bridge0: port 1(bridge_slave_0) entered blocking state
[   51.257989][ T5538] bridge0: port 1(bridge_slave_0) entered forwarding state
[   51.265819][ T5538] IPv6: ADDRCONF(NETDEV_CHANGE): hsr0: link becomes ready
[   51.273176][ T5538] IPv6: ADDRCONF(NETDEV_CHANGE): bridge0: link becomes ready
[   51.293879][ T5484] 8021q: adding VLAN 0 to HW filter on device batadv0
[   51.309606][ T5499] IPv6: ADDRCONF(NETDEV_CHANGE): vxcan1: link becomes ready
[   51.317097][ T5499] IPv6: ADDRCONF(NETDEV_CHANGE): vxcan0: link becomes ready
[   51.325096][ T5499] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_bridge: link becomes ready
[   51.333489][ T5499] IPv6: ADDRCONF(NETDEV_CHANGE): bridge_slave_1: link becomes ready
[   51.341848][ T5499] bridge0: port 2(bridge_slave_1) entered blocking state
[   51.348923][ T5499] bridge0: port 2(bridge_slave_1) entered forwarding state
[   51.356475][ T5499] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_bond: link becomes ready
[   51.370384][ T5469] 8021q: adding VLAN 0 to HW filter on device bond0
[   51.381949][ T5465] 8021q: adding VLAN 0 to HW filter on device bond0
[   51.397651][ T5468] 8021q: adding VLAN 0 to HW filter on device batadv0
[   51.407659][   T17] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_bond: link becomes ready
[   51.416072][   T17] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_team: link becomes ready
[   51.424912][   T17] IPv6: ADDRCONF(NETDEV_CHANGE): team_slave_0: link becomes ready
[   51.433029][   T17] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_team: link becomes ready
[   51.441471][   T17] IPv6: ADDRCONF(NETDEV_CHANGE): team_slave_1: link becomes ready
[   51.449581][   T17] IPv6: ADDRCONF(NETDEV_CHANGE): vxcan1: link becomes ready
[   51.456881][   T17] IPv6: ADDRCONF(NETDEV_CHANGE): vxcan0: link becomes ready
[   51.464443][   T17] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_hsr: link becomes ready
[   51.472594][   T17] IPv6: ADDRCONF(NETDEV_CHANGE): hsr_slave_0: link becomes ready
[   51.480569][   T17] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_hsr: link becomes ready
[   51.488617][   T17] IPv6: ADDRCONF(NETDEV_CHANGE): hsr_slave_1: link becomes ready
[   51.502067][ T5469] 8021q: adding VLAN 0 to HW filter on device team0
[   51.509555][ T5461] IPv6: ADDRCONF(NETDEV_CHANGE): hsr0: link becomes ready
[   51.524491][ T5465] 8021q: adding VLAN 0 to HW filter on device team0
[   51.542133][   T17] IPv6: ADDRCONF(NETDEV_CHANGE): team0: link becomes ready
[   51.550027][   T17] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_virt_wifi: link becomes ready
[   51.558784][   T17] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_virt_wifi: link becomes ready
[   51.566988][   T17] IPv6: ADDRCONF(NETDEV_CHANGE): veth1: link becomes ready
[   51.574568][   T17] IPv6: ADDRCONF(NETDEV_CHANGE): veth0: link becomes ready
[   51.582350][   T17] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_virt_wifi: link becomes ready
[   51.590993][   T17] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_virt_wifi: link becomes ready
[   51.599339][   T17] IPv6: ADDRCONF(NETDEV_CHANGE): veth1: link becomes ready
[   51.606665][   T17] IPv6: ADDRCONF(NETDEV_CHANGE): veth0: link becomes ready
[   51.614142][   T17] IPv6: ADDRCONF(NETDEV_CHANGE): vxcan1: link becomes ready
[   51.621610][   T17] IPv6: ADDRCONF(NETDEV_CHANGE): vxcan0: link becomes ready
[   51.629022][   T17] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_bridge: link becomes ready
[   51.637331][   T17] IPv6: ADDRCONF(NETDEV_CHANGE): bridge_slave_0: link becomes ready
[   51.645577][   T17] bridge0: port 1(bridge_slave_0) entered blocking state
[   51.652594][   T17] bridge0: port 1(bridge_slave_0) entered forwarding state
[   51.660041][   T17] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_vlan: link becomes ready
[   51.667903][   T17] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_vlan: link becomes ready
[   51.676357][   T17] IPv6: ADDRCONF(NETDEV_CHANGE): bridge0: link becomes ready
[   51.684093][   T17] IPv6: ADDRCONF(NETDEV_CHANGE): vlan0: link becomes ready
[   51.691613][   T17] IPv6: ADDRCONF(NETDEV_CHANGE): vlan1: link becomes ready
[   51.704705][ T5467] device veth0_vlan entered promiscuous mode
[   51.715065][ T5475] 8021q: adding VLAN 0 to HW filter on device batadv0
[   51.723357][ T5484] device veth0_vlan entered promiscuous mode
[   51.737377][ T5461] 8021q: adding VLAN 0 to HW filter on device batadv0
[   51.747304][    T7] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_bridge: link becomes ready
[   51.755930][    T7] IPv6: ADDRCONF(NETDEV_CHANGE): bridge_slave_0: link becomes ready
[   51.757803][ T5538] Bluetooth: hci0: command 0x041b tx timeout
[   51.764559][    T7] bridge0: port 1(bridge_slave_0) entered blocking state
[   51.770279][ T5538] Bluetooth: hci1: command 0x041b tx timeout
[   51.776874][    T7] bridge0: port 1(bridge_slave_0) entered forwarding state
[   51.783241][ T5538] Bluetooth: hci4: command 0x041b tx timeout
[   51.791280][    T7] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_bridge: link becomes ready
[   51.804560][    T7] IPv6: ADDRCONF(NETDEV_CHANGE): bridge_slave_1: link becomes ready
[   51.812913][    T7] bridge0: port 2(bridge_slave_1) entered blocking state
[   51.819937][    T7] bridge0: port 2(bridge_slave_1) entered forwarding state
[   51.827341][    T7] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_vlan: link becomes ready
[   51.835830][    T7] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_vlan: link becomes ready
[   51.843958][    T7] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_bond: link becomes ready
[   51.852478][    T7] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_bridge: link becomes ready
[   51.860843][    T7] IPv6: ADDRCONF(NETDEV_CHANGE): bridge_slave_1: link becomes ready
[   51.869159][    T7] bridge0: port 2(bridge_slave_1) entered blocking state
[   51.876177][    T7] bridge0: port 2(bridge_slave_1) entered forwarding state
[   51.883665][    T7] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_bond: link becomes ready
[   51.891968][    T7] IPv6: ADDRCONF(NETDEV_CHANGE): vxcan1: link becomes ready
[   51.899345][    T7] IPv6: ADDRCONF(NETDEV_CHANGE): vxcan0: link becomes ready
[   51.906657][    T7] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_virt_wifi: link becomes ready
[   51.915061][    T7] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_virt_wifi: link becomes ready
[   51.923457][    T7] IPv6: ADDRCONF(NETDEV_CHANGE): vxcan1: link becomes ready
[   51.930801][    T7] IPv6: ADDRCONF(NETDEV_CHANGE): vxcan0: link becomes ready
[   51.938199][    T7] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_vlan: link becomes ready
[   51.946023][    T7] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_vlan: link becomes ready
[   51.954061][    T7] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_bond: link becomes ready
[   51.962273][    T7] Bluetooth: hci2: command 0x041b tx timeout
[   51.970924][ T5467] device veth1_vlan entered promiscuous mode
[   51.979393][ T5490] 8021q: adding VLAN 0 to HW filter on device batadv0
[   51.979427][    T7] Bluetooth: hci7: command 0x041b tx timeout
[   51.986425][ T5468] device veth0_vlan entered promiscuous mode
[   51.992299][    T7] Bluetooth: hci3: command 0x041b tx timeout
[   52.002125][ T5484] device veth1_vlan entered promiscuous mode
[   52.005091][ T5499] Bluetooth: hci6: command 0x041b tx timeout
[   52.016161][ T5499] Bluetooth: hci5: command 0x041b tx timeout
[   52.019152][ T5465] hsr0: Slave A (hsr_slave_0) is not up; please bring it up to get a fully working HSR network
[   52.033128][ T5465] hsr0: Slave B (hsr_slave_1) is not up; please bring it up to get a fully working HSR network
[   52.050042][    T7] IPv6: ADDRCONF(NETDEV_CHANGE): macvlan0: link becomes ready
[   52.057917][    T7] IPv6: ADDRCONF(NETDEV_CHANGE): bridge0: link becomes ready
[   52.065484][    T7] IPv6: ADDRCONF(NETDEV_CHANGE): vlan0: link becomes ready
[   52.073152][    T7] IPv6: ADDRCONF(NETDEV_CHANGE): vlan1: link becomes ready
[   52.080733][    T7] IPv6: ADDRCONF(NETDEV_CHANGE): macvlan0: link becomes ready
[   52.088525][    T7] IPv6: ADDRCONF(NETDEV_CHANGE): macvlan1: link becomes ready
[   52.096196][    T7] IPv6: ADDRCONF(NETDEV_CHANGE): vlan0: link becomes ready
[   52.103750][    T7] IPv6: ADDRCONF(NETDEV_CHANGE): vlan1: link becomes ready
[   52.111204][    T7] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_bond: link becomes ready
[   52.119467][    T7] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_team: link becomes ready
[   52.127528][    T7] IPv6: ADDRCONF(NETDEV_CHANGE): team_slave_0: link becomes ready
[   52.135746][    T7] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_team: link becomes ready
[   52.143918][    T7] IPv6: ADDRCONF(NETDEV_CHANGE): team_slave_1: link becomes ready
[   52.152115][    T7] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_hsr: link becomes ready
[   52.160207][    T7] IPv6: ADDRCONF(NETDEV_CHANGE): hsr_slave_0: link becomes ready
[   52.168326][    T7] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_team: link becomes ready
[   52.176400][    T7] IPv6: ADDRCONF(NETDEV_CHANGE): team_slave_0: link becomes ready
[   52.184595][    T7] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_team: link becomes ready
[   52.192893][    T7] IPv6: ADDRCONF(NETDEV_CHANGE): team_slave_1: link becomes ready
[   52.201108][    T7] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_hsr: link becomes ready
[   52.209230][    T7] IPv6: ADDRCONF(NETDEV_CHANGE): hsr_slave_0: link becomes ready
[   52.217114][    T7] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_hsr: link becomes ready
[   52.225342][    T7] IPv6: ADDRCONF(NETDEV_CHANGE): hsr_slave_1: link becomes ready
[   52.233398][    T7] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_macvtap: link becomes ready
[   52.241778][    T7] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_macvtap: link becomes ready
[   52.252988][ T5468] device veth1_vlan entered promiscuous mode
[   52.265667][ T5467] device veth0_macvtap entered promiscuous mode
[   52.273046][    T7] IPv6: ADDRCONF(NETDEV_CHANGE): macvlan1: link becomes ready
[   52.283271][    T7] IPv6: ADDRCONF(NETDEV_CHANGE): macvlan0: link becomes ready
[   52.291262][    T7] IPv6: ADDRCONF(NETDEV_CHANGE): macvlan1: link becomes ready
[   52.299447][    T7] IPv6: ADDRCONF(NETDEV_CHANGE): team0: link becomes ready
[   52.306875][    T7] IPv6: ADDRCONF(NETDEV_CHANGE): hsr0: link becomes ready
[   52.314321][    T7] IPv6: ADDRCONF(NETDEV_CHANGE): team0: link becomes ready
[   52.322008][    T7] IPv6: ADDRCONF(NETDEV_CHANGE): macvtap0: link becomes ready
[   52.329745][    T7] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_hsr: link becomes ready
[   52.337926][    T7] IPv6: ADDRCONF(NETDEV_CHANGE): hsr_slave_1: link becomes ready
[   52.346269][ T5469] IPv6: ADDRCONF(NETDEV_CHANGE): hsr0: link becomes ready
[   52.362550][ T5484] device veth0_macvtap entered promiscuous mode
[   52.370420][ T5467] device veth1_macvtap entered promiscuous mode
[   52.385853][ T5465] 8021q: adding VLAN 0 to HW filter on device batadv0
[   52.397434][    T5] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_virt_wifi: link becomes ready
[   52.406116][    T5] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_virt_wifi: link becomes ready
[   52.414714][    T5] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_macvtap: link becomes ready
[   52.423916][    T5] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_macvtap: link becomes ready
[   52.432000][    T5] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_macvtap: link becomes ready
[   52.440097][    T5] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_macvtap: link becomes ready
[   52.448277][    T5] IPv6: ADDRCONF(NETDEV_CHANGE): vxcan1: link becomes ready
[   52.455620][    T5] IPv6: ADDRCONF(NETDEV_CHANGE): vxcan0: link becomes ready
[   52.463079][    T5] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_virt_wifi: link becomes ready
[   52.471463][    T5] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_virt_wifi: link becomes ready
[   52.480091][ T5468] device veth0_macvtap entered promiscuous mode
[   52.488385][ T5484] device veth1_macvtap entered promiscuous mode
[   52.500032][ T5467] batman_adv: batadv0: Interface activated: batadv_slave_0
[   52.509181][ T5467] batman_adv: batadv0: Interface activated: batadv_slave_1
[   52.518247][ T5467] netdevsim netdevsim5 netdevsim0: set [1, 0] type 2 family 0 port 6081 - 0
[   52.526945][ T5467] netdevsim netdevsim5 netdevsim1: set [1, 0] type 2 family 0 port 6081 - 0
[   52.535716][ T5467] netdevsim netdevsim5 netdevsim2: set [1, 0] type 2 family 0 port 6081 - 0
[   52.544876][ T5467] netdevsim netdevsim5 netdevsim3: set [1, 0] type 2 family 0 port 6081 - 0
[   52.563002][ T5468] device veth1_macvtap entered promiscuous mode
[   52.569868][ T5499] IPv6: ADDRCONF(NETDEV_CHANGE): macvtap0: link becomes ready
[   52.577657][ T5499] IPv6: ADDRCONF(NETDEV_CHANGE): macsec0: link becomes ready
[   52.585820][ T5499] IPv6: ADDRCONF(NETDEV_CHANGE): macvtap0: link becomes ready
[   52.594069][ T5499] IPv6: ADDRCONF(NETDEV_CHANGE): macsec0: link becomes ready
[   52.601935][ T5499] IPv6: ADDRCONF(NETDEV_CHANGE): batadv_slave_0: link becomes ready
[   52.610207][ T5499] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_batadv: link becomes ready
[   52.618697][ T5499] IPv6: ADDRCONF(NETDEV_CHANGE): batadv_slave_1: link becomes ready
[   52.627302][ T5499] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_batadv: link becomes ready
[   52.635642][ T5499] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_virt_wifi: link becomes ready
[   52.644164][ T5499] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_virt_wifi: link becomes ready
[   52.652514][ T5499] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_vlan: link becomes ready
[   52.660368][ T5499] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_vlan: link becomes ready
[   52.669341][ T5499] IPv6: ADDRCONF(NETDEV_CHANGE): vlan0: link becomes ready
[   52.676791][ T5499] IPv6: ADDRCONF(NETDEV_CHANGE): vlan1: link becomes ready
[   52.684353][ T5499] IPv6: ADDRCONF(NETDEV_CHANGE): vxcan1: link becomes ready
[   52.691938][ T5499] IPv6: ADDRCONF(NETDEV_CHANGE): vxcan0: link becomes ready
[   52.702466][ T5484] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   52.712943][ T5484] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   52.723440][ T5484] batman_adv: batadv0: Interface activated: batadv_slave_0
[   52.735014][ T5461] device veth0_vlan entered promiscuous mode
[   52.741975][ T5490] device veth0_vlan entered promiscuous mode
[   52.755671][ T5469] 8021q: adding VLAN 0 to HW filter on device batadv0
[   52.762895][   T34] IPv6: ADDRCONF(NETDEV_CHANGE): batadv_slave_0: link becomes ready
[   52.771170][   T34] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_batadv: link becomes ready
[   52.779813][   T34] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_vlan: link becomes ready
[   52.787609][   T34] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_vlan: link becomes ready
[   52.796678][ T5484] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   52.807633][ T5484] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   52.818123][ T5484] batman_adv: batadv0: Interface activated: batadv_slave_1
[   52.837650][ T5475] device veth0_vlan entered promiscuous mode
[   52.846292][ T5490] device veth1_vlan entered promiscuous mode
[   52.858549][   T34] IPv6: ADDRCONF(NETDEV_CHANGE): macvlan0: link becomes ready
[   52.866222][   T34] IPv6: ADDRCONF(NETDEV_CHANGE): vlan0: link becomes ready
[   52.873901][   T34] IPv6: ADDRCONF(NETDEV_CHANGE): vlan1: link becomes ready
[   52.881583][   T34] IPv6: ADDRCONF(NETDEV_CHANGE): batadv_slave_1: link becomes ready
[   52.890038][   T34] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_batadv: link becomes ready
[   52.898562][   T34] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_vlan: link becomes ready
[   52.906470][   T34] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_vlan: link becomes ready
[   52.914530][   T34] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_virt_wifi: link becomes ready
[   52.922950][   T34] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_virt_wifi: link becomes ready
[   52.931758][ T5461] device veth1_vlan entered promiscuous mode
[   52.953739][   T34] IPv6: ADDRCONF(NETDEV_CHANGE): macvlan0: link becomes ready
[   52.961619][   T34] IPv6: ADDRCONF(NETDEV_CHANGE): macvlan1: link becomes ready
[   52.969740][   T34] IPv6: ADDRCONF(NETDEV_CHANGE): vlan0: link becomes ready
[   52.977123][   T34] IPv6: ADDRCONF(NETDEV_CHANGE): vlan1: link becomes ready
[   52.984624][   T34] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_vlan: link becomes ready
[   52.992804][   T34] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_vlan: link becomes ready
[   53.000935][   T34] IPv6: ADDRCONF(NETDEV_CHANGE): vlan0: link becomes ready
[   53.008370][   T34] IPv6: ADDRCONF(NETDEV_CHANGE): vlan1: link becomes ready
[   53.022445][    T8] wlan0: Created IBSS using preconfigured BSSID 50:50:50:50:50:50
[   53.033198][ T5475] device veth1_vlan entered promiscuous mode
[   53.037352][    T8] wlan0: Creating new IBSS network, BSSID 50:50:50:50:50:50
[   53.039394][   T22] wlan1: Created IBSS using preconfigured BSSID 50:50:50:50:50:50
[   53.056774][ T5475] device veth0_macvtap entered promiscuous mode
[   53.056925][   T22] wlan1: Creating new IBSS network, BSSID 50:50:50:50:50:50
[   53.068651][ T5484] netdevsim netdevsim2 netdevsim0: set [1, 0] type 2 family 0 port 6081 - 0
[   53.079551][ T5484] netdevsim netdevsim2 netdevsim1: set [1, 0] type 2 family 0 port 6081 - 0
[   53.088647][ T5484] netdevsim netdevsim2 netdevsim2: set [1, 0] type 2 family 0 port 6081 - 0
[   53.097335][ T5484] netdevsim netdevsim2 netdevsim3: set [1, 0] type 2 family 0 port 6081 - 0
[   53.106659][ T5465] device veth0_vlan entered promiscuous mode
[   53.113723][ T5468] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   53.124334][ T5468] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   53.134860][ T5468] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   53.145477][ T5468] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   53.155818][ T5468] batman_adv: batadv0: Interface activated: batadv_slave_0
[   53.165169][ T5468] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   53.175768][ T5468] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   53.185735][ T5468] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   53.196303][ T5468] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   53.206890][ T5468] batman_adv: batadv0: Interface activated: batadv_slave_1
[   53.214868][   T17] IPv6: ADDRCONF(NETDEV_CHANGE): macvlan1: link becomes ready
[   53.222924][   T17] IPv6: ADDRCONF(NETDEV_CHANGE): macvlan0: link becomes ready
[   53.230717][   T17] IPv6: ADDRCONF(NETDEV_CHANGE): macvlan1: link becomes ready
[   53.238412][   T17] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   53.245827][   T17] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
[   53.253426][   T17] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_macvtap: link becomes ready
[   53.261573][   T17] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_macvtap: link becomes ready
[   53.269729][   T17] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_virt_wifi: link becomes ready
[   53.278351][   T17] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_virt_wifi: link becomes ready
[   53.286625][   T17] IPv6: ADDRCONF(NETDEV_CHANGE): batadv_slave_0: link becomes ready
[   53.294919][   T17] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_batadv: link becomes ready
[   53.303238][   T17] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_macvtap: link becomes ready
[   53.311494][   T17] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_macvtap: link becomes ready
[   53.319666][   T17] IPv6: ADDRCONF(NETDEV_CHANGE): batadv_slave_1: link becomes ready
[   53.328025][   T17] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_batadv: link becomes ready
[   53.337901][ T5475] device veth1_macvtap entered promiscuous mode
[   53.349112][ T5465] device veth1_vlan entered promiscuous mode
[   53.357422][   T17] IPv6: ADDRCONF(NETDEV_CHANGE): macvlan0: link becomes ready
[   53.365448][   T17] IPv6: ADDRCONF(NETDEV_CHANGE): macvlan1: link becomes ready
[   53.373454][   T17] IPv6: ADDRCONF(NETDEV_CHANGE): macvtap0: link becomes ready
[   53.381162][   T17] IPv6: ADDRCONF(NETDEV_CHANGE): macsec0: link becomes ready
[   53.392071][ T5490] device veth0_macvtap entered promiscuous mode
[   53.400102][ T5461] device veth0_macvtap entered promiscuous mode
[   53.411120][ T5468] netdevsim netdevsim1 netdevsim0: set [1, 0] type 2 family 0 port 6081 - 0
[   53.419947][ T5468] netdevsim netdevsim1 netdevsim1: set [1, 0] type 2 family 0 port 6081 - 0
[   53.428797][ T5468] netdevsim netdevsim1 netdevsim2: set [1, 0] type 2 family 0 port 6081 - 0
[   53.437478][ T5468] netdevsim netdevsim1 netdevsim3: set [1, 0] type 2 family 0 port 6081 - 0
[   53.453938][ T5499] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_macvtap: link becomes ready
[   53.462321][ T5499] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_macvtap: link becomes ready
[   53.471351][    T7] IPv6: ADDRCONF(NETDEV_CHANGE): macvtap0: link becomes ready
[   53.480129][ T5490] device veth1_macvtap entered promiscuous mode
[   53.489605][ T5469] device veth0_vlan entered promiscuous mode
[   53.496408][ T5461] device veth1_macvtap entered promiscuous mode
2024/04/16 17:27:38 executed programs: 8
[   53.517270][ T5475] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   53.528238][ T5475] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   53.541461][ T5475] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   53.554877][ T5475] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   53.565770][ T5475] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   53.578872][ T5475] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   53.589474][ T5475] batman_adv: batadv0: Interface activated: batadv_slave_0
[   53.605335][ T5469] device veth1_vlan entered promiscuous mode
[   53.612772][ T5538] IPv6: ADDRCONF(NETDEV_CHANGE): macsec0: link becomes ready
[   53.621283][ T5538] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_vlan: link becomes ready
[   53.629434][ T5538] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_vlan: link becomes ready
[   53.637932][ T5538] IPv6: ADDRCONF(NETDEV_CHANGE): macvlan0: link becomes ready
[   53.645781][ T5538] IPv6: ADDRCONF(NETDEV_CHANGE): batadv_slave_0: link becomes ready
[   53.657025][ T5538] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_batadv: link becomes ready
[   53.666157][ T5538] IPv6: ADDRCONF(NETDEV_CHANGE): vlan0: link becomes ready
[   53.673873][ T5538] IPv6: ADDRCONF(NETDEV_CHANGE): vlan1: link becomes ready
[   53.691475][    T8] wlan0: Created IBSS using preconfigured BSSID 50:50:50:50:50:50
[   53.697246][ T5461] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   53.710367][    T8] wlan0: Creating new IBSS network, BSSID 50:50:50:50:50:50
[   53.710639][ T5461] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   53.727521][ T5461] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   53.740711][ T5461] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   53.750669][ T5461] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   53.762581][ T5461] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   53.772548][ T5461] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   53.783371][ T5461] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   53.794275][ T5461] batman_adv: batadv0: Interface activated: batadv_slave_0
[   53.805875][ T5490] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   53.817050][ T5490] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   53.826931][ T5490] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   53.837414][ T5490] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   53.847463][   T17] Bluetooth: hci4: command 0x040f tx timeout
[   53.847525][ T5490] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   53.864232][ T5499] Bluetooth: hci1: command 0x040f tx timeout
[   53.867782][ T5490] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   53.870202][ T5499] Bluetooth: hci0: command 0x040f tx timeout
[   53.880518][ T5490] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   53.896326][ T5490] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   53.906213][ T5490] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   53.916760][ T5490] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   53.927693][ T5490] batman_adv: batadv0: Interface activated: batadv_slave_0
[   53.935881][ T5475] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   53.946988][ T5475] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   53.957193][ T5475] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   53.967698][ T5475] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   53.977563][ T5475] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   53.988140][ T5475] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   53.998154][   T17] Bluetooth: hci2: command 0x040f tx timeout
[   53.999193][ T5475] batman_adv: batadv0: Interface activated: batadv_slave_1
[   54.016486][ T5465] device veth0_macvtap entered promiscuous mode
[   54.029193][   T34] IPv6: ADDRCONF(NETDEV_CHANGE): macvlan1: link becomes ready
[   54.036870][   T34] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   54.044558][   T34] IPv6: ADDRCONF(NETDEV_CHANGE): batadv_slave_0: link becomes ready
[   54.052778][   T34] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_batadv: link becomes ready
[   54.061474][   T34] IPv6: ADDRCONF(NETDEV_CHANGE): batadv_slave_0: link becomes ready
[   54.069799][   T34] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_batadv: link becomes ready
[   54.078371][   T34] IPv6: ADDRCONF(NETDEV_CHANGE): batadv_slave_1: link becomes ready
[   54.086717][   T34] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_batadv: link becomes ready
[   54.095016][   T34] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_macvtap: link becomes ready
[   54.103130][   T34] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_macvtap: link becomes ready
[   54.111378][   T34] Bluetooth: hci5: command 0x040f tx timeout
[   54.117370][   T34] Bluetooth: hci6: command 0x040f tx timeout
[   54.119117][ T5461] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   54.123507][   T34] Bluetooth: hci3: command 0x040f tx timeout
[   54.135215][ T5461] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   54.139805][   T34] Bluetooth: hci7: command 0x040f tx timeout
[   54.156243][ T5461] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   54.166768][ T5461] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   54.176579][ T5461] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   54.187058][ T5461] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   54.196939][ T5461] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   54.207421][ T5461] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   54.218517][ T5461] batman_adv: batadv0: Interface activated: batadv_slave_1
[   54.228167][ T5475] netdevsim netdevsim4 netdevsim0: set [1, 0] type 2 family 0 port 6081 - 0
[   54.236908][ T5475] netdevsim netdevsim4 netdevsim1: set [1, 0] type 2 family 0 port 6081 - 0
[   54.245884][ T5475] netdevsim netdevsim4 netdevsim2: set [1, 0] type 2 family 0 port 6081 - 0
[   54.254669][ T5475] netdevsim netdevsim4 netdevsim3: set [1, 0] type 2 family 0 port 6081 - 0
[   54.266608][    T8] wlan1: Created IBSS using preconfigured BSSID 50:50:50:50:50:50
[   54.269124][ T5465] device veth1_macvtap entered promiscuous mode
[   54.282033][   T34] IPv6: ADDRCONF(NETDEV_CHANGE): macvtap0: link becomes ready
[   54.283204][    T8] wlan1: Creating new IBSS network, BSSID 50:50:50:50:50:50
[   54.289936][   T34] IPv6: ADDRCONF(NETDEV_CHANGE): macsec0: link becomes ready
[   54.304479][   T34] IPv6: ADDRCONF(NETDEV_CHANGE): batadv_slave_1: link becomes ready
[   54.312761][   T34] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_batadv: link becomes ready
[   54.321337][   T34] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
[   54.329755][ T5490] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   54.340231][ T5490] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   54.350675][ T5490] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   54.361240][ T5490] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   54.371167][ T5490] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   54.381616][ T5490] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   54.391517][ T5490] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   54.402403][ T5490] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   54.414030][ T5490] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   54.424446][ T5490] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   54.434849][ T5490] batman_adv: batadv0: Interface activated: batadv_slave_1
[   54.443327][ T5461] netdevsim netdevsim7 netdevsim0: set [1, 0] type 2 family 0 port 6081 - 0
[   54.452150][ T5461] netdevsim netdevsim7 netdevsim1: set [1, 0] type 2 family 0 port 6081 - 0
[   54.460978][ T5461] netdevsim netdevsim7 netdevsim2: set [1, 0] type 2 family 0 port 6081 - 0
[   54.470317][ T5461] netdevsim netdevsim7 netdevsim3: set [1, 0] type 2 family 0 port 6081 - 0
[   54.491417][ T5538] IPv6: ADDRCONF(NETDEV_CHANGE): batadv_slave_1: link becomes ready
[   54.499682][ T5538] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_batadv: link becomes ready
[   54.510108][ T5469] device veth0_macvtap entered promiscuous mode
[   54.518614][ T5538] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_macvtap: link becomes ready
[   54.526790][ T5538] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_macvtap: link becomes ready
[   54.535601][ T5538] IPv6: ADDRCONF(NETDEV_CHANGE): macvtap0: link becomes ready
[   54.543723][ T5490] netdevsim netdevsim0 netdevsim0: set [1, 0] type 2 family 0 port 6081 - 0
[   54.552752][ T5490] netdevsim netdevsim0 netdevsim1: set [1, 0] type 2 family 0 port 6081 - 0
[   54.561828][ T5490] netdevsim netdevsim0 netdevsim2: set [1, 0] type 2 family 0 port 6081 - 0
[   54.571057][ T5490] netdevsim netdevsim0 netdevsim3: set [1, 0] type 2 family 0 port 6081 - 0
[   54.589730][   T22] wlan0: Created IBSS using preconfigured BSSID 50:50:50:50:50:50
[   54.598356][   T22] wlan0: Creating new IBSS network, BSSID 50:50:50:50:50:50
[   54.612275][ T5469] device veth1_macvtap entered promiscuous mode
[   54.623075][ T5465] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   54.633872][ T5465] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   54.650341][ T5465] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   54.660859][ T5465] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   54.671277][ T5465] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   54.681804][ T5465] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   54.692191][ T5465] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   54.702654][ T5465] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   54.712628][ T5465] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   54.723143][ T5465] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   54.733107][ T5465] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   54.743535][ T5465] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   54.754065][ T5465] batman_adv: batadv0: Interface activated: batadv_slave_0
[   54.761943][ T5499] IPv6: ADDRCONF(NETDEV_CHANGE): macsec0: link becomes ready
[   54.769574][ T5499] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   54.776981][ T5499] IPv6: ADDRCONF(NETDEV_CHANGE): batadv_slave_0: link becomes ready
[   54.785616][ T5499] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_batadv: link becomes ready
[   54.815798][ T5469] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   54.826584][ T5469] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   54.836629][ T5469] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   54.847170][ T5469] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   54.857023][ T5469] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   54.867744][ T5469] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   54.877524][ T5469] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   54.888185][ T5469] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   54.898058][ T5469] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   54.908689][ T5469] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   54.918597][ T5469] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   54.929125][ T5469] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   54.938979][ T5469] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   54.949435][ T5469] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   54.959957][ T5469] batman_adv: batadv0: Interface activated: batadv_slave_0
[   54.967994][ T5465] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   54.978824][ T5465] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   54.988723][ T5465] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   54.999367][ T5465] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   55.009228][ T5465] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   55.019996][ T5465] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   55.029872][ T5465] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   55.040440][ T5465] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   55.050327][ T5465] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   55.060803][ T5465] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   55.071092][ T5465] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   55.081718][ T5465] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   55.092088][ T5465] batman_adv: batadv0: Interface activated: batadv_slave_1
[   55.099869][ T3248] wlan1: Created IBSS using preconfigured BSSID 50:50:50:50:50:50
[   55.107959][ T3248] wlan1: Creating new IBSS network, BSSID 50:50:50:50:50:50
[   55.118108][ T5499] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
[   55.125591][ T5499] IPv6: ADDRCONF(NETDEV_CHANGE): batadv_slave_0: link becomes ready
[   55.134050][ T5499] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_batadv: link becomes ready
[   55.143212][ T5499] IPv6: ADDRCONF(NETDEV_CHANGE): batadv_slave_1: link becomes ready
[   55.151580][ T5499] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_batadv: link becomes ready
[   55.160575][ T5469] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   55.171741][ T5469] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   55.181666][ T5469] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   55.192165][ T5469] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   55.202264][ T5469] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   55.212748][ T5469] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   55.222604][ T5469] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   55.233051][ T5469] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   55.242970][ T5469] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   55.253518][ T5469] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   55.263357][ T5469] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   55.273797][ T5469] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   55.283898][ T5469] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   55.294405][ T5469] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   55.304830][ T5469] batman_adv: batadv0: Interface activated: batadv_slave_1
[   55.319255][ T5465] netdevsim netdevsim6 netdevsim0: set [1, 0] type 2 family 0 port 6081 - 0
[   55.319449][ T3248] wlan0: Created IBSS using preconfigured BSSID 50:50:50:50:50:50
[   55.332356][ T5465] netdevsim netdevsim6 netdevsim1: set [1, 0] type 2 family 0 port 6081 - 0
[   55.335731][ T3248] wlan0: Creating new IBSS network, BSSID 50:50:50:50:50:50
[   55.344539][ T5465] netdevsim netdevsim6 netdevsim2: set [1, 0] type 2 family 0 port 6081 - 0
[   55.344569][ T5465] netdevsim netdevsim6 netdevsim3: set [1, 0] type 2 family 0 port 6081 - 0
[   55.373545][ T5539] IPv6: ADDRCONF(NETDEV_CHANGE): batadv_slave_1: link becomes ready
[   55.381908][ T5539] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_batadv: link becomes ready
[   55.390347][ T5539] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   55.398247][ T5469] netdevsim netdevsim3 netdevsim0: set [1, 0] type 2 family 0 port 6081 - 0
[   55.406911][ T5469] netdevsim netdevsim3 netdevsim1: set [1, 0] type 2 family 0 port 6081 - 0
[   55.415862][ T5469] netdevsim netdevsim3 netdevsim2: set [1, 0] type 2 family 0 port 6081 - 0
[   55.424586][ T5469] netdevsim netdevsim3 netdevsim3: set [1, 0] type 2 family 0 port 6081 - 0
[   55.447866][    T8] wlan0: Created IBSS using preconfigured BSSID 50:50:50:50:50:50
[   55.455681][    T8] wlan0: Creating new IBSS network, BSSID 50:50:50:50:50:50
[   55.464052][   T22] wlan1: Created IBSS using preconfigured BSSID 50:50:50:50:50:50
[   55.464434][ T5539] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   55.474729][   T22] wlan1: Creating new IBSS network, BSSID 50:50:50:50:50:50
[   55.487784][ T5539] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
[   55.507783][ T3248] wlan1: Created IBSS using preconfigured BSSID 50:50:50:50:50:50
[   55.524169][   T22] wlan0: Created IBSS using preconfigured BSSID 50:50:50:50:50:50
[   55.524493][ T3248] wlan1: Creating new IBSS network, BSSID 50:50:50:50:50:50
[   55.538032][   T22] wlan0: Creating new IBSS network, BSSID 50:50:50:50:50:50
[   55.546926][ T5539] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
[   55.554897][ T5539] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   55.580104][   T22] wlan1: Created IBSS using preconfigured BSSID 50:50:50:50:50:50
[   55.621924][   T22] wlan1: Creating new IBSS network, BSSID 50:50:50:50:50:50
[   55.646068][   T34] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
[   55.676689][   T22] wlan0: Created IBSS using preconfigured BSSID 50:50:50:50:50:50
[   55.685682][   T22] wlan0: Creating new IBSS network, BSSID 50:50:50:50:50:50
[   55.693683][  T118] wlan0: Created IBSS using preconfigured BSSID 50:50:50:50:50:50
[   55.702580][   T17] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   55.713477][  T118] wlan0: Creating new IBSS network, BSSID 50:50:50:50:50:50
[   55.720828][   T22] wlan1: Created IBSS using preconfigured BSSID 50:50:50:50:50:50
[   55.732728][   T22] wlan1: Creating new IBSS network, BSSID 50:50:50:50:50:50
[   55.742323][   T34] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
[   55.751334][   T34] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   55.763221][   T22] wlan1: Created IBSS using preconfigured BSSID 50:50:50:50:50:50
[   55.774300][   T22] wlan1: Creating new IBSS network, BSSID 50:50:50:50:50:50
[   55.782081][   T34] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
[   55.918214][   T34] Bluetooth: hci1: command 0x0419 tx timeout
[   55.918237][ T5539] Bluetooth: hci0: command 0x0419 tx timeout
[   55.924589][   T34] Bluetooth: hci4: command 0x0419 tx timeout
[   56.078498][   T34] Bluetooth: hci2: command 0x0419 tx timeout
[   56.158143][   T34] Bluetooth: hci7: command 0x0419 tx timeout
[   56.164554][   T34] Bluetooth: hci3: command 0x0419 tx timeout
[   56.171488][   T34] Bluetooth: hci6: command 0x0419 tx timeout
[   56.177498][   T34] Bluetooth: hci5: command 0x0419 tx timeout
[   61.603149][ T5638] kmemleak: 10 new suspected memory leaks (see /sys/kernel/debug/kmemleak)
[   64.024569][ T5638] kmemleak: 6 new suspected memory leaks (see /sys/kernel/debug/kmemleak)
BUG: memory leak
unreferenced object 0xffff88811faf0300 (size 256):
  comm "syz-executor.5", pid 5599, jiffies 4294942623 (age 10.590s)
  hex dump (first 32 bytes):
    03 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  backtrace:
    [<000000004bf1d869>] kvmalloc_node+0x60/0xf0
    [<000000001415ae9f>] video_usercopy+0x13d/0xa10
    [<00000000abf58b52>] v4l2_ioctl+0x7a/0x90
    [<00000000a63b2ea1>] __x64_sys_ioctl+0xeb/0x140
    [<000000009f28a6c2>] do_syscall_64+0x2d/0x70
    [<000000006b72c39d>] entry_SYSCALL_64_after_hwframe+0x44/0xa9

BUG: memory leak
unreferenced object 0xffff88811faf0200 (size 256):
  comm "syz-executor.5", pid 5601, jiffies 4294942627 (age 10.550s)
  hex dump (first 32 bytes):
    03 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  backtrace:
    [<000000004bf1d869>] kvmalloc_node+0x60/0xf0
    [<000000001415ae9f>] video_usercopy+0x13d/0xa10
    [<00000000abf58b52>] v4l2_ioctl+0x7a/0x90
    [<00000000a63b2ea1>] __x64_sys_ioctl+0xeb/0x140
    [<000000009f28a6c2>] do_syscall_64+0x2d/0x70
    [<000000006b72c39d>] entry_SYSCALL_64_after_hwframe+0x44/0xa9

BUG: memory leak
unreferenced object 0xffff88811fa4ab00 (size 256):
  comm "syz-executor.5", pid 5603, jiffies 4294942633 (age 10.490s)
  hex dump (first 32 bytes):
    03 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  backtrace:
    [<000000004bf1d869>] kvmalloc_node+0x60/0xf0
    [<000000001415ae9f>] video_usercopy+0x13d/0xa10
    [<00000000abf58b52>] v4l2_ioctl+0x7a/0x90
    [<00000000a63b2ea1>] __x64_sys_ioctl+0xeb/0x140
    [<000000009f28a6c2>] do_syscall_64+0x2d/0x70
    [<000000006b72c39d>] entry_SYSCALL_64_after_hwframe+0x44/0xa9

BUG: memory leak
unreferenced object 0xffff88811fa40100 (size 256):
  comm "syz-executor.5", pid 5605, jiffies 4294942634 (age 10.480s)
  hex dump (first 32 bytes):
    03 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  backtrace:
    [<000000004bf1d869>] kvmalloc_node+0x60/0xf0
    [<000000001415ae9f>] video_usercopy+0x13d/0xa10
    [<00000000abf58b52>] v4l2_ioctl+0x7a/0x90
    [<00000000a63b2ea1>] __x64_sys_ioctl+0xeb/0x140
    [<000000009f28a6c2>] do_syscall_64+0x2d/0x70
    [<000000006b72c39d>] entry_SYSCALL_64_after_hwframe+0x44/0xa9

BUG: memory leak
unreferenced object 0xffff88811fa40400 (size 256):
  comm "syz-executor.5", pid 5608, jiffies 4294942638 (age 10.440s)
  hex dump (first 32 bytes):
    03 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  backtrace:
    [<000000004bf1d869>] kvmalloc_node+0x60/0xf0
    [<000000001415ae9f>] video_usercopy+0x13d/0xa10
    [<00000000abf58b52>] v4l2_ioctl+0x7a/0x90
    [<00000000a63b2ea1>] __x64_sys_ioctl+0xeb/0x140
    [<000000009f28a6c2>] do_syscall_64+0x2d/0x70
    [<000000006b72c39d>] entry_SYSCALL_64_after_hwframe+0x44/0xa9

BUG: memory leak
unreferenced object 0xffff88811faf0100 (size 256):
  comm "syz-executor.5", pid 5610, jiffies 4294942639 (age 10.430s)
  hex dump (first 32 bytes):
    03 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  backtrace:
    [<000000004bf1d869>] kvmalloc_node+0x60/0xf0
    [<000000001415ae9f>] video_usercopy+0x13d/0xa10
    [<00000000abf58b52>] v4l2_ioctl+0x7a/0x90
    [<00000000a63b2ea1>] __x64_sys_ioctl+0xeb/0x140
    [<000000009f28a6c2>] do_syscall_64+0x2d/0x70
    [<000000006b72c39d>] entry_SYSCALL_64_after_hwframe+0x44/0xa9

