Warning: Permanently added '10.128.0.37' (ED25519) to the list of known hosts.
2024/04/16 17:21:28 ignoring optional flag "sandboxArg"="0"
2024/04/16 17:21:28 parsed 1 programs
[   37.735286][ T5403] cgroup: Unknown subsys name 'net'
[   37.834462][ T5403] cgroup: Unknown subsys name 'rlimit'
[   44.949751][ T5403] kmemleak: 8 new suspected memory leaks (see /sys/kernel/debug/kmemleak)
2024/04/16 17:21:36 executed programs: 0
[   45.670037][ T5403] Adding 124996k swap on ./swap-file.  Priority:0 extents:1 across:124996k FS
[   45.874771][ T5424] IPVS: ftp: loaded support on port[0] = 21
[   45.889153][ T5434] IPVS: ftp: loaded support on port[0] = 21
[   45.898288][ T5421] IPVS: ftp: loaded support on port[0] = 21
[   45.898390][ T5430] IPVS: ftp: loaded support on port[0] = 21
[   45.914589][ T5423] IPVS: ftp: loaded support on port[0] = 21
[   45.914769][ T5432] IPVS: ftp: loaded support on port[0] = 21
[   45.933736][ T5436] IPVS: ftp: loaded support on port[0] = 21
[   45.953086][ T5427] IPVS: ftp: loaded support on port[0] = 21
[   46.021719][ T5424] chnl_net:caif_netlink_parms(): no params data found
[   46.037688][ T5423] chnl_net:caif_netlink_parms(): no params data found
[   46.083837][ T5432] chnl_net:caif_netlink_parms(): no params data found
[   46.093984][ T5421] chnl_net:caif_netlink_parms(): no params data found
[   46.103500][ T5434] chnl_net:caif_netlink_parms(): no params data found
[   46.126128][ T5430] chnl_net:caif_netlink_parms(): no params data found
[   46.136753][ T5424] bridge0: port 1(bridge_slave_0) entered blocking state
[   46.144719][ T5424] bridge0: port 1(bridge_slave_0) entered disabled state
[   46.152202][ T5424] device bridge_slave_0 entered promiscuous mode
[   46.160114][ T5424] bridge0: port 2(bridge_slave_1) entered blocking state
[   46.167200][ T5424] bridge0: port 2(bridge_slave_1) entered disabled state
[   46.174940][ T5424] device bridge_slave_1 entered promiscuous mode
[   46.183621][ T5427] chnl_net:caif_netlink_parms(): no params data found
[   46.209766][ T5424] bond0: (slave bond_slave_0): Enslaving as an active interface with an up link
[   46.221578][ T5424] bond0: (slave bond_slave_1): Enslaving as an active interface with an up link
[   46.236841][ T5432] bridge0: port 1(bridge_slave_0) entered blocking state
[   46.244272][ T5432] bridge0: port 1(bridge_slave_0) entered disabled state
[   46.251577][ T5432] device bridge_slave_0 entered promiscuous mode
[   46.259156][ T5432] bridge0: port 2(bridge_slave_1) entered blocking state
[   46.266258][ T5432] bridge0: port 2(bridge_slave_1) entered disabled state
[   46.273593][ T5432] device bridge_slave_1 entered promiscuous mode
[   46.285706][ T5423] bridge0: port 1(bridge_slave_0) entered blocking state
[   46.292839][ T5423] bridge0: port 1(bridge_slave_0) entered disabled state
[   46.300137][ T5423] device bridge_slave_0 entered promiscuous mode
[   46.308470][ T5423] bridge0: port 2(bridge_slave_1) entered blocking state
[   46.315815][ T5423] bridge0: port 2(bridge_slave_1) entered disabled state
[   46.323322][ T5423] device bridge_slave_1 entered promiscuous mode
[   46.329989][ T5424] team0: Port device team_slave_0 added
[   46.340140][ T5432] bond0: (slave bond_slave_0): Enslaving as an active interface with an up link
[   46.351102][ T5421] bridge0: port 1(bridge_slave_0) entered blocking state
[   46.358458][ T5421] bridge0: port 1(bridge_slave_0) entered disabled state
[   46.365945][ T5421] device bridge_slave_0 entered promiscuous mode
[   46.377717][ T5434] bridge0: port 1(bridge_slave_0) entered blocking state
[   46.384826][ T5434] bridge0: port 1(bridge_slave_0) entered disabled state
[   46.392313][ T5434] device bridge_slave_0 entered promiscuous mode
[   46.399968][ T5434] bridge0: port 2(bridge_slave_1) entered blocking state
[   46.407028][ T5434] bridge0: port 2(bridge_slave_1) entered disabled state
[   46.414784][ T5434] device bridge_slave_1 entered promiscuous mode
[   46.427373][ T5423] bond0: (slave bond_slave_0): Enslaving as an active interface with an up link
[   46.437090][ T5424] team0: Port device team_slave_1 added
[   46.443216][ T5432] bond0: (slave bond_slave_1): Enslaving as an active interface with an up link
[   46.455693][ T5421] bridge0: port 2(bridge_slave_1) entered blocking state
[   46.462873][ T5421] bridge0: port 2(bridge_slave_1) entered disabled state
[   46.470164][ T5421] device bridge_slave_1 entered promiscuous mode
[   46.480330][ T5434] bond0: (slave bond_slave_0): Enslaving as an active interface with an up link
[   46.490916][ T5434] bond0: (slave bond_slave_1): Enslaving as an active interface with an up link
[   46.500421][ T5423] bond0: (slave bond_slave_1): Enslaving as an active interface with an up link
[   46.513121][ T5432] team0: Port device team_slave_0 added
[   46.520736][ T5432] team0: Port device team_slave_1 added
[   46.533492][ T5436] chnl_net:caif_netlink_parms(): no params data found
[   46.544957][ T5434] team0: Port device team_slave_0 added
[   46.550694][ T5424] batman_adv: batadv0: Adding interface: batadv_slave_0
[   46.557828][ T5424] batman_adv: batadv0: The MTU of interface batadv_slave_0 is too small (1500) to handle the transport of batman-adv packets. Packets going over this interface will be fragmented on layer2 which could impact the performance. Setting the MTU to 1560 would solve the problem.
[   46.584470][ T5424] batman_adv: batadv0: Not using interface batadv_slave_0 (retrying later): interface not active
[   46.597132][ T5421] bond0: (slave bond_slave_0): Enslaving as an active interface with an up link
[   46.606312][ T5430] bridge0: port 1(bridge_slave_0) entered blocking state
[   46.613395][ T5430] bridge0: port 1(bridge_slave_0) entered disabled state
[   46.620706][ T5430] device bridge_slave_0 entered promiscuous mode
[   46.628924][ T5430] bridge0: port 2(bridge_slave_1) entered blocking state
[   46.636009][ T5430] bridge0: port 2(bridge_slave_1) entered disabled state
[   46.643619][ T5430] device bridge_slave_1 entered promiscuous mode
[   46.650175][ T5432] batman_adv: batadv0: Adding interface: batadv_slave_0
[   46.657123][ T5432] batman_adv: batadv0: The MTU of interface batadv_slave_0 is too small (1500) to handle the transport of batman-adv packets. Packets going over this interface will be fragmented on layer2 which could impact the performance. Setting the MTU to 1560 would solve the problem.
[   46.683380][ T5432] batman_adv: batadv0: Not using interface batadv_slave_0 (retrying later): interface not active
[   46.695960][ T5423] team0: Port device team_slave_0 added
[   46.704006][ T5423] team0: Port device team_slave_1 added
[   46.709797][ T5434] team0: Port device team_slave_1 added
[   46.715642][ T5424] batman_adv: batadv0: Adding interface: batadv_slave_1
[   46.722591][ T5424] batman_adv: batadv0: The MTU of interface batadv_slave_1 is too small (1500) to handle the transport of batman-adv packets. Packets going over this interface will be fragmented on layer2 which could impact the performance. Setting the MTU to 1560 would solve the problem.
[   46.749145][ T5424] batman_adv: batadv0: Not using interface batadv_slave_1 (retrying later): interface not active
[   46.760638][ T5421] bond0: (slave bond_slave_1): Enslaving as an active interface with an up link
[   46.772201][ T5427] bridge0: port 1(bridge_slave_0) entered blocking state
[   46.779230][ T5427] bridge0: port 1(bridge_slave_0) entered disabled state
[   46.786774][ T5427] device bridge_slave_0 entered promiscuous mode
[   46.795161][ T5427] bridge0: port 2(bridge_slave_1) entered blocking state
[   46.802318][ T5427] bridge0: port 2(bridge_slave_1) entered disabled state
[   46.809596][ T5427] device bridge_slave_1 entered promiscuous mode
[   46.816629][ T5432] batman_adv: batadv0: Adding interface: batadv_slave_1
[   46.823640][ T5432] batman_adv: batadv0: The MTU of interface batadv_slave_1 is too small (1500) to handle the transport of batman-adv packets. Packets going over this interface will be fragmented on layer2 which could impact the performance. Setting the MTU to 1560 would solve the problem.
[   46.849568][ T5432] batman_adv: batadv0: Not using interface batadv_slave_1 (retrying later): interface not active
[   46.866887][ T5423] batman_adv: batadv0: Adding interface: batadv_slave_0
[   46.873954][ T5423] batman_adv: batadv0: The MTU of interface batadv_slave_0 is too small (1500) to handle the transport of batman-adv packets. Packets going over this interface will be fragmented on layer2 which could impact the performance. Setting the MTU to 1560 would solve the problem.
[   46.899886][ T5423] batman_adv: batadv0: Not using interface batadv_slave_0 (retrying later): interface not active
[   46.911776][ T5423] batman_adv: batadv0: Adding interface: batadv_slave_1
[   46.918869][ T5423] batman_adv: batadv0: The MTU of interface batadv_slave_1 is too small (1500) to handle the transport of batman-adv packets. Packets going over this interface will be fragmented on layer2 which could impact the performance. Setting the MTU to 1560 would solve the problem.
[   46.944880][ T5423] batman_adv: batadv0: Not using interface batadv_slave_1 (retrying later): interface not active
[   46.959065][ T5421] team0: Port device team_slave_0 added
[   46.969865][ T5427] bond0: (slave bond_slave_0): Enslaving as an active interface with an up link
[   46.980646][ T5434] batman_adv: batadv0: Adding interface: batadv_slave_0
[   46.987718][ T5434] batman_adv: batadv0: The MTU of interface batadv_slave_0 is too small (1500) to handle the transport of batman-adv packets. Packets going over this interface will be fragmented on layer2 which could impact the performance. Setting the MTU to 1560 would solve the problem.
[   47.013747][ T5434] batman_adv: batadv0: Not using interface batadv_slave_0 (retrying later): interface not active
[   47.025929][ T5424] device hsr_slave_0 entered promiscuous mode
[   47.032229][ T5424] device hsr_slave_1 entered promiscuous mode
[   47.040353][ T5430] bond0: (slave bond_slave_0): Enslaving as an active interface with an up link
[   47.049939][ T5421] team0: Port device team_slave_1 added
[   47.062592][ T5432] device hsr_slave_0 entered promiscuous mode
[   47.068813][ T5432] device hsr_slave_1 entered promiscuous mode
[   47.075125][ T5432] debugfs: Directory 'hsr0' with parent 'hsr' already present!
[   47.082840][ T5432] Cannot create hsr debugfs directory
[   47.088748][ T5427] bond0: (slave bond_slave_1): Enslaving as an active interface with an up link
[   47.098018][ T5434] batman_adv: batadv0: Adding interface: batadv_slave_1
[   47.105096][ T5434] batman_adv: batadv0: The MTU of interface batadv_slave_1 is too small (1500) to handle the transport of batman-adv packets. Packets going over this interface will be fragmented on layer2 which could impact the performance. Setting the MTU to 1560 would solve the problem.
[   47.131238][ T5434] batman_adv: batadv0: Not using interface batadv_slave_1 (retrying later): interface not active
[   47.146575][ T5423] device hsr_slave_0 entered promiscuous mode
[   47.152868][ T5423] device hsr_slave_1 entered promiscuous mode
[   47.159034][ T5423] debugfs: Directory 'hsr0' with parent 'hsr' already present!
[   47.166638][ T5423] Cannot create hsr debugfs directory
[   47.172798][ T5430] bond0: (slave bond_slave_1): Enslaving as an active interface with an up link
[   47.185762][ T5421] batman_adv: batadv0: Adding interface: batadv_slave_0
[   47.192731][ T5421] batman_adv: batadv0: The MTU of interface batadv_slave_0 is too small (1500) to handle the transport of batman-adv packets. Packets going over this interface will be fragmented on layer2 which could impact the performance. Setting the MTU to 1560 would solve the problem.
[   47.218838][ T5421] batman_adv: batadv0: Not using interface batadv_slave_0 (retrying later): interface not active
[   47.236604][ T5427] team0: Port device team_slave_0 added
[   47.250220][ T5421] batman_adv: batadv0: Adding interface: batadv_slave_1
[   47.257482][ T5421] batman_adv: batadv0: The MTU of interface batadv_slave_1 is too small (1500) to handle the transport of batman-adv packets. Packets going over this interface will be fragmented on layer2 which could impact the performance. Setting the MTU to 1560 would solve the problem.
[   47.283733][ T5421] batman_adv: batadv0: Not using interface batadv_slave_1 (retrying later): interface not active
[   47.296279][ T5436] bridge0: port 1(bridge_slave_0) entered blocking state
[   47.303401][ T5436] bridge0: port 1(bridge_slave_0) entered disabled state
[   47.310699][ T5436] device bridge_slave_0 entered promiscuous mode
[   47.317583][ T5427] team0: Port device team_slave_1 added
[   47.329748][ T5430] team0: Port device team_slave_0 added
[   47.343411][ T5436] bridge0: port 2(bridge_slave_1) entered blocking state
[   47.350463][ T5436] bridge0: port 2(bridge_slave_1) entered disabled state
[   47.357889][ T5436] device bridge_slave_1 entered promiscuous mode
[   47.367806][ T5427] batman_adv: batadv0: Adding interface: batadv_slave_0
[   47.374883][ T5427] batman_adv: batadv0: The MTU of interface batadv_slave_0 is too small (1500) to handle the transport of batman-adv packets. Packets going over this interface will be fragmented on layer2 which could impact the performance. Setting the MTU to 1560 would solve the problem.
[   47.400914][ T5427] batman_adv: batadv0: Not using interface batadv_slave_0 (retrying later): interface not active
[   47.415927][ T5430] team0: Port device team_slave_1 added
[   47.427407][ T5430] batman_adv: batadv0: Adding interface: batadv_slave_0
[   47.434569][ T5430] batman_adv: batadv0: The MTU of interface batadv_slave_0 is too small (1500) to handle the transport of batman-adv packets. Packets going over this interface will be fragmented on layer2 which could impact the performance. Setting the MTU to 1560 would solve the problem.
[   47.460536][ T5430] batman_adv: batadv0: Not using interface batadv_slave_0 (retrying later): interface not active
[   47.475248][ T5434] device hsr_slave_0 entered promiscuous mode
[   47.481503][ T5434] device hsr_slave_1 entered promiscuous mode
[   47.488246][ T5434] debugfs: Directory 'hsr0' with parent 'hsr' already present!
[   47.495822][ T5434] Cannot create hsr debugfs directory
[   47.503393][ T5436] bond0: (slave bond_slave_0): Enslaving as an active interface with an up link
[   47.512944][ T5427] batman_adv: batadv0: Adding interface: batadv_slave_1
[   47.519889][ T5427] batman_adv: batadv0: The MTU of interface batadv_slave_1 is too small (1500) to handle the transport of batman-adv packets. Packets going over this interface will be fragmented on layer2 which could impact the performance. Setting the MTU to 1560 would solve the problem.
[   47.545829][ T5427] batman_adv: batadv0: Not using interface batadv_slave_1 (retrying later): interface not active
[   47.562691][ T5421] device hsr_slave_0 entered promiscuous mode
[   47.569065][ T5421] device hsr_slave_1 entered promiscuous mode
[   47.575551][ T5421] debugfs: Directory 'hsr0' with parent 'hsr' already present!
[   47.583423][ T5421] Cannot create hsr debugfs directory
[   47.589065][ T5430] batman_adv: batadv0: Adding interface: batadv_slave_1
[   47.596241][ T5430] batman_adv: batadv0: The MTU of interface batadv_slave_1 is too small (1500) to handle the transport of batman-adv packets. Packets going over this interface will be fragmented on layer2 which could impact the performance. Setting the MTU to 1560 would solve the problem.
[   47.622987][ T5430] batman_adv: batadv0: Not using interface batadv_slave_1 (retrying later): interface not active
[   47.639858][ T5436] bond0: (slave bond_slave_1): Enslaving as an active interface with an up link
[   47.668188][ T5427] device hsr_slave_0 entered promiscuous mode
[   47.674735][ T5427] device hsr_slave_1 entered promiscuous mode
[   47.680994][ T5427] debugfs: Directory 'hsr0' with parent 'hsr' already present!
[   47.688567][ T5427] Cannot create hsr debugfs directory
[   47.712128][ T5430] device hsr_slave_0 entered promiscuous mode
[   47.718416][ T5430] device hsr_slave_1 entered promiscuous mode
[   47.724711][ T5430] debugfs: Directory 'hsr0' with parent 'hsr' already present!
[   47.733374][ T5430] Cannot create hsr debugfs directory
[   47.740739][ T5436] team0: Port device team_slave_0 added
[   47.750098][ T5436] team0: Port device team_slave_1 added
[   47.772406][ T5432] netdevsim netdevsim2 netdevsim0: renamed from eth0
[   47.792609][ T5436] batman_adv: batadv0: Adding interface: batadv_slave_0
[   47.799564][ T5436] batman_adv: batadv0: The MTU of interface batadv_slave_0 is too small (1500) to handle the transport of batman-adv packets. Packets going over this interface will be fragmented on layer2 which could impact the performance. Setting the MTU to 1560 would solve the problem.
[   47.825654][ T5436] batman_adv: batadv0: Not using interface batadv_slave_0 (retrying later): interface not active
[   47.836475][ T5432] netdevsim netdevsim2 netdevsim1: renamed from eth1
[   47.846099][ T5424] netdevsim netdevsim1 netdevsim0: renamed from eth0
[   47.859692][ T5436] batman_adv: batadv0: Adding interface: batadv_slave_1
[   47.866706][ T5436] batman_adv: batadv0: The MTU of interface batadv_slave_1 is too small (1500) to handle the transport of batman-adv packets. Packets going over this interface will be fragmented on layer2 which could impact the performance. Setting the MTU to 1560 would solve the problem.
[   47.892648][ T5436] batman_adv: batadv0: Not using interface batadv_slave_1 (retrying later): interface not active
[   47.904143][ T5432] netdevsim netdevsim2 netdevsim2: renamed from eth2
[   47.912784][ T5432] netdevsim netdevsim2 netdevsim3: renamed from eth3
[   47.920234][ T5424] netdevsim netdevsim1 netdevsim1: renamed from eth1
[   47.922465][    T5] Bluetooth: hci3: command 0x0409 tx timeout
[   47.927326][ T5452] Bluetooth: hci7: command 0x0409 tx timeout
[   47.932984][    T5] Bluetooth: hci4: command 0x0409 tx timeout
[   47.939451][ T5452] Bluetooth: hci6: command 0x0409 tx timeout
[   47.944938][    T5] Bluetooth: hci5: command 0x0409 tx timeout
[   47.951197][ T5452] Bluetooth: hci0: command 0x0409 tx timeout
[   47.957339][    T5] Bluetooth: hci1: command 0x0409 tx timeout
[   47.968824][    T5] Bluetooth: hci2: command 0x0409 tx timeout
[   47.969855][ T5424] netdevsim netdevsim1 netdevsim2: renamed from eth2
[   47.982895][ T5424] netdevsim netdevsim1 netdevsim3: renamed from eth3
[   48.014274][ T5436] device hsr_slave_0 entered promiscuous mode
[   48.020708][ T5436] device hsr_slave_1 entered promiscuous mode
[   48.027023][ T5436] debugfs: Directory 'hsr0' with parent 'hsr' already present!
[   48.034618][ T5436] Cannot create hsr debugfs directory
[   48.048049][ T5423] netdevsim netdevsim7 netdevsim0: renamed from eth0
[   48.064436][ T5423] netdevsim netdevsim7 netdevsim1: renamed from eth1
[   48.072171][ T5434] netdevsim netdevsim0 netdevsim0: renamed from eth0
[   48.093092][ T5423] netdevsim netdevsim7 netdevsim2: renamed from eth2
[   48.100426][ T5434] netdevsim netdevsim0 netdevsim1: renamed from eth1
[   48.123285][ T5423] netdevsim netdevsim7 netdevsim3: renamed from eth3
[   48.131689][ T5421] netdevsim netdevsim5 netdevsim0: renamed from eth0
[   48.139113][ T5434] netdevsim netdevsim0 netdevsim2: renamed from eth2
[   48.159936][ T5430] netdevsim netdevsim6 netdevsim0: renamed from eth0
[   48.170732][ T5421] netdevsim netdevsim5 netdevsim1: renamed from eth1
[   48.178803][ T5421] netdevsim netdevsim5 netdevsim2: renamed from eth2
[   48.186733][ T5427] netdevsim netdevsim3 netdevsim0: renamed from eth0
[   48.196181][ T5427] netdevsim netdevsim3 netdevsim1: renamed from eth1
[   48.203810][ T5427] netdevsim netdevsim3 netdevsim2: renamed from eth2
[   48.211057][ T5434] netdevsim netdevsim0 netdevsim3: renamed from eth3
[   48.218827][ T5430] netdevsim netdevsim6 netdevsim1: renamed from eth1
[   48.226617][ T5421] netdevsim netdevsim5 netdevsim3: renamed from eth3
[   48.238162][ T5427] netdevsim netdevsim3 netdevsim3: renamed from eth3
[   48.260429][ T5424] 8021q: adding VLAN 0 to HW filter on device bond0
[   48.267282][ T5430] netdevsim netdevsim6 netdevsim2: renamed from eth2
[   48.275118][ T5430] netdevsim netdevsim6 netdevsim3: renamed from eth3
[   48.283760][ T5432] 8021q: adding VLAN 0 to HW filter on device bond0
[   48.296221][ T5436] netdevsim netdevsim4 netdevsim0: renamed from eth0
[   48.311459][ T5436] netdevsim netdevsim4 netdevsim1: renamed from eth1
[   48.319583][ T5498] IPv6: ADDRCONF(NETDEV_CHANGE): veth1: link becomes ready
[   48.327465][ T5498] IPv6: ADDRCONF(NETDEV_CHANGE): veth0: link becomes ready
[   48.337790][ T5424] 8021q: adding VLAN 0 to HW filter on device team0
[   48.345809][ T5432] 8021q: adding VLAN 0 to HW filter on device team0
[   48.362241][ T5436] netdevsim netdevsim4 netdevsim2: renamed from eth2
[   48.369939][ T5436] netdevsim netdevsim4 netdevsim3: renamed from eth3
[   48.377593][ T5498] IPv6: ADDRCONF(NETDEV_CHANGE): veth1: link becomes ready
[   48.385644][ T5498] IPv6: ADDRCONF(NETDEV_CHANGE): veth0: link becomes ready
[   48.398165][ T5423] 8021q: adding VLAN 0 to HW filter on device bond0
[   48.426623][ T5498] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_bridge: link becomes ready
[   48.435423][ T5498] IPv6: ADDRCONF(NETDEV_CHANGE): bridge_slave_0: link becomes ready
[   48.444120][ T5498] bridge0: port 1(bridge_slave_0) entered blocking state
[   48.451163][ T5498] bridge0: port 1(bridge_slave_0) entered forwarding state
[   48.458778][ T5498] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_bridge: link becomes ready
[   48.467398][ T5498] IPv6: ADDRCONF(NETDEV_CHANGE): bridge_slave_1: link becomes ready
[   48.475923][ T5498] bridge0: port 2(bridge_slave_1) entered blocking state
[   48.483056][ T5498] bridge0: port 2(bridge_slave_1) entered forwarding state
[   48.491142][ T5498] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_bond: link becomes ready
[   48.499616][ T5498] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_bridge: link becomes ready
[   48.508208][ T5498] IPv6: ADDRCONF(NETDEV_CHANGE): bridge_slave_0: link becomes ready
[   48.516861][ T5498] bridge0: port 1(bridge_slave_0) entered blocking state
[   48.523993][ T5498] bridge0: port 1(bridge_slave_0) entered forwarding state
[   48.531701][ T5498] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_bridge: link becomes ready
[   48.541093][ T5498] IPv6: ADDRCONF(NETDEV_CHANGE): bridge_slave_1: link becomes ready
[   48.549806][ T5498] bridge0: port 2(bridge_slave_1) entered blocking state
[   48.556953][ T5498] bridge0: port 2(bridge_slave_1) entered forwarding state
[   48.565387][ T5498] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_bond: link becomes ready
[   48.574134][ T5498] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_bond: link becomes ready
[   48.588080][ T5421] 8021q: adding VLAN 0 to HW filter on device bond0
[   48.601422][ T5432] hsr0: Slave A (hsr_slave_0) is not up; please bring it up to get a fully working HSR network
[   48.612500][ T5432] hsr0: Slave B (hsr_slave_1) is not up; please bring it up to get a fully working HSR network
[   48.636400][ T5434] 8021q: adding VLAN 0 to HW filter on device bond0
[   48.643572][ T5501] IPv6: ADDRCONF(NETDEV_CHANGE): bridge0: link becomes ready
[   48.651366][ T5501] IPv6: ADDRCONF(NETDEV_CHANGE): bridge0: link becomes ready
[   48.659667][ T5501] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_team: link becomes ready
[   48.668095][ T5501] IPv6: ADDRCONF(NETDEV_CHANGE): team_slave_0: link becomes ready
[   48.676455][ T5501] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_team: link becomes ready
[   48.685124][ T5501] IPv6: ADDRCONF(NETDEV_CHANGE): team_slave_1: link becomes ready
[   48.693334][ T5501] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_hsr: link becomes ready
[   48.701294][ T5501] IPv6: ADDRCONF(NETDEV_CHANGE): hsr_slave_0: link becomes ready
[   48.709492][ T5501] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_hsr: link becomes ready
[   48.717792][ T5501] IPv6: ADDRCONF(NETDEV_CHANGE): hsr_slave_1: link becomes ready
[   48.725880][ T5501] IPv6: ADDRCONF(NETDEV_CHANGE): veth1: link becomes ready
[   48.733480][ T5501] IPv6: ADDRCONF(NETDEV_CHANGE): veth0: link becomes ready
[   48.740849][ T5501] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_bond: link becomes ready
[   48.749413][ T5501] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_team: link becomes ready
[   48.757918][ T5501] IPv6: ADDRCONF(NETDEV_CHANGE): team_slave_0: link becomes ready
[   48.766112][ T5501] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_team: link becomes ready
[   48.774372][ T5501] IPv6: ADDRCONF(NETDEV_CHANGE): team_slave_1: link becomes ready
[   48.783382][ T5421] 8021q: adding VLAN 0 to HW filter on device team0
[   48.799718][ T5427] 8021q: adding VLAN 0 to HW filter on device bond0
[   48.817009][ T5434] 8021q: adding VLAN 0 to HW filter on device team0
[   48.825384][ T5501] IPv6: ADDRCONF(NETDEV_CHANGE): team0: link becomes ready
[   48.833081][ T5501] IPv6: ADDRCONF(NETDEV_CHANGE): hsr0: link becomes ready
[   48.840479][ T5501] IPv6: ADDRCONF(NETDEV_CHANGE): team0: link becomes ready
[   48.848355][ T5501] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_bridge: link becomes ready
[   48.856787][ T5501] IPv6: ADDRCONF(NETDEV_CHANGE): bridge_slave_0: link becomes ready
[   48.865084][ T5501] bridge0: port 1(bridge_slave_0) entered blocking state
[   48.872122][ T5501] bridge0: port 1(bridge_slave_0) entered forwarding state
[   48.879636][ T5501] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_bridge: link becomes ready
[   48.888326][ T5501] IPv6: ADDRCONF(NETDEV_CHANGE): bridge_slave_1: link becomes ready
[   48.896642][ T5501] bridge0: port 2(bridge_slave_1) entered blocking state
[   48.903675][ T5501] bridge0: port 2(bridge_slave_1) entered forwarding state
[   48.911104][ T5501] IPv6: ADDRCONF(NETDEV_CHANGE): veth1: link becomes ready
[   48.918839][ T5501] IPv6: ADDRCONF(NETDEV_CHANGE): veth0: link becomes ready
[   48.926559][ T5501] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_bond: link becomes ready
[   48.935308][ T5501] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_hsr: link becomes ready
[   48.943357][ T5501] IPv6: ADDRCONF(NETDEV_CHANGE): hsr_slave_0: link becomes ready
[   48.951359][ T5501] IPv6: ADDRCONF(NETDEV_CHANGE): veth1: link becomes ready
[   48.959176][ T5501] IPv6: ADDRCONF(NETDEV_CHANGE): veth0: link becomes ready
[   48.966858][ T5501] IPv6: ADDRCONF(NETDEV_CHANGE): veth1: link becomes ready
[   48.974273][ T5501] IPv6: ADDRCONF(NETDEV_CHANGE): veth0: link becomes ready
[   48.981896][ T5501] IPv6: ADDRCONF(NETDEV_CHANGE): bridge0: link becomes ready
[   48.990212][ T5423] 8021q: adding VLAN 0 to HW filter on device team0
[   49.001076][ T5424] hsr0: Slave B (hsr_slave_1) is not up; please bring it up to get a fully working HSR network
[   49.011934][ T5424] IPv6: ADDRCONF(NETDEV_CHANGE): hsr0: link becomes ready
[   49.027164][ T5502] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_bridge: link becomes ready
[   49.035631][ T5502] IPv6: ADDRCONF(NETDEV_CHANGE): bridge_slave_0: link becomes ready
[   49.044482][ T5502] bridge0: port 1(bridge_slave_0) entered blocking state
[   49.051607][ T5502] bridge0: port 1(bridge_slave_0) entered forwarding state
[   49.060968][ T5502] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_hsr: link becomes ready
[   49.069203][ T5502] IPv6: ADDRCONF(NETDEV_CHANGE): hsr_slave_1: link becomes ready
[   49.077326][ T5502] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_bridge: link becomes ready
[   49.085772][ T5502] IPv6: ADDRCONF(NETDEV_CHANGE): bridge_slave_0: link becomes ready
[   49.094086][ T5502] bridge0: port 1(bridge_slave_0) entered blocking state
[   49.101113][ T5502] bridge0: port 1(bridge_slave_0) entered forwarding state
[   49.108626][ T5502] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_bond: link becomes ready
[   49.116990][ T5502] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_bridge: link becomes ready
[   49.125770][ T5502] IPv6: ADDRCONF(NETDEV_CHANGE): bridge_slave_1: link becomes ready
[   49.134051][ T5502] bridge0: port 2(bridge_slave_1) entered blocking state
[   49.141081][ T5502] bridge0: port 2(bridge_slave_1) entered forwarding state
[   49.156014][ T5423] hsr0: Slave A (hsr_slave_0) is not up; please bring it up to get a fully working HSR network
[   49.166996][ T5423] hsr0: Slave B (hsr_slave_1) is not up; please bring it up to get a fully working HSR network
[   49.178560][ T5427] 8021q: adding VLAN 0 to HW filter on device team0
[   49.195132][ T5502] IPv6: ADDRCONF(NETDEV_CHANGE): bridge0: link becomes ready
[   49.203470][ T5502] IPv6: ADDRCONF(NETDEV_CHANGE): bridge0: link becomes ready
[   49.211086][ T5502] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_bridge: link becomes ready
[   49.220333][ T5502] IPv6: ADDRCONF(NETDEV_CHANGE): bridge_slave_1: link becomes ready
[   49.228728][ T5502] bridge0: port 2(bridge_slave_1) entered blocking state
[   49.235755][ T5502] bridge0: port 2(bridge_slave_1) entered forwarding state
[   49.243617][ T5502] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_bond: link becomes ready
[   49.251804][ T5502] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_bond: link becomes ready
[   49.260108][ T5502] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_team: link becomes ready
[   49.268335][ T5502] IPv6: ADDRCONF(NETDEV_CHANGE): team_slave_0: link becomes ready
[   49.276584][ T5502] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_team: link becomes ready
[   49.284937][ T5502] IPv6: ADDRCONF(NETDEV_CHANGE): team_slave_1: link becomes ready
[   49.293109][ T5502] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_hsr: link becomes ready
[   49.301183][ T5502] IPv6: ADDRCONF(NETDEV_CHANGE): hsr_slave_0: link becomes ready
[   49.309669][ T5502] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_hsr: link becomes ready
[   49.317961][ T5502] IPv6: ADDRCONF(NETDEV_CHANGE): hsr_slave_1: link becomes ready
[   49.326036][ T5502] IPv6: ADDRCONF(NETDEV_CHANGE): vxcan1: link becomes ready
[   49.333522][ T5502] IPv6: ADDRCONF(NETDEV_CHANGE): vxcan0: link becomes ready
[   49.340850][ T5502] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_bridge: link becomes ready
[   49.349398][ T5502] IPv6: ADDRCONF(NETDEV_CHANGE): bridge_slave_0: link becomes ready
[   49.357740][ T5502] bridge0: port 1(bridge_slave_0) entered blocking state
[   49.364817][ T5502] bridge0: port 1(bridge_slave_0) entered forwarding state
[   49.372647][ T5502] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_bridge: link becomes ready
[   49.381007][ T5502] IPv6: ADDRCONF(NETDEV_CHANGE): bridge_slave_1: link becomes ready
[   49.389318][ T5502] bridge0: port 2(bridge_slave_1) entered blocking state
[   49.397246][ T5502] bridge0: port 2(bridge_slave_1) entered forwarding state
[   49.404909][ T5502] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_team: link becomes ready
[   49.413592][ T5502] IPv6: ADDRCONF(NETDEV_CHANGE): team_slave_0: link becomes ready
[   49.421782][ T5502] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_bond: link becomes ready
[   49.430339][ T5502] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_bond: link becomes ready
[   49.438665][ T5502] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_bond: link becomes ready
[   49.447277][ T5502] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_team: link becomes ready
[   49.455577][ T5502] IPv6: ADDRCONF(NETDEV_CHANGE): team_slave_0: link becomes ready
[   49.465636][ T5432] 8021q: adding VLAN 0 to HW filter on device batadv0
[   49.474131][ T5430] 8021q: adding VLAN 0 to HW filter on device bond0
[   49.487599][ T5436] 8021q: adding VLAN 0 to HW filter on device bond0
[   49.495804][ T5501] IPv6: ADDRCONF(NETDEV_CHANGE): bond0: link becomes ready
[   49.504081][ T5501] IPv6: ADDRCONF(NETDEV_CHANGE): team0: link becomes ready
[   49.511513][ T5501] IPv6: ADDRCONF(NETDEV_CHANGE): hsr0: link becomes ready
[   49.524629][ T5430] 8021q: adding VLAN 0 to HW filter on device team0
[   49.537045][ T5427] hsr0: Slave A (hsr_slave_0) is not up; please bring it up to get a fully working HSR network
[   49.547854][ T5427] hsr0: Slave B (hsr_slave_1) is not up; please bring it up to get a fully working HSR network
[   49.564908][ T5434] hsr0: Slave A (hsr_slave_0) is not up; please bring it up to get a fully working HSR network
[   49.575624][ T5434] hsr0: Slave B (hsr_slave_1) is not up; please bring it up to get a fully working HSR network
[   49.590936][ T5498] IPv6: ADDRCONF(NETDEV_CHANGE): bridge0: link becomes ready
[   49.598647][ T5498] IPv6: ADDRCONF(NETDEV_CHANGE): team0: link becomes ready
[   49.606575][ T5498] IPv6: ADDRCONF(NETDEV_CHANGE): team0: link becomes ready
[   49.615512][ T5498] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_team: link becomes ready
[   49.623885][ T5498] IPv6: ADDRCONF(NETDEV_CHANGE): team_slave_1: link becomes ready
[   49.632542][ T5498] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_bond: link becomes ready
[   49.640876][ T5498] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_team: link becomes ready
[   49.649367][ T5498] IPv6: ADDRCONF(NETDEV_CHANGE): team_slave_0: link becomes ready
[   49.657702][ T5498] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_hsr: link becomes ready
[   49.666057][ T5498] IPv6: ADDRCONF(NETDEV_CHANGE): hsr_slave_0: link becomes ready
[   49.674272][ T5498] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_hsr: link becomes ready
[   49.682694][ T5498] IPv6: ADDRCONF(NETDEV_CHANGE): hsr_slave_1: link becomes ready
[   49.690617][ T5498] IPv6: ADDRCONF(NETDEV_CHANGE): veth1: link becomes ready
[   49.698318][ T5498] IPv6: ADDRCONF(NETDEV_CHANGE): veth0: link becomes ready
[   49.706217][ T5498] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_team: link becomes ready
[   49.714476][ T5498] IPv6: ADDRCONF(NETDEV_CHANGE): team_slave_1: link becomes ready
[   49.723631][ T5498] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_team: link becomes ready
[   49.732659][ T5498] IPv6: ADDRCONF(NETDEV_CHANGE): team_slave_1: link becomes ready
[   49.740796][ T5498] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_hsr: link becomes ready
[   49.749213][ T5498] IPv6: ADDRCONF(NETDEV_CHANGE): hsr_slave_0: link becomes ready
[   49.757479][ T5498] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_hsr: link becomes ready
[   49.766119][ T5498] IPv6: ADDRCONF(NETDEV_CHANGE): hsr_slave_1: link becomes ready
[   49.774285][ T5498] IPv6: ADDRCONF(NETDEV_CHANGE): veth1: link becomes ready
[   49.781678][ T5498] IPv6: ADDRCONF(NETDEV_CHANGE): veth0: link becomes ready
[   49.789352][ T5498] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_hsr: link becomes ready
[   49.797615][ T5498] IPv6: ADDRCONF(NETDEV_CHANGE): hsr_slave_0: link becomes ready
[   49.806019][ T5498] IPv6: ADDRCONF(NETDEV_CHANGE): vxcan1: link becomes ready
[   49.813726][ T5498] IPv6: ADDRCONF(NETDEV_CHANGE): vxcan0: link becomes ready
[   49.821053][ T5498] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_hsr: link becomes ready
[   49.829700][ T5498] IPv6: ADDRCONF(NETDEV_CHANGE): hsr_slave_1: link becomes ready
[   49.838371][ T5498] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_virt_wifi: link becomes ready
[   49.847237][ T5498] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_virt_wifi: link becomes ready
[   49.856957][ T5421] IPv6: ADDRCONF(NETDEV_CHANGE): hsr0: link becomes ready
[   49.867703][ T5423] 8021q: adding VLAN 0 to HW filter on device batadv0
[   49.876019][ T5424] 8021q: adding VLAN 0 to HW filter on device batadv0
[   49.886324][ T5436] 8021q: adding VLAN 0 to HW filter on device team0
[   49.899953][ T5493] IPv6: ADDRCONF(NETDEV_CHANGE): team0: link becomes ready
[   49.907951][ T5493] IPv6: ADDRCONF(NETDEV_CHANGE): hsr0: link becomes ready
[   49.915746][ T5493] IPv6: ADDRCONF(NETDEV_CHANGE): hsr0: link becomes ready
[   49.924133][ T5493] IPv6: ADDRCONF(NETDEV_CHANGE): vxcan1: link becomes ready
[   49.931779][ T5493] IPv6: ADDRCONF(NETDEV_CHANGE): vxcan0: link becomes ready
[   49.939476][ T5493] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_bridge: link becomes ready
[   49.948138][ T5493] IPv6: ADDRCONF(NETDEV_CHANGE): bridge_slave_0: link becomes ready
[   49.956488][ T5493] bridge0: port 1(bridge_slave_0) entered blocking state
[   49.963772][ T5493] bridge0: port 1(bridge_slave_0) entered forwarding state
[   49.981907][ T5430] hsr0: Slave A (hsr_slave_0) is not up; please bring it up to get a fully working HSR network
[   49.992604][ T5430] hsr0: Slave B (hsr_slave_1) is not up; please bring it up to get a fully working HSR network
[   50.002208][ T5497] Bluetooth: hci2: command 0x041b tx timeout
[   50.003326][   T19] Bluetooth: hci1: command 0x041b tx timeout
[   50.015111][ T5432] device veth0_vlan entered promiscuous mode
[   50.015678][   T19] Bluetooth: hci0: command 0x041b tx timeout
[   50.025161][ T5432] device veth1_vlan entered promiscuous mode
[   50.031782][   T19] Bluetooth: hci5: command 0x041b tx timeout
[   50.044880][ T5501] IPv6: ADDRCONF(NETDEV_CHANGE): bridge0: link becomes ready
[   50.049182][   T19] Bluetooth: hci6: command 0x041b tx timeout
[   50.053690][ T5501] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_bridge: link becomes ready
[   50.068064][   T19] Bluetooth: hci4: command 0x041b tx timeout
[   50.074018][ T5501] IPv6: ADDRCONF(NETDEV_CHANGE): bridge_slave_1: link becomes ready
[   50.074507][   T19] Bluetooth: hci7: command 0x041b tx timeout
[   50.086807][ T5501] bridge0: port 2(bridge_slave_1) entered blocking state
[   50.093878][   T19] Bluetooth: hci3: command 0x041b tx timeout
[   50.095315][ T5501] bridge0: port 2(bridge_slave_1) entered forwarding state
[   50.109273][ T5501] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_bond: link becomes ready
[   50.117955][ T5501] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_bond: link becomes ready
[   50.126206][ T5501] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_team: link becomes ready
[   50.134363][ T5501] IPv6: ADDRCONF(NETDEV_CHANGE): team_slave_0: link becomes ready
[   50.142647][ T5501] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_team: link becomes ready
[   50.150783][ T5501] IPv6: ADDRCONF(NETDEV_CHANGE): team_slave_1: link becomes ready
[   50.159357][ T5501] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_hsr: link becomes ready
[   50.167683][ T5501] IPv6: ADDRCONF(NETDEV_CHANGE): hsr_slave_0: link becomes ready
[   50.175844][ T5501] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_virt_wifi: link becomes ready
[   50.184518][ T5501] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_virt_wifi: link becomes ready
[   50.193094][ T5501] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_hsr: link becomes ready
[   50.201195][ T5501] IPv6: ADDRCONF(NETDEV_CHANGE): hsr_slave_1: link becomes ready
[   50.209444][ T5501] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_vlan: link becomes ready
[   50.217485][ T5501] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_vlan: link becomes ready
[   50.225575][ T5501] IPv6: ADDRCONF(NETDEV_CHANGE): macvlan0: link becomes ready
[   50.233474][ T5501] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_bridge: link becomes ready
[   50.242000][ T5501] IPv6: ADDRCONF(NETDEV_CHANGE): bridge_slave_0: link becomes ready
[   50.250502][ T5501] bridge0: port 1(bridge_slave_0) entered blocking state
[   50.257651][ T5501] bridge0: port 1(bridge_slave_0) entered forwarding state
[   50.265349][ T5501] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_bridge: link becomes ready
[   50.273728][ T5501] IPv6: ADDRCONF(NETDEV_CHANGE): bridge_slave_1: link becomes ready
[   50.281823][ T5501] bridge0: port 2(bridge_slave_1) entered blocking state
[   50.288846][ T5501] bridge0: port 2(bridge_slave_1) entered forwarding state
[   50.296423][ T5501] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_vlan: link becomes ready
[   50.305346][ T5501] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_vlan: link becomes ready
[   50.316178][ T5501] IPv6: ADDRCONF(NETDEV_CHANGE): team0: link becomes ready
[   50.323975][ T5501] IPv6: ADDRCONF(NETDEV_CHANGE): hsr0: link becomes ready
[   50.331381][ T5501] IPv6: ADDRCONF(NETDEV_CHANGE): vlan0: link becomes ready
[   50.338971][ T5501] IPv6: ADDRCONF(NETDEV_CHANGE): vlan1: link becomes ready
[   50.346522][ T5501] IPv6: ADDRCONF(NETDEV_CHANGE): macvlan1: link becomes ready
[   50.354588][ T5501] IPv6: ADDRCONF(NETDEV_CHANGE): bridge0: link becomes ready
[   50.362541][ T5501] IPv6: ADDRCONF(NETDEV_CHANGE): vlan0: link becomes ready
[   50.370189][ T5501] IPv6: ADDRCONF(NETDEV_CHANGE): vlan1: link becomes ready
[   50.382680][ T5424] device veth0_vlan entered promiscuous mode
[   50.398116][ T5436] hsr0: Slave A (hsr_slave_0) is not up; please bring it up to get a fully working HSR network
[   50.409882][ T5436] hsr0: Slave B (hsr_slave_1) is not up; please bring it up to get a fully working HSR network
[   50.430419][ T5493] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_virt_wifi: link becomes ready
[   50.440042][ T5493] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_virt_wifi: link becomes ready
[   50.448865][ T5493] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_bond: link becomes ready
[   50.458180][ T5493] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_bond: link becomes ready
[   50.467044][ T5493] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_team: link becomes ready
[   50.475477][ T5493] IPv6: ADDRCONF(NETDEV_CHANGE): team_slave_0: link becomes ready
[   50.484137][ T5493] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_team: link becomes ready
[   50.492546][ T5493] IPv6: ADDRCONF(NETDEV_CHANGE): team_slave_1: link becomes ready
[   50.500834][ T5493] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_hsr: link becomes ready
[   50.509277][ T5493] IPv6: ADDRCONF(NETDEV_CHANGE): hsr_slave_0: link becomes ready
[   50.517506][ T5493] IPv6: ADDRCONF(NETDEV_CHANGE): vxcan1: link becomes ready
[   50.525171][ T5493] IPv6: ADDRCONF(NETDEV_CHANGE): vxcan0: link becomes ready
[   50.532695][ T5493] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_hsr: link becomes ready
[   50.540816][ T5493] IPv6: ADDRCONF(NETDEV_CHANGE): hsr_slave_1: link becomes ready
[   50.549747][ T5421] 8021q: adding VLAN 0 to HW filter on device batadv0
[   50.559562][ T5427] 8021q: adding VLAN 0 to HW filter on device batadv0
[   50.569687][ T5424] device veth1_vlan entered promiscuous mode
[   50.580330][ T5434] 8021q: adding VLAN 0 to HW filter on device batadv0
[   50.596871][ T5432] device veth0_macvtap entered promiscuous mode
[   50.604557][ T5497] IPv6: ADDRCONF(NETDEV_CHANGE): macvlan0: link becomes ready
[   50.612877][ T5497] IPv6: ADDRCONF(NETDEV_CHANGE): team0: link becomes ready
[   50.620568][ T5497] IPv6: ADDRCONF(NETDEV_CHANGE): hsr0: link becomes ready
[   50.628421][ T5497] IPv6: ADDRCONF(NETDEV_CHANGE): vxcan1: link becomes ready
[   50.636531][ T5497] IPv6: ADDRCONF(NETDEV_CHANGE): vxcan0: link becomes ready
[   50.644577][ T5497] IPv6: ADDRCONF(NETDEV_CHANGE): vxcan1: link becomes ready
[   50.652555][ T5497] IPv6: ADDRCONF(NETDEV_CHANGE): vxcan0: link becomes ready
[   50.660036][ T5497] IPv6: ADDRCONF(NETDEV_CHANGE): vxcan1: link becomes ready
[   50.667633][ T5497] IPv6: ADDRCONF(NETDEV_CHANGE): vxcan0: link becomes ready
[   50.675197][ T5497] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_macvtap: link becomes ready
[   50.683601][ T5497] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_macvtap: link becomes ready
[   50.703506][ T5424] device veth0_macvtap entered promiscuous mode
[   50.715227][ T5430] 8021q: adding VLAN 0 to HW filter on device batadv0
[   50.723852][ T5432] device veth1_macvtap entered promiscuous mode
[   50.732269][ T5497] IPv6: ADDRCONF(NETDEV_CHANGE): macvtap0: link becomes ready
[   50.740487][ T5497] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_virt_wifi: link becomes ready
[   50.750046][ T5497] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_virt_wifi: link becomes ready
[   50.758518][ T5497] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_macvtap: link becomes ready
[   50.767171][ T5497] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_macvtap: link becomes ready
[   50.775820][ T5497] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_vlan: link becomes ready
[   50.783995][ T5497] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_vlan: link becomes ready
[   50.792870][ T5497] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_vlan: link becomes ready
[   50.801514][ T5497] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_vlan: link becomes ready
[   50.810689][ T5427] device veth0_vlan entered promiscuous mode
[   50.817390][ T5423] device veth0_vlan entered promiscuous mode
[   50.826491][ T5424] device veth1_macvtap entered promiscuous mode
[   50.838184][ T5432] batman_adv: batadv0: Interface activated: batadv_slave_0
[   50.846051][ T5497] IPv6: ADDRCONF(NETDEV_CHANGE): macvtap0: link becomes ready
[   50.856123][ T5497] IPv6: ADDRCONF(NETDEV_CHANGE): macsec0: link becomes ready
[   50.864422][ T5497] IPv6: ADDRCONF(NETDEV_CHANGE): vlan0: link becomes ready
[   50.872930][ T5497] IPv6: ADDRCONF(NETDEV_CHANGE): vlan1: link becomes ready
[   50.880391][ T5497] IPv6: ADDRCONF(NETDEV_CHANGE): vlan0: link becomes ready
[   50.888387][ T5497] IPv6: ADDRCONF(NETDEV_CHANGE): vlan1: link becomes ready
[   50.896201][ T5497] IPv6: ADDRCONF(NETDEV_CHANGE): vxcan1: link becomes ready
[   50.903855][ T5497] IPv6: ADDRCONF(NETDEV_CHANGE): vxcan0: link becomes ready
[   50.911347][ T5497] IPv6: ADDRCONF(NETDEV_CHANGE): batadv_slave_0: link becomes ready
[   50.919765][ T5497] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_batadv: link becomes ready
[   50.930766][ T5427] device veth1_vlan entered promiscuous mode
[   50.944691][ T5423] device veth1_vlan entered promiscuous mode
[   50.961569][ T5427] device veth0_macvtap entered promiscuous mode
[   50.970425][ T5436] 8021q: adding VLAN 0 to HW filter on device batadv0
[   50.983790][ T5432] batman_adv: batadv0: Interface activated: batadv_slave_1
[   50.994528][ T5432] netdevsim netdevsim2 netdevsim0: set [1, 0] type 2 family 0 port 6081 - 0
[   51.003327][ T5432] netdevsim netdevsim2 netdevsim1: set [1, 0] type 2 family 0 port 6081 - 0
[   51.012233][ T5432] netdevsim netdevsim2 netdevsim2: set [1, 0] type 2 family 0 port 6081 - 0
[   51.021156][ T5432] netdevsim netdevsim2 netdevsim3: set [1, 0] type 2 family 0 port 6081 - 0
[   51.034782][ T5501] IPv6: ADDRCONF(NETDEV_CHANGE): macvlan0: link becomes ready
[   51.043121][ T5501] IPv6: ADDRCONF(NETDEV_CHANGE): macvlan1: link becomes ready
[   51.050795][ T5501] IPv6: ADDRCONF(NETDEV_CHANGE): macvlan0: link becomes ready
[   51.058730][ T5501] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_virt_wifi: link becomes ready
[   51.067368][ T5501] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_virt_wifi: link becomes ready
[   51.075860][ T5501] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_macvtap: link becomes ready
[   51.084836][ T5501] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_macvtap: link becomes ready
[   51.093273][ T5501] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_virt_wifi: link becomes ready
[   51.101563][ T5501] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_virt_wifi: link becomes ready
[   51.110371][ T5501] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_virt_wifi: link becomes ready
[   51.119104][ T5501] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_virt_wifi: link becomes ready
[   51.128355][ T5501] IPv6: ADDRCONF(NETDEV_CHANGE): batadv_slave_1: link becomes ready
[   51.136675][ T5501] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_batadv: link becomes ready
[   51.147399][ T5427] device veth1_macvtap entered promiscuous mode
[   51.156579][ T5424] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   51.167730][ T5424] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   51.178322][ T5424] batman_adv: batadv0: Interface activated: batadv_slave_0
[   51.190823][ T5434] device veth0_vlan entered promiscuous mode
[   51.211341][ T5423] device veth0_macvtap entered promiscuous mode
[   51.218467][ T5501] IPv6: ADDRCONF(NETDEV_CHANGE): macvlan1: link becomes ready
[   51.227189][ T5501] IPv6: ADDRCONF(NETDEV_CHANGE): macvtap0: link becomes ready
[   51.235993][ T5501] IPv6: ADDRCONF(NETDEV_CHANGE): macsec0: link becomes ready
[   51.243958][ T5501] IPv6: ADDRCONF(NETDEV_CHANGE): batadv_slave_0: link becomes ready
[   51.252535][ T5501] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_batadv: link becomes ready
[   51.260842][ T5501] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_vlan: link becomes ready
[   51.269136][ T5501] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_vlan: link becomes ready
[   51.277483][ T5501] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_vlan: link becomes ready
[   51.285930][ T5501] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_vlan: link becomes ready
[   51.296238][ T5501] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_macvtap: link becomes ready
[   51.304680][ T5501] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_macvtap: link becomes ready
[   51.315014][ T5424] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   51.326685][ T5424] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   51.337154][ T5424] batman_adv: batadv0: Interface activated: batadv_slave_1
[   51.345137][ T5430] device veth0_vlan entered promiscuous mode
[   51.354975][ T5430] device veth1_vlan entered promiscuous mode
[   51.364003][ T5423] device veth1_macvtap entered promiscuous mode
[   51.373283][ T5427] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   51.384245][ T5427] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   51.394100][ T5427] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   51.404728][ T5427] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   51.415230][ T5427] batman_adv: batadv0: Interface activated: batadv_slave_0
[   51.423863][ T5493] IPv6: ADDRCONF(NETDEV_CHANGE): vlan0: link becomes ready
[   51.431679][ T5493] IPv6: ADDRCONF(NETDEV_CHANGE): vlan1: link becomes ready
[   51.439393][ T5493] IPv6: ADDRCONF(NETDEV_CHANGE): vlan0: link becomes ready
[   51.447614][ T5493] IPv6: ADDRCONF(NETDEV_CHANGE): vlan1: link becomes ready
[   51.455560][ T5493] IPv6: ADDRCONF(NETDEV_CHANGE): macvlan0: link becomes ready
[   51.463679][ T5493] IPv6: ADDRCONF(NETDEV_CHANGE): macvtap0: link becomes ready
[   51.471572][ T5493] IPv6: ADDRCONF(NETDEV_CHANGE): macsec0: link becomes ready
[   51.479593][ T5493] IPv6: ADDRCONF(NETDEV_CHANGE): batadv_slave_1: link becomes ready
[   51.489193][ T5493] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_batadv: link becomes ready
[   51.498245][ T5493] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_vlan: link becomes ready
[   51.506907][ T5493] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_vlan: link becomes ready
[   51.515929][ T5493] IPv6: ADDRCONF(NETDEV_CHANGE): batadv_slave_0: link becomes ready
[   51.524685][ T5493] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_batadv: link becomes ready
[   51.533878][ T5493] IPv6: ADDRCONF(NETDEV_CHANGE): vlan0: link becomes ready
[   51.541450][ T5493] IPv6: ADDRCONF(NETDEV_CHANGE): vlan1: link becomes ready
[   51.551084][ T5424] netdevsim netdevsim1 netdevsim0: set [1, 0] type 2 family 0 port 6081 - 0
[   51.560243][ T5424] netdevsim netdevsim1 netdevsim1: set [1, 0] type 2 family 0 port 6081 - 0
[   51.569554][ T5424] netdevsim netdevsim1 netdevsim2: set [1, 0] type 2 family 0 port 6081 - 0
[   51.579863][ T5424] netdevsim netdevsim1 netdevsim3: set [1, 0] type 2 family 0 port 6081 - 0
[   51.590117][ T5421] device veth0_vlan entered promiscuous mode
[   51.602867][ T5434] device veth1_vlan entered promiscuous mode
[   51.612982][ T5501] IPv6: ADDRCONF(NETDEV_CHANGE): macvlan0: link becomes ready
[   51.620873][ T5501] IPv6: ADDRCONF(NETDEV_CHANGE): macvlan1: link becomes ready
[   51.634279][ T5421] device veth1_vlan entered promiscuous mode
[   51.641066][ T5427] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   51.651979][ T5427] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   51.663039][ T5427] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   51.673855][ T5427] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   51.684913][ T5427] batman_adv: batadv0: Interface activated: batadv_slave_1
[   51.696731][ T5427] netdevsim netdevsim3 netdevsim0: set [1, 0] type 2 family 0 port 6081 - 0
[   51.705554][ T5427] netdevsim netdevsim3 netdevsim1: set [1, 0] type 2 family 0 port 6081 - 0
[   51.714297][ T5427] netdevsim netdevsim3 netdevsim2: set [1, 0] type 2 family 0 port 6081 - 0
[   51.723566][ T5427] netdevsim netdevsim3 netdevsim3: set [1, 0] type 2 family 0 port 6081 - 0
[   51.737135][ T5430] device veth0_macvtap entered promiscuous mode
[   51.752886][ T5423] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   51.763826][ T5423] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   51.774071][ T5423] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   51.784767][ T5423] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   51.794785][ T5423] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   51.805597][ T5423] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   51.816191][ T5423] batman_adv: batadv0: Interface activated: batadv_slave_0
[   51.824820][ T5527] IPv6: ADDRCONF(NETDEV_CHANGE): batadv_slave_1: link becomes ready
[   51.833182][ T5527] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_batadv: link becomes ready
[   51.841468][ T5527] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_macvtap: link becomes ready
[   51.850594][ T5527] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_macvtap: link becomes ready
[   51.858997][ T5527] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_virt_wifi: link becomes ready
[   51.867574][ T5527] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_virt_wifi: link becomes ready
[   51.876356][ T5527] IPv6: ADDRCONF(NETDEV_CHANGE): batadv_slave_0: link becomes ready
[   51.884805][ T5527] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_batadv: link becomes ready
[   51.893364][ T5527] IPv6: ADDRCONF(NETDEV_CHANGE): macvtap0: link becomes ready
[   51.909054][   T27] wlan0: Created IBSS using preconfigured BSSID 50:50:50:50:50:50
[   51.917287][   T27] wlan0: Creating new IBSS network, BSSID 50:50:50:50:50:50
[   51.923485][ T5430] device veth1_macvtap entered promiscuous mode
[   51.943209][ T5423] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   51.953912][ T5423] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   51.963866][ T5423] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   51.974429][ T5423] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   51.984437][ T5423] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   51.995421][ T5423] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   52.005916][ T5423] batman_adv: batadv0: Interface activated: batadv_slave_1
[   52.014272][  T174] wlan1: Created IBSS using preconfigured BSSID 50:50:50:50:50:50
[   52.024182][ T5436] device veth0_vlan entered promiscuous mode
[   52.024521][  T174] wlan1: Creating new IBSS network, BSSID 50:50:50:50:50:50
[   52.036198][ T5430] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   52.047925][ T5430] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   52.057955][ T5430] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   52.068447][ T5430] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   52.078392][ T5430] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   52.082374][ T5527] Bluetooth: hci2: command 0x040f tx timeout
[   52.089144][ T5141] Bluetooth: hci4: command 0x040f tx timeout
[   52.096073][ T5430] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   52.101268][ T5141] Bluetooth: hci6: command 0x040f tx timeout
[   52.111108][ T5430] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   52.117197][ T5141] Bluetooth: hci5: command 0x040f tx timeout
[   52.129659][ T5430] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   52.133767][ T5141] Bluetooth: hci0: command 0x040f tx timeout
[   52.144865][ T5430] batman_adv: batadv0: Interface activated: batadv_slave_0
[   52.149638][ T5141] Bluetooth: hci1: command 0x040f tx timeout
[   52.157412][ T5434] device veth0_macvtap entered promiscuous mode
[   52.163726][ T5141] Bluetooth: hci3: command 0x040f tx timeout
[   52.170675][ T5498] IPv6: ADDRCONF(NETDEV_CHANGE): macsec0: link becomes ready
[   52.175131][ T5141] Bluetooth: hci7: command 0x040f tx timeout
[   52.183434][ T5498] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   52.196090][ T5498] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
[   52.203663][ T5498] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_vlan: link becomes ready
[   52.211609][ T5498] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_vlan: link becomes ready
[   52.219893][ T5498] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_macvtap: link becomes ready
[   52.228247][ T5498] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_macvtap: link becomes ready
[   52.236625][ T5498] IPv6: ADDRCONF(NETDEV_CHANGE): batadv_slave_1: link becomes ready
[   52.245452][ T5498] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_batadv: link becomes ready
[   52.254039][ T5498] IPv6: ADDRCONF(NETDEV_CHANGE): batadv_slave_0: link becomes ready
[   52.262493][ T5498] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_batadv: link becomes ready
[   52.281960][ T5421] device veth0_macvtap entered promiscuous mode
[   52.289196][  T174] wlan0: Created IBSS using preconfigured BSSID 50:50:50:50:50:50
[   52.298108][ T5423] netdevsim netdevsim7 netdevsim0: set [1, 0] type 2 family 0 port 6081 - 0
[   52.302295][  T174] wlan0: Creating new IBSS network, BSSID 50:50:50:50:50:50
[   52.306903][ T5423] netdevsim netdevsim7 netdevsim1: set [1, 0] type 2 family 0 port 6081 - 0
[   52.323108][ T5423] netdevsim netdevsim7 netdevsim2: set [1, 0] type 2 family 0 port 6081 - 0
[   52.331812][ T5423] netdevsim netdevsim7 netdevsim3: set [1, 0] type 2 family 0 port 6081 - 0
[   52.345249][ T5430] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   52.355980][ T5430] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   52.366063][ T5430] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   52.376586][ T5430] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   52.386722][ T5430] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   52.397339][ T5430] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   52.407482][ T5430] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   52.418152][ T5430] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   52.428827][ T5430] batman_adv: batadv0: Interface activated: batadv_slave_1
[   52.437005][ T5498] IPv6: ADDRCONF(NETDEV_CHANGE): vlan0: link becomes ready
[   52.437360][   T27] wlan1: Created IBSS using preconfigured BSSID 50:50:50:50:50:50
[   52.445068][ T5498] IPv6: ADDRCONF(NETDEV_CHANGE): vlan1: link becomes ready
[   52.452420][   T27] wlan1: Creating new IBSS network, BSSID 50:50:50:50:50:50
[   52.460158][ T5498] IPv6: ADDRCONF(NETDEV_CHANGE): macvtap0: link becomes ready
[   52.475279][ T5498] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   52.483397][ T5498] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_macvtap: link becomes ready
[   52.492216][ T5498] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_macvtap: link becomes ready
[   52.501199][ T5498] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
[   52.508704][ T5498] IPv6: ADDRCONF(NETDEV_CHANGE): batadv_slave_1: link becomes ready
[   52.517068][ T5498] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_batadv: link becomes ready
[   52.525763][ T5498] IPv6: ADDRCONF(NETDEV_CHANGE): macvtap0: link becomes ready
[   52.535084][ T5421] device veth1_macvtap entered promiscuous mode
[   52.542792][ T5436] device veth1_vlan entered promiscuous mode
[   52.553381][ T5434] device veth1_macvtap entered promiscuous mode
[   52.562544][ T5430] netdevsim netdevsim6 netdevsim0: set [1, 0] type 2 family 0 port 6081 - 0
[   52.571247][ T5430] netdevsim netdevsim6 netdevsim1: set [1, 0] type 2 family 0 port 6081 - 0
[   52.580252][ T5430] netdevsim netdevsim6 netdevsim2: set [1, 0] type 2 family 0 port 6081 - 0
[   52.589605][ T5430] netdevsim netdevsim6 netdevsim3: set [1, 0] type 2 family 0 port 6081 - 0
[   52.606701][ T5432] cgroup: cgroup: disabling cgroup2 socket matching due to net_prio or net_cls activation
[   52.619689][   T24] wlan0: Created IBSS using preconfigured BSSID 50:50:50:50:50:50
[   52.619852][ T5436] device veth0_macvtap entered promiscuous mode
[   52.633970][   T24] wlan0: Creating new IBSS network, BSSID 50:50:50:50:50:50
[   52.639420][ T5434] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   52.653423][ T5434] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   52.663581][ T5434] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   52.674502][ T5434] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   52.684473][ T5434] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   52.695385][ T5434] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   52.705248][ T5434] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   52.715715][ T5434] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   52.725990][ T5434] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   52.736912][ T5434] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   52.748343][ T5434] batman_adv: batadv0: Interface activated: batadv_slave_0
[   52.771754][ T5421] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   52.783569][ T5421] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   52.798008][ T5421] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   52.809089][ T5421] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   52.819024][ T5421] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   52.829509][ T5421] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   52.839601][ T5421] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   52.850200][ T5421] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   52.860174][ T5421] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   52.871233][ T5421] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   52.881620][ T5421] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   52.892517][ T5421] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   52.902903][ T5421] batman_adv: batadv0: Interface activated: batadv_slave_0
[   52.911205][ T5496] IPv6: ADDRCONF(NETDEV_CHANGE): macvlan0: link becomes ready
[   52.919255][ T5496] IPv6: ADDRCONF(NETDEV_CHANGE): macvlan1: link becomes ready
[   52.927556][ T5496] IPv6: ADDRCONF(NETDEV_CHANGE): macsec0: link becomes ready
[   52.935541][ T5496] IPv6: ADDRCONF(NETDEV_CHANGE): macsec0: link becomes ready
[   52.943443][ T5496] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   52.950917][ T5496] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_macvtap: link becomes ready
[   52.959188][ T5496] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_macvtap: link becomes ready
[   52.967720][ T5496] IPv6: ADDRCONF(NETDEV_CHANGE): batadv_slave_0: link becomes ready
[   52.976181][ T5496] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_batadv: link becomes ready
[   52.984619][ T5496] IPv6: ADDRCONF(NETDEV_CHANGE): batadv_slave_0: link becomes ready
[   52.993016][ T5496] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_batadv: link becomes ready
[   53.007526][ T5436] device veth1_macvtap entered promiscuous mode
[   53.012166][   T27] wlan1: Created IBSS using preconfigured BSSID 50:50:50:50:50:50
[   53.020889][ T5436] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   53.021817][   T27] wlan1: Creating new IBSS network, BSSID 50:50:50:50:50:50
[   53.032874][ T5436] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   53.049775][ T5497] usb 3-1: new high-speed USB device number 2 using dummy_hcd
[   53.057385][ T5436] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   53.067913][ T5436] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   53.078168][ T5436] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   53.088974][ T5436] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   53.099428][ T5436] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   53.110032][ T5436] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   53.120731][ T5436] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   53.131747][ T5436] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   53.141968][ T5436] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   53.152589][ T5436] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   53.162402][ T5436] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3e) already exists on: batadv_slave_0
[   53.172890][ T5436] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   53.186720][ T5436] batman_adv: batadv0: Interface activated: batadv_slave_0
[   53.194686][ T5434] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   53.208975][ T5434] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   53.219065][ T5434] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   53.229689][ T5434] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   53.239809][ T5434] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   53.250473][ T5434] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   53.260549][ T5434] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   53.271452][ T5434] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   53.281454][ T5434] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   53.292125][ T5434] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   53.302952][ T5434] batman_adv: batadv0: Interface activated: batadv_slave_1
[   53.315519][ T5496] IPv6: ADDRCONF(NETDEV_CHANGE): macvtap0: link becomes ready
[   53.323532][ T5496] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
[   53.331440][ T5496] IPv6: ADDRCONF(NETDEV_CHANGE): batadv_slave_0: link becomes ready
[   53.340537][ T5496] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_batadv: link becomes ready
[   53.349094][ T5496] IPv6: ADDRCONF(NETDEV_CHANGE): batadv_slave_1: link becomes ready
[   53.357558][ T5496] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_batadv: link becomes ready
[   53.367701][ T5436] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   53.378851][ T5436] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   53.388771][ T5436] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   53.399618][ T5436] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   53.409600][ T5436] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   53.420397][ T5497] usb 3-1: config 0 interface 0 has no altsetting 0
[   53.422051][ T5436] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   53.427021][ T5497] usb 3-1: New USB device found, idVendor=10fd, idProduct=1513, bcdDevice=10.94
[   53.437058][ T5436] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   53.446906][ T5497] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[   53.456528][ T5436] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   53.465746][ T5497] usb 3-1: config 0 descriptor??
[   53.478358][ T5436] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   53.479828][ T5498] usb 2-1: new high-speed USB device number 2 using dummy_hcd
[   53.490670][ T5436] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   53.507377][ T5436] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   53.517801][ T5436] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   53.528457][ T5436] batman_adv: batadv0: Interface activated: batadv_slave_1
[   53.532873][ T5497] dvb-usb: found a 'MSI DIGI VOX mini II DVB-T USB2.0' in warm state.
[   53.545471][ T5497] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
[   53.562244][ T5421] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   53.573038][ T5497] dvbdev: DVB: registering new adapter (MSI DIGI VOX mini II DVB-T USB2.0)
[   53.581999][ T5421] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   53.592148][ T5497] usb 3-1: media controller created
[   53.599332][ T5497] dvbdev: dvb_create_media_entity: media entity 'dvb-demux' registered.
[   53.607955][ T5421] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   53.620231][ T5421] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   53.631133][ T5421] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   53.641600][ T5497] DVB: Unable to find symbol tda10046_attach()
[   53.647965][ T5497] dvb-usb: no frontend was attached by 'MSI DIGI VOX mini II DVB-T USB2.0'
[   53.652049][ T5421] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   53.657231][ T5497] dvb-usb: MSI DIGI VOX mini II DVB-T USB2.0 successfully initialized and connected.
[   53.667263][ T5421] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   53.686981][ T5421] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   53.696842][ T5421] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   53.707585][ T5421] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   53.718026][ T5421] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   53.728789][ T5421] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   53.739350][ T5421] batman_adv: The newly added mac address (aa:aa:aa:aa:aa:3f) already exists on: batadv_slave_1
[   53.750598][ T5421] batman_adv: It is strongly recommended to keep mac addresses unique to avoid problems!
[   53.760986][ T5497] dvb_usb_m920x: probe of 3-1:0.0 failed with error -71
[   53.761406][ T5421] batman_adv: batadv0: Interface activated: batadv_slave_1
[   53.776147][ T5497] usb 3-1: USB disconnect, device number 2
[   53.776849][ T5434] netdevsim netdevsim0 netdevsim0: set [1, 0] type 2 family 0 port 6081 - 0
[   53.802053][ T5434] netdevsim netdevsim0 netdevsim1: set [1, 0] type 2 family 0 port 6081 - 0
[   53.810770][ T5434] netdevsim netdevsim0 netdevsim2: set [1, 0] type 2 family 0 port 6081 - 0
[   53.820103][ T5434] netdevsim netdevsim0 netdevsim3: set [1, 0] type 2 family 0 port 6081 - 0
[   53.829976][ T5496] IPv6: ADDRCONF(NETDEV_CHANGE): batadv_slave_1: link becomes ready
[   53.838329][ T5496] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_batadv: link becomes ready
[   53.847503][ T5496] IPv6: ADDRCONF(NETDEV_CHANGE): batadv_slave_1: link becomes ready
[   53.856458][ T5496] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_batadv: link becomes ready
[   53.862120][ T5498] usb 2-1: config 0 interface 0 has no altsetting 0
[   53.866383][ T5436] netdevsim netdevsim4 netdevsim0: set [1, 0] type 2 family 0 port 6081 - 0
[   53.871928][ T5498] usb 2-1: New USB device found, idVendor=10fd, idProduct=1513, bcdDevice=10.94
[   53.879979][ T5436] netdevsim netdevsim4 netdevsim1: set [1, 0] type 2 family 0 port 6081 - 0
[   53.890009][ T5498] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[   53.897577][ T5436] netdevsim netdevsim4 netdevsim2: set [1, 0] type 2 family 0 port 6081 - 0
[   53.913296][ T5498] usb 2-1: config 0 descriptor??
[   53.919598][ T5436] netdevsim netdevsim4 netdevsim3: set [1, 0] type 2 family 0 port 6081 - 0
[   53.952822][ T5498] dvb-usb: found a 'MSI DIGI VOX mini II DVB-T USB2.0' in warm state.
[   53.963206][ T5421] netdevsim netdevsim5 netdevsim0: set [1, 0] type 2 family 0 port 6081 - 0
[   53.972883][ T5498] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
[   53.986229][ T5421] netdevsim netdevsim5 netdevsim1: set [1, 0] type 2 family 0 port 6081 - 0
[   53.997552][ T5421] netdevsim netdevsim5 netdevsim2: set [1, 0] type 2 family 0 port 6081 - 0
[   54.002622][ T5498] dvbdev: DVB: registering new adapter (MSI DIGI VOX mini II DVB-T USB2.0)
[   54.006518][ T5421] netdevsim netdevsim5 netdevsim3: set [1, 0] type 2 family 0 port 6081 - 0
[   54.015822][ T5498] usb 2-1: media controller created
[   54.034057][ T5498] dvbdev: dvb_create_media_entity: media entity 'dvb-demux' registered.
[   54.065779][  T174] wlan0: Created IBSS using preconfigured BSSID 50:50:50:50:50:50
[   54.081869][ T5498] DVB: Unable to find symbol tda10046_attach()
[   54.081879][  T174] wlan0: Creating new IBSS network, BSSID 50:50:50:50:50:50
[   54.099366][ T5498] dvb-usb: no frontend was attached by 'MSI DIGI VOX mini II DVB-T USB2.0'
[   54.108685][ T5498] dvb-usb: MSI DIGI VOX mini II DVB-T USB2.0 successfully initialized and connected.
[   54.125049][ T5499] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   54.158439][   T27] wlan0: Created IBSS using preconfigured BSSID 50:50:50:50:50:50
[   54.171530][ T5495] Bluetooth: hci0: command 0x0419 tx timeout
[   54.172248][ T5498] dvb_usb_m920x: probe of 2-1:0.0 failed with error -71
[   54.180779][ T5495] Bluetooth: hci5: command 0x0419 tx timeout
[   54.191656][ T5498] usb 2-1: USB disconnect, device number 2
[   54.192256][   T27] wlan0: Creating new IBSS network, BSSID 50:50:50:50:50:50
2024/04/16 17:21:44 executed programs: 8
[   54.212846][  T174] wlan1: Created IBSS using preconfigured BSSID 50:50:50:50:50:50
[   54.220747][  T174] wlan1: Creating new IBSS network, BSSID 50:50:50:50:50:50
[   54.229314][ T3042] wlan0: Created IBSS using preconfigured BSSID 50:50:50:50:50:50
[   54.242670][ T5495] Bluetooth: hci6: command 0x0419 tx timeout
[   54.250577][   T24] wlan0: Created IBSS using preconfigured BSSID 50:50:50:50:50:50
[   54.270152][ T3042] wlan0: Creating new IBSS network, BSSID 50:50:50:50:50:50
[   54.273592][    T8] wlan0: Created IBSS using preconfigured BSSID 50:50:50:50:50:50
[   54.291413][ T5577] wlan1: Created IBSS using preconfigured BSSID 50:50:50:50:50:50
[   54.294543][   T24] wlan0: Creating new IBSS network, BSSID 50:50:50:50:50:50
[   54.302670][ T5580] wlan1: Created IBSS using preconfigured BSSID 50:50:50:50:50:50
[   54.307165][   T36] usb 4-1: new high-speed USB device number 2 using dummy_hcd
[   54.317260][    T8] wlan0: Creating new IBSS network, BSSID 50:50:50:50:50:50
[   54.325879][ T5495] Bluetooth: hci4: command 0x0419 tx timeout
[   54.330120][ T5583] wlan1: Created IBSS using preconfigured BSSID 50:50:50:50:50:50
[   54.341299][ T3042] wlan1: Created IBSS using preconfigured BSSID 50:50:50:50:50:50
[   54.350028][ T5577] wlan1: Creating new IBSS network, BSSID 50:50:50:50:50:50
[   54.352377][ T3042] wlan1: Creating new IBSS network, BSSID 50:50:50:50:50:50
[   54.364302][ T5580] wlan1: Creating new IBSS network, BSSID 50:50:50:50:50:50
[   54.367158][ T5495] Bluetooth: hci2: command 0x0419 tx timeout
[   54.378984][ T5583] wlan1: Creating new IBSS network, BSSID 50:50:50:50:50:50
[   54.382244][ T5499] Bluetooth: hci7: command 0x0419 tx timeout
[   54.393908][ T5499] Bluetooth: hci3: command 0x0419 tx timeout
[   54.400477][ T5499] Bluetooth: hci1: command 0x0419 tx timeout
[   54.407793][ T5495] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   54.415976][ T5495] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
[   54.423693][ T5495] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   54.431296][ T5495] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   54.439139][ T5495] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   54.446779][ T5495] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
[   54.454335][ T5495] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
[   54.461810][ T5495] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
[   54.469735][ T5495] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
[   54.682063][ T5499] usb 3-1: new high-speed USB device number 3 using dummy_hcd
[   54.752104][   T36] usb 4-1: config 0 interface 0 has no altsetting 0
[   54.758962][   T36] usb 4-1: New USB device found, idVendor=10fd, idProduct=1513, bcdDevice=10.94
[   54.768798][   T36] usb 4-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[   54.778046][   T36] usb 4-1: config 0 descriptor??
[   54.785918][ T5495] usb 5-1: new high-speed USB device number 2 using dummy_hcd
[   54.792540][ T5498] usb 6-1: new high-speed USB device number 2 using dummy_hcd
[   54.802357][ T5500] usb 8-1: new high-speed USB device number 2 using dummy_hcd
[   54.812175][ T5576] usb 7-1: new high-speed USB device number 2 using dummy_hcd
[   54.822106][ T5141] usb 1-1: new high-speed USB device number 2 using dummy_hcd
[   54.843121][   T36] dvb-usb: found a 'MSI DIGI VOX mini II DVB-T USB2.0' in warm state.
[   54.851765][   T36] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
[   54.872481][   T36] dvbdev: DVB: registering new adapter (MSI DIGI VOX mini II DVB-T USB2.0)
[   54.881643][   T36] usb 4-1: media controller created
[   54.889335][   T36] dvbdev: dvb_create_media_entity: media entity 'dvb-demux' registered.
[   54.903514][   T36] DVB: Unable to find symbol tda10046_attach()
[   54.909770][   T36] dvb-usb: no frontend was attached by 'MSI DIGI VOX mini II DVB-T USB2.0'
[   54.918789][   T36] dvb-usb: MSI DIGI VOX mini II DVB-T USB2.0 successfully initialized and connected.
[   54.962893][ T5502] usb 2-1: new high-speed USB device number 3 using dummy_hcd
[   55.052119][   T36] dvb_usb_m920x: probe of 4-1:0.0 failed with error -71
[   55.066697][   T36] usb 4-1: USB disconnect, device number 2
[   55.072826][ T5499] usb 3-1: config 0 interface 0 has no altsetting 0
[   55.079424][ T5499] usb 3-1: New USB device found, idVendor=10fd, idProduct=1513, bcdDevice=10.94
[   55.101117][ T5499] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[   55.110372][ T5499] usb 3-1: config 0 descriptor??
[   55.152128][ T5498] usb 6-1: config 0 interface 0 has no altsetting 0
[   55.154038][ T5499] dvb-usb: found a 'MSI DIGI VOX mini II DVB-T USB2.0' in warm state.
[   55.159233][ T5498] usb 6-1: New USB device found, idVendor=10fd, idProduct=1513, bcdDevice=10.94
[   55.167599][ T5499] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
[   55.176382][ T5576] usb 7-1: config 0 interface 0 has no altsetting 0
[   55.186220][ T5495] usb 5-1: config 0 interface 0 has no altsetting 0
[   55.192645][ T5498] usb 6-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[   55.198709][ T5500] usb 8-1: config 0 interface 0 has no altsetting 0
[   55.207376][ T5576] usb 7-1: New USB device found, idVendor=10fd, idProduct=1513, bcdDevice=10.94
[   55.214594][ T5495] usb 5-1: New USB device found, idVendor=10fd, idProduct=1513, bcdDevice=10.94
[   55.222885][ T5576] usb 7-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[   55.231590][ T5495] usb 5-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[   55.239738][ T5498] usb 6-1: config 0 descriptor??
[   55.247595][ T5141] usb 1-1: config 0 interface 0 has no altsetting 0
[   55.259158][ T5500] usb 8-1: New USB device found, idVendor=10fd, idProduct=1513, bcdDevice=10.94
[   55.261300][ T5576] usb 7-1: config 0 descriptor??
[   55.272249][ T5141] usb 1-1: New USB device found, idVendor=10fd, idProduct=1513, bcdDevice=10.94
[   55.282492][ T5499] dvbdev: DVB: registering new adapter (MSI DIGI VOX mini II DVB-T USB2.0)
[   55.291881][ T5500] usb 8-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[   55.293253][ T5498] dvb-usb: found a 'MSI DIGI VOX mini II DVB-T USB2.0' in warm state.
[   55.301274][ T5499] usb 3-1: media controller created
[   55.312989][ T5576] dvb-usb: found a 'MSI DIGI VOX mini II DVB-T USB2.0' in warm state.
[   55.315300][ T5141] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[   55.322988][ T5498] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
[   55.334681][ T5499] dvbdev: dvb_create_media_entity: media entity 'dvb-demux' registered.
[   55.340637][ T5502] usb 2-1: config 0 interface 0 has no altsetting 0
[   55.348850][ T5141] usb 1-1: config 0 descriptor??
[   55.356001][ T5576] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
[   55.360461][ T5500] usb 8-1: config 0 descriptor??
[   55.370088][ T5502] usb 2-1: New USB device found, idVendor=10fd, idProduct=1513, bcdDevice=10.94
[   55.374893][ T5495] usb 5-1: config 0 descriptor??
[   55.397617][ T5502] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[   55.402707][ T5499] DVB: Unable to find symbol tda10046_attach()
[   55.410483][ T5502] usb 2-1: config 0 descriptor??
[   55.415406][ T5499] dvb-usb: no frontend was attached by 'MSI DIGI VOX mini II DVB-T USB2.0'
[   55.418116][ T5576] dvbdev: DVB: registering new adapter (MSI DIGI VOX mini II DVB-T USB2.0)
[   55.430425][ T5499] dvb-usb: MSI DIGI VOX mini II DVB-T USB2.0 successfully initialized and connected.
[   55.436015][ T5498] dvbdev: DVB: registering new adapter (MSI DIGI VOX mini II DVB-T USB2.0)
[   55.445606][ T5495] dvb-usb: found a 'MSI DIGI VOX mini II DVB-T USB2.0' in warm state.
[   55.455129][ T5576] usb 7-1: media controller created
[   55.462720][ T5141] dvb-usb: found a 'MSI DIGI VOX mini II DVB-T USB2.0' in warm state.
[   55.467491][ T5498] usb 6-1: media controller created
[   55.476044][ T5500] dvb-usb: found a 'MSI DIGI VOX mini II DVB-T USB2.0' in warm state.
[   55.482128][ T5502] dvb-usb: found a 'MSI DIGI VOX mini II DVB-T USB2.0' in warm state.
[   55.491482][ T5495] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
[   55.503352][ T5576] dvbdev: dvb_create_media_entity: media entity 'dvb-demux' registered.
[   55.507122][ T5141] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
[   55.523163][ T5498] dvbdev: dvb_create_media_entity: media entity 'dvb-demux' registered.
[   55.524915][ T5500] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
[   55.538227][ T5502] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
[   55.542222][ T5499] dvb_usb_m920x: probe of 3-1:0.0 failed with error -71
[   55.558845][ T5499] usb 3-1: USB disconnect, device number 3
[   55.562220][ T5502] dvbdev: DVB: registering new adapter (MSI DIGI VOX mini II DVB-T USB2.0)
[   55.584167][ T5141] dvbdev: DVB: registering new adapter (MSI DIGI VOX mini II DVB-T USB2.0)
[   55.584538][ T5502] usb 2-1: media controller created
[   55.601810][ T5576] DVB: Unable to find symbol tda10046_attach()
[   55.611828][ T5495] dvbdev: DVB: registering new adapter (MSI DIGI VOX mini II DVB-T USB2.0)
[   55.616618][ T5498] DVB: Unable to find symbol tda10046_attach()
[   55.621074][ T5141] usb 1-1: media controller created
[   55.626971][ T5576] dvb-usb: no frontend was attached by 'MSI DIGI VOX mini II DVB-T USB2.0'
[   55.636168][ T5500] dvbdev: DVB: registering new adapter (MSI DIGI VOX mini II DVB-T USB2.0)
[   55.649370][ T5495] usb 5-1: media controller created
[   55.652559][ T5498] dvb-usb: no frontend was attached by 'MSI DIGI VOX mini II DVB-T USB2.0'
[   55.664509][ T5141] dvbdev: dvb_create_media_entity: media entity 'dvb-demux' registered.
[   55.669437][ T5576] dvb-usb: MSI DIGI VOX mini II DVB-T USB2.0 successfully initialized and connected.
[   55.673026][ T5500] usb 8-1: media controller created
[   55.683349][ T5498] dvb-usb: MSI DIGI VOX mini II DVB-T USB2.0 successfully initialized and connected.
[   55.704615][ T5495] dvbdev: dvb_create_media_entity: media entity 'dvb-demux' registered.
[   55.721477][ T5502] dvbdev: dvb_create_media_entity: media entity 'dvb-demux' registered.
[   55.730167][ T5576] dvb_usb_m920x: probe of 7-1:0.0 failed with error -71
[   55.738367][ T5498] dvb_usb_m920x: probe of 6-1:0.0 failed with error -71
[   55.745988][ T5576] usb 7-1: USB disconnect, device number 2
[   55.756401][ T5500] dvbdev: dvb_create_media_entity: media entity 'dvb-demux' registered.
[   55.760067][ T5498] usb 6-1: USB disconnect, device number 2
[   55.816002][ T5141] DVB: Unable to find symbol tda10046_attach()
[   55.826937][ T5502] DVB: Unable to find symbol tda10046_attach()
[   55.828621][ T5500] DVB: Unable to find symbol tda10046_attach()
[   55.833823][ T5502] dvb-usb: no frontend was attached by 'MSI DIGI VOX mini II DVB-T USB2.0'
[   55.839507][ T5495] DVB: Unable to find symbol tda10046_attach()
[   55.848670][ T5502] dvb-usb: MSI DIGI VOX mini II DVB-T USB2.0 successfully initialized and connected.
[   55.854892][ T5500] dvb-usb: no frontend was attached by 'MSI DIGI VOX mini II DVB-T USB2.0'
[   55.873279][ T5141] dvb-usb: no frontend was attached by 'MSI DIGI VOX mini II DVB-T USB2.0'
[   55.881862][ T5141] dvb-usb: MSI DIGI VOX mini II DVB-T USB2.0 successfully initialized and connected.
[   55.882081][ T5502] dvb_usb_m920x: probe of 2-1:0.0 failed with error -71
[   55.891373][ T5495] dvb-usb: no frontend was attached by 'MSI DIGI VOX mini II DVB-T USB2.0'
[   55.908463][ T5500] dvb-usb: MSI DIGI VOX mini II DVB-T USB2.0 successfully initialized and connected.
[   55.918586][ T5495] dvb-usb: MSI DIGI VOX mini II DVB-T USB2.0 successfully initialized and connected.
[   55.932113][ T5141] dvb_usb_m920x: probe of 1-1:0.0 failed with error -71
[   55.933465][ T5502] usb 2-1: USB disconnect, device number 3
[   55.952108][ T5500] dvb_usb_m920x: probe of 8-1:0.0 failed with error -71
[   55.959537][ T5495] dvb_usb_m920x: probe of 5-1:0.0 failed with error -71
[   55.969072][ T5141] usb 1-1: USB disconnect, device number 2
[   55.976143][ T5500] usb 8-1: USB disconnect, device number 2
[   55.992648][ T5495] usb 5-1: USB disconnect, device number 2
2024/04/16 17:21:52 executed programs: 17
[   62.452532][ T5495] usb 2-1: new high-speed USB device number 4 using dummy_hcd
[   62.460147][ T5141] usb 3-1: new high-speed USB device number 4 using dummy_hcd
[   62.467830][ T5499] usb 6-1: new high-speed USB device number 3 using dummy_hcd
[   62.472062][ T5502] usb 4-1: new high-speed USB device number 3 using dummy_hcd
[   62.482969][    T5] usb 8-1: new high-speed USB device number 3 using dummy_hcd
[   62.490460][ T3819] usb 1-1: new high-speed USB device number 3 using dummy_hcd
[   62.498033][ T5527] usb 7-1: new high-speed USB device number 3 using dummy_hcd
[   62.505572][ T5501] usb 5-1: new high-speed USB device number 3 using dummy_hcd
[   62.832470][ T5499] usb 6-1: config 0 interface 0 has no altsetting 0
[   62.839141][ T5141] usb 3-1: config 0 interface 0 has no altsetting 0
[   62.845808][ T5495] usb 2-1: config 0 interface 0 has no altsetting 0
[   62.852442][ T5141] usb 3-1: New USB device found, idVendor=10fd, idProduct=1513, bcdDevice=10.94
[   62.861513][ T5499] usb 6-1: New USB device found, idVendor=10fd, idProduct=1513, bcdDevice=10.94
[   62.870863][ T5495] usb 2-1: New USB device found, idVendor=10fd, idProduct=1513, bcdDevice=10.94
[   62.879991][ T5141] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[   62.888086][ T5495] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[   62.896146][ T5499] usb 6-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[   62.902558][    T5] usb 8-1: config 0 interface 0 has no altsetting 0
[   62.910862][    T5] usb 8-1: New USB device found, idVendor=10fd, idProduct=1513, bcdDevice=10.94
[   62.911752][ T5499] usb 6-1: config 0 descriptor??
[   62.922509][ T3819] usb 1-1: config 0 interface 0 has no altsetting 0
[   62.925239][ T5495] usb 2-1: config 0 descriptor??
[   62.935331][ T5501] usb 5-1: config 0 interface 0 has no altsetting 0
[   62.936828][ T5141] usb 3-1: config 0 descriptor??
[   62.946853][ T5527] usb 7-1: config 0 interface 0 has no altsetting 0
[   62.954848][ T3819] usb 1-1: New USB device found, idVendor=10fd, idProduct=1513, bcdDevice=10.94
[   62.964293][ T5502] usb 4-1: config 0 interface 0 has no altsetting 0
[   62.973929][ T5501] usb 5-1: New USB device found, idVendor=10fd, idProduct=1513, bcdDevice=10.94
[   62.982837][ T5141] dvb-usb: found a 'MSI DIGI VOX mini II DVB-T USB2.0' in warm state.
[   62.983165][ T5527] usb 7-1: New USB device found, idVendor=10fd, idProduct=1513, bcdDevice=10.94
[   62.992479][ T5495] dvb-usb: found a 'MSI DIGI VOX mini II DVB-T USB2.0' in warm state.
[   63.000756][    T5] usb 8-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[   63.009366][ T5499] dvb-usb: found a 'MSI DIGI VOX mini II DVB-T USB2.0' in warm state.
[   63.016580][ T3819] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[   63.025020][ T5141] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
[   63.033087][ T5502] usb 4-1: New USB device found, idVendor=10fd, idProduct=1513, bcdDevice=10.94
[   63.051318][ T5501] usb 5-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[   63.051397][ T5495] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
[   63.059885][ T5527] usb 7-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[   63.068858][ T5141] dvbdev: DVB: registering new adapter (MSI DIGI VOX mini II DVB-T USB2.0)
[   63.077742][ T5501] usb 5-1: config 0 descriptor??
[   63.090198][ T5499] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
[   63.091327][    T5] usb 8-1: config 0 descriptor??
[   63.100037][ T5141] usb 3-1: media controller created
[   63.109418][ T3819] usb 1-1: config 0 descriptor??
[   63.112128][ T5499] dvbdev: DVB: registering new adapter (MSI DIGI VOX mini II DVB-T USB2.0)
[   63.114964][ T5502] usb 4-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[   63.125603][ T5499] usb 6-1: media controller created
[   63.132576][ T5502] usb 4-1: config 0 descriptor??
[   63.142168][ T5495] dvbdev: DVB: registering new adapter (MSI DIGI VOX mini II DVB-T USB2.0)
[   63.143212][ T5527] usb 7-1: config 0 descriptor??
[   63.157917][ T5141] dvbdev: dvb_create_media_entity: media entity 'dvb-demux' registered.
[   63.166453][ T5495] usb 2-1: media controller created
[   63.173756][ T5501] dvb-usb: found a 'MSI DIGI VOX mini II DVB-T USB2.0' in warm state.
[   63.176858][ T5499] dvbdev: dvb_create_media_entity: media entity 'dvb-demux' registered.
[   63.182723][ T3819] dvb-usb: found a 'MSI DIGI VOX mini II DVB-T USB2.0' in warm state.
[   63.192881][ T5495] dvbdev: dvb_create_media_entity: media entity 'dvb-demux' registered.
[   63.199935][    T5] dvb-usb: found a 'MSI DIGI VOX mini II DVB-T USB2.0' in warm state.
[   63.219479][ T5502] dvb-usb: found a 'MSI DIGI VOX mini II DVB-T USB2.0' in warm state.
[   63.228427][ T5527] dvb-usb: found a 'MSI DIGI VOX mini II DVB-T USB2.0' in warm state.
[   63.234800][ T5495] DVB: Unable to find symbol tda10046_attach()
[   63.238955][ T5501] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
[   63.242941][ T5495] dvb-usb: no frontend was attached by 'MSI DIGI VOX mini II DVB-T USB2.0'
[   63.260031][ T5502] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
[   63.268661][ T5495] dvb-usb: MSI DIGI VOX mini II DVB-T USB2.0 successfully initialized and connected.
[   63.274237][ T5527] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
[   63.283838][ T5141] DVB: Unable to find symbol tda10046_attach()
[   63.292460][    T5] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
[   63.298072][ T5499] DVB: Unable to find symbol tda10046_attach()
[   63.307632][ T5501] dvbdev: DVB: registering new adapter (MSI DIGI VOX mini II DVB-T USB2.0)
[   63.313857][ T5141] dvb-usb: no frontend was attached by 'MSI DIGI VOX mini II DVB-T USB2.0'
[   63.322645][ T3819] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
[   63.331768][ T5499] dvb-usb: no frontend was attached by 'MSI DIGI VOX mini II DVB-T USB2.0'
[   63.341018][ T5501] usb 5-1: media controller created
[   63.349677][ T5141] dvb-usb: MSI DIGI VOX mini II DVB-T USB2.0 successfully initialized and connected.
[   63.357805][ T5501] dvbdev: dvb_create_media_entity: media entity 'dvb-demux' registered.
[   63.364452][ T5495] dvb_usb_m920x: probe of 2-1:0.0 failed with error -71
[   63.373476][ T5502] dvbdev: DVB: registering new adapter (MSI DIGI VOX mini II DVB-T USB2.0)
[   63.379825][ T5499] dvb-usb: MSI DIGI VOX mini II DVB-T USB2.0 successfully initialized and connected.
[   63.389300][ T5527] dvbdev: DVB: registering new adapter (MSI DIGI VOX mini II DVB-T USB2.0)
[   63.405481][ T5495] usb 2-1: USB disconnect, device number 4
[   63.423705][ T5502] usb 4-1: media controller created
[   63.432071][ T5141] dvb_usb_m920x: probe of 3-1:0.0 failed with error -71
[   63.441242][ T5499] dvb_usb_m920x: probe of 6-1:0.0 failed with error -71
[   63.444827][    T5] dvb-usb: MSI DIGI VOX mini II DVB-T USB2.0 error while loading driver (-23)
[   63.452496][ T5141] usb 3-1: USB disconnect, device number 4
[   63.463215][ T3819] dvb-usb: MSI DIGI VOX mini II DVB-T USB2.0 error while loading driver (-23)
[   63.475180][ T5502] dvbdev: dvb_create_media_entity: media entity 'dvb-demux' registered.
[   63.479466][ T5499] usb 6-1: USB disconnect, device number 3
[   63.487430][ T5527] usb 7-1: media controller created
[   63.498946][ T3819] usb 1-1: USB disconnect, device number 3
[   63.526328][    T5] usb 8-1: USB disconnect, device number 3
[   63.533055][ T5501] DVB: Unable to find symbol tda10046_attach()
[   63.539258][ T5501] dvb-usb: no frontend was attached by 'MSI DIGI VOX mini II DVB-T USB2.0'
[   63.554891][ T5527] dvbdev: dvb_create_media_entity: media entity 'dvb-demux' registered.
[   63.573810][ T5502] DVB: Unable to find symbol tda10046_attach()
[   63.582435][ T5502] dvb-usb: no frontend was attached by 'MSI DIGI VOX mini II DVB-T USB2.0'
[   63.595464][ T5501] dvb-usb: MSI DIGI VOX mini II DVB-T USB2.0 successfully initialized and connected.
[   63.610458][ T5502] dvb-usb: MSI DIGI VOX mini II DVB-T USB2.0 successfully initialized and connected.
[   63.625051][ T5527] DVB: Unable to find symbol tda10046_attach()
[   63.631302][ T5527] dvb-usb: no frontend was attached by 'MSI DIGI VOX mini II DVB-T USB2.0'
[   63.640390][ T5527] dvb-usb: MSI DIGI VOX mini II DVB-T USB2.0 successfully initialized and connected.
[   63.649980][ T5501] dvb_usb_m920x: probe of 5-1:0.0 failed with error -71
[   63.657068][ T5502] dvb_usb_m920x: probe of 4-1:0.0 failed with error -71
[   63.666000][ T5502] usb 4-1: USB disconnect, device number 3
[   63.671904][ T5501] usb 5-1: USB disconnect, device number 3
[   63.692111][ T5527] dvb_usb_m920x: probe of 7-1:0.0 failed with error -71
[   63.701852][ T5527] usb 7-1: USB disconnect, device number 3
[   64.012072][ T5141] usb 3-1: new high-speed USB device number 5 using dummy_hcd
[   64.022080][ T5498] usb 6-1: new high-speed USB device number 4 using dummy_hcd
[   64.029592][ T5493] usb 2-1: new high-speed USB device number 5 using dummy_hcd
[   64.372118][ T5141] usb 3-1: config 0 interface 0 has no altsetting 0
[   64.378766][ T5141] usb 3-1: New USB device found, idVendor=10fd, idProduct=1513, bcdDevice=10.94
[   64.387991][ T5141] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[   64.396806][ T5141] usb 3-1: config 0 descriptor??
[   64.422151][ T5498] usb 6-1: config 0 interface 0 has no altsetting 0
[   64.428949][ T5493] usb 2-1: config 0 interface 0 has no altsetting 0
[   64.435697][ T5498] usb 6-1: New USB device found, idVendor=10fd, idProduct=1513, bcdDevice=10.94
[   64.443347][ T5141] dvb-usb: found a 'MSI DIGI VOX mini II DVB-T USB2.0' in warm state.
[   64.444776][ T5493] usb 2-1: New USB device found, idVendor=10fd, idProduct=1513, bcdDevice=10.94
[   64.462190][ T5493] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[   64.462797][ T5141] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
[   64.470218][ T5498] usb 6-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[   64.487971][ T5493] usb 2-1: config 0 descriptor??
[   64.493409][ T5141] dvb-usb: MSI DIGI VOX mini II DVB-T USB2.0 error while loading driver (-23)
[   64.493584][ T5498] usb 6-1: config 0 descriptor??
[   64.552948][ T5498] dvb-usb: found a 'MSI DIGI VOX mini II DVB-T USB2.0' in warm state.
[   64.561647][ T5493] dvb-usb: found a 'MSI DIGI VOX mini II DVB-T USB2.0' in warm state.
[   64.570557][ T5493] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
[   64.580263][ T5498] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
[   64.603112][ T5493] dvb-usb: MSI DIGI VOX mini II DVB-T USB2.0 error while loading driver (-23)
[   64.612554][ T5498] dvb-usb: MSI DIGI VOX mini II DVB-T USB2.0 error while loading driver (-23)
[   64.646414][ T5141] usb 3-1: USB disconnect, device number 5
[   64.752446][ T5498] usb 6-1: USB disconnect, device number 4
[   64.755085][ T5499] usb 2-1: USB disconnect, device number 5
[   69.842880][ T3277] ieee802154 phy0 wpan0: encryption failed: -22
[   69.849195][ T3277] ieee802154 phy1 wpan1: encryption failed: -22
[   71.015042][ T5663] kmemleak: 37 new suspected memory leaks (see /sys/kernel/debug/kmemleak)
BUG: memory leak
unreferenced object 0xffff88812126dd80 (size 192):
  comm "kworker/0:2", pid 3819, jiffies 4294943610 (age 10.160s)
  hex dump (first 32 bytes):
    01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
    00 00 00 00 00 00 00 00 98 dd 26 21 81 88 ff ff  ..........&!....
  backtrace:
    [<000000001aad0d18>] usb_alloc_urb+0x65/0xc0
    [<000000006d9a1714>] usb_urb_init+0x178/0x3b0
    [<00000000767d9d3a>] dvb_usb_adapter_stream_init+0xdf/0x110
    [<0000000045fdb60b>] dvb_usb_device_init.cold+0x50a/0x732
    [<0000000062e5f739>] m920x_probe+0x1dd/0x460
    [<00000000c14b180e>] usb_probe_interface+0x167/0x350
    [<000000003ef5ed9f>] really_probe+0x154/0x490
    [<00000000e7f2d065>] driver_probe_device+0x85/0x100
    [<000000009d74cd50>] __device_attach_driver+0xeb/0x130
    [<00000000f2df55bd>] bus_for_each_drv+0xb1/0xf0
    [<000000000206b741>] __device_attach+0xed/0x240
    [<000000003dd61936>] bus_probe_device+0xc6/0xe0
    [<000000007bec21b0>] device_add+0x566/0xc60
    [<000000001945b181>] usb_set_configuration+0x814/0xb50
    [<000000007cc7572e>] usb_generic_driver_probe+0x86/0xc0
    [<000000007d00fe62>] usb_probe_device+0x5c/0x150

BUG: memory leak
unreferenced object 0xffff888124884300 (size 192):
  comm "kworker/0:2", pid 3819, jiffies 4294943610 (age 10.160s)
  hex dump (first 32 bytes):
    01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
    00 00 00 00 00 00 00 00 18 43 88 24 81 88 ff ff  .........C.$....
  backtrace:
    [<000000001aad0d18>] usb_alloc_urb+0x65/0xc0
    [<000000006d9a1714>] usb_urb_init+0x178/0x3b0
    [<00000000767d9d3a>] dvb_usb_adapter_stream_init+0xdf/0x110
    [<0000000045fdb60b>] dvb_usb_device_init.cold+0x50a/0x732
    [<0000000062e5f739>] m920x_probe+0x1dd/0x460
    [<00000000c14b180e>] usb_probe_interface+0x167/0x350
    [<000000003ef5ed9f>] really_probe+0x154/0x490
    [<00000000e7f2d065>] driver_probe_device+0x85/0x100
    [<000000009d74cd50>] __device_attach_driver+0xeb/0x130
    [<00000000f2df55bd>] bus_for_each_drv+0xb1/0xf0
    [<000000000206b741>] __device_attach+0xed/0x240
    [<000000003dd61936>] bus_probe_device+0xc6/0xe0
    [<000000007bec21b0>] device_add+0x566/0xc60
    [<000000001945b181>] usb_set_configuration+0x814/0xb50
    [<000000007cc7572e>] usb_generic_driver_probe+0x86/0xc0
    [<000000007d00fe62>] usb_probe_device+0x5c/0x150

BUG: memory leak
unreferenced object 0xffff888124884240 (size 192):
  comm "kworker/0:2", pid 3819, jiffies 4294943610 (age 10.160s)
  hex dump (first 32 bytes):
    01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
    00 00 00 00 00 00 00 00 58 42 88 24 81 88 ff ff  ........XB.$....
  backtrace:
    [<000000001aad0d18>] usb_alloc_urb+0x65/0xc0
    [<000000006d9a1714>] usb_urb_init+0x178/0x3b0
    [<00000000767d9d3a>] dvb_usb_adapter_stream_init+0xdf/0x110
    [<0000000045fdb60b>] dvb_usb_device_init.cold+0x50a/0x732
    [<0000000062e5f739>] m920x_probe+0x1dd/0x460
    [<00000000c14b180e>] usb_probe_interface+0x167/0x350
    [<000000003ef5ed9f>] really_probe+0x154/0x490
    [<00000000e7f2d065>] driver_probe_device+0x85/0x100
    [<000000009d74cd50>] __device_attach_driver+0xeb/0x130
    [<00000000f2df55bd>] bus_for_each_drv+0xb1/0xf0
    [<000000000206b741>] __device_attach+0xed/0x240
    [<000000003dd61936>] bus_probe_device+0xc6/0xe0
    [<000000007bec21b0>] device_add+0x566/0xc60
    [<000000001945b181>] usb_set_configuration+0x814/0xb50
    [<000000007cc7572e>] usb_generic_driver_probe+0x86/0xc0
    [<000000007d00fe62>] usb_probe_device+0x5c/0x150

